How to install CarBone Bi-LED headlights in your classic 911 G-model? Tutorial.

To properly install the CarBone Bi-LED headlights in your US. spec. G-model you need to follow these steps:
1. Disconnect the negative battery terminal.
2. Unscrew the Phillips screw at the bottom with a Phillips screwdriver.
3. Pull the outer frame with both hands and disassemble it. (NOTE!!! You may not have the front lamp frame installed).
4. There are two Phillips screws on each side of the frame. Unscrew them.
5. Pull the lamp out from bottom to top.
6. Unplug the H4 lamp and locate two connectors coming from the position lights.
7. When you unplug your left OEM light you will notice two cables (brown and black-gray) coming from the plug through the bumper into the position light.
8. Disconnect the two connectors (or cut and make new end connectors for them).
9. Connect the connectors to the position light pin on the Bi-LED headlight plug.
10. Connect the H4 plug to the H4 socket.
11. Mount the lamp from the top and firmly pull the lamp downwards with both hands. The lamp needs to hang on the ring at the bottom of the frame.
12. Screw the lamp with a flat screwdriver.
13. Connect the negative terminal to the battery.
14. Turn on the lamp to check if it works properly.
We hope that this instruction will help you upgrade your classic 911 with Bi-LED headlights. If you would have any questions feel free to send us a message to [e-mail]

[@tennisplayerjoe]

Easiest install ever

[@8359s]

Are they legal?

[@nelen_co]

Do stock rings fit on these?

[@CarBoneLiveries]

Yes, OEM EU spec. rings fit no problem.

[@gregglen-hoodedratmedia]

Very nice head lights