As a detailer, I love the Fusso Coat 12m month, but 95% of my customer will make the additional investment for an ever longer lasting ceramic coating. As mentioned, don't apply too much wax or wait too long with the buff-out, you will just make it harder for you to remove the excess coating. Additionally I recommend not using the standard applicator, that is included in the wax-can, because its too hard in dry condition and if made wet (as the instructions of the product tell you too, it gets messy and difficult to apply). I use a microfiber applicator, because of the more even spread and ease of application. In my opinion: It's the perfect product for a hobbist, who like's to keep his car shiny and apply a layer of wax once a year! It also fills small scratches and you can coat 15-20 cars with one can easily if you don't use too much product as mentioned!
При 15 градусах тепла и 60 процентах влажности - совершенно не сохнет (ждал 1 час даже), просто сольвентная часть не испаряется. Итог - после хорошей полировки - голограммы, пусть и легкие. 2 месяца и на капоте и крыше уже гидрофил. Это просто снег периодически лежит на них. При этом сбоку - гидрофобит хорошо. Поэтому по нанесению это состав с вопросами. С долговечностью тоже нюансы.
Awesome that you've started posting your videos in English, the translations sounds very good despite using AI. Do I have to apply the wax in a closed showroom like in the video? I'm speaking because an SB-Box is the only place where I'm able to take care of my car.
Do any of you guys know why when I tried to apply the same wax on my bmw f30 black (very soft paint) it left an ugly pattern behind, like a stain. I tried to change the way I was applying the wax, with the sponge wet or dry, in circles or straight lines, I tried even with a microfiber towel, but it was leaving the same stain behind, after wiping off the wax. 😕
Fusso and many other products are using fluoropolymers. These might end up being banned by the EU, but until then I am not sure how I feel about them both environmentally and from a health standpoint. They are low risk to health if you wear gloves, but it will inevitably find its way into groundwater. A great product, but when we can choose PFAS and fluorocarbon free ceramic sealants, I am not sure if I would buy it again.
As a detailer, I love the Fusso Coat 12m month, but 95% of my customer will make the additional investment for an ever longer lasting ceramic coating. As mentioned, don't apply too much wax or wait too long with the buff-out, you will just make it harder for you to remove the excess coating.
Additionally I recommend not using the standard applicator, that is included in the wax-can, because its too hard in dry condition and if made wet (as the instructions of the product tell you too, it gets messy and difficult to apply). I use a microfiber applicator, because of the more even spread and ease of application.
In my opinion: It's the perfect product for a hobbist, who like's to keep his car shiny and apply a layer of wax once a year! It also fills small scratches and you can coat 15-20 cars with one can easily if you don't use too much product as mentioned!
Hello, would you “rate” it higher than Polymer NetShield ?
It's not actually a wax ,it is a sealant.i use it on my trophy winner black MK4 golf GTi. It's a great product.
Is that the only information you have to give?😒
При 15 градусах тепла и 60 процентах влажности - совершенно не сохнет (ждал 1 час даже), просто сольвентная часть не испаряется. Итог - после хорошей полировки - голограммы, пусть и легкие. 2 месяца и на капоте и крыше уже гидрофил. Это просто снег периодически лежит на них. При этом сбоку - гидрофобит хорошо. Поэтому по нанесению это состав с вопросами. С долговечностью тоже нюансы.
Looks a fantastic job there
Awesome that you've started posting your videos in English, the translations sounds very good despite using AI.
Do I have to apply the wax in a closed showroom like in the video? I'm speaking because an SB-Box is the only place where I'm able to take care of my car.
outside too, but in shadow
and not on a hot day
Great video, thank you.
Did you dampen the applicator ?
no, i test it multiple times, not my thing^^
@DetailingSchoolENGLISH that's that then 👌
Do any of you guys know why when I tried to apply the same wax on my bmw f30 black (very soft paint) it left an ugly pattern behind, like a stain. I tried to change the way I was applying the wax, with the sponge wet or dry, in circles or straight lines, I tried even with a microfiber towel, but it was leaving the same stain behind, after wiping off the wax. 😕
Fusso and many other products are using fluoropolymers. These might end up being banned by the EU, but until then I am not sure how I feel about them both environmentally and from a health standpoint. They are low risk to health if you wear gloves, but it will inevitably find its way into groundwater. A great product, but when we can choose PFAS and fluorocarbon free ceramic sealants, I am not sure if I would buy it again.
no the actual one is legal
@ it is for now, but in the coming years they will be banned most likely is what I mean
Do you guys use AI for the English speaking in these videos? Legit question
ua-cam.com/video/u5JTKKQR6Nk/v-deo.html
@@DetailingSchoolENGLISH Thank you for this demonstration and I will give it a try💯💎👍