Jag ser att du opererar utan din egen filmfotograf du också😂😂👍. Det tar också lite tid för dig när skorna ska tas av👏👏. Det är bra att jag inte är ensam om att känna så😂😂👍. Bra video Bjørn👏👏. Hvarfor måste de alltid sette ting der vi har våran kamera🤔🤔😂😂👍
Hahaha.. Ja man får ju härma den bäste lite grann. De e ju fräcka filmer du gör även från utsidan av hytten 👍👍👌👌 Jo men skorna måste ju av, de får ta den tid det tar 🤣🤣 Tack så jättemycket Vidar 😊😊
Well agree to that, but since time i money and the client doesn't pay the diesel bill 😉😉Don't have quick coupler to the hosing as a OQ, so then it's way much more efficient to let it be on
당신의 의견에 감사드립니다. 실제로 기계의 무게 균형에는 큰 결함이 없습니다. 그러나 나는 트럭에 더 잘 다가갈 수 있을 것이라고 생각했기 때문에 조금 어리석게 서 있었습니다. 글쎄, 어쩌면 나는 기계공으로서 정말 형편없는 사람으로 여겨질 수도 있다. 제 영상을 더 많이 보시고 판단해 보세요. 다시 한번 감사드립니다 Google translate. I do hope you understand 😃
Hi. If you think of it in the beginning i do it because i feel in the machine that i don't stand to good to load where i'm at. So to reach the truck safily without pouring the material all over and tip with the bucket from a higher altitude i turn it. I don't feel like i loose anything in speed.. I am that slow 😉😉
Those Compact excavator are not really balanced, i always though those excavator wasnt balanced due of counterweight miss and this video confirmed that !!! sry if my english is bad
I can agree to that they aren't as balanced as a "normally" built excavator. In this video though i stand really bad all from the start. With what i know now about the machine i would have weighted it a little bit from when we got the machine. Next one will be more stabilized 😊 Thank you for your comment 🙏🙏 Sorry for late reply 😉
La seul pelle à pneu que j'ai conduis cnest une takeuchi tb 295w et c'est pratique, mais dans la video il démarre la pelle à pneu il la laisse même pas chauffer
@@satricon Tack för den komplimangen. Tycker väl att om någon tar sig tid att kommentera så får ju jag vara den sista att vara sämre å inte svara 😉 Ja det händer ju emellanåt. Det hade blivit alldeles för stora maskiner och små skopor om det alltid ska vara stabilt. Måste ju leva lite på kanten 😂😂
Jag ser att du opererar utan din egen filmfotograf du också😂😂👍. Det tar också lite tid för dig när skorna ska tas av👏👏. Det är bra att jag inte är ensam om att känna så😂😂👍. Bra video Bjørn👏👏.
Hvarfor måste de alltid sette ting der vi har våran kamera🤔🤔😂😂👍
Hahaha.. Ja man får ju härma den bäste lite grann. De e ju fräcka filmer du gör även från utsidan av hytten 👍👍👌👌 Jo men skorna måste ju av, de får ta den tid det tar 🤣🤣 Tack så jättemycket Vidar 😊😊
Loading with attached tilt-rotator is just wasting diesel...... QuickCoupler are not just for show.
Well agree to that, but since time i money and the client doesn't pay the diesel bill 😉😉Don't have quick coupler to the hosing as a OQ, so then it's way much more efficient to let it be on
liebherr 소선회의 무게 바란스가 좋아보이지는 않네요. 그렇지만 그것을 잘 컨트롤 하는 기사님도 약간 부족해 보입니다. 한국에서 이렇게 하면 혼나요^^~
당신의 의견에 감사드립니다. 실제로 기계의 무게 균형에는 큰 결함이 없습니다. 그러나 나는 트럭에 더 잘 다가갈 수 있을 것이라고 생각했기 때문에 조금 어리석게 서 있었습니다. 글쎄, 어쩌면 나는 기계공으로서 정말 형편없는 사람으로 여겨질 수도 있다. 제 영상을 더 많이 보시고 판단해 보세요. 다시 한번 감사드립니다 Google translate. I do hope you understand 😃
Why would you rotate your Bucket while loading a truck? Seems unnesecery and slow
Hi. If you think of it in the beginning i do it because i feel in the machine that i don't stand to good to load where i'm at. So to reach the truck safily without pouring the material all over and tip with the bucket from a higher altitude i turn it. I don't feel like i loose anything in speed.. I am that slow 😉😉
Woah, that must have felt quite scary! Certainly better to work on level ground, especially with those big wheels.
Well it's not the most pleasant feeling when you're about to tip over on the truck 😉😉
Those Compact excavator are not really balanced, i always though those excavator wasnt balanced due of counterweight miss and this video confirmed that !!! sry if my english is bad
I can agree to that they aren't as balanced as a "normally" built excavator. In this video though i stand really bad all from the start. With what i know now about the machine i would have weighted it a little bit from when we got the machine. Next one will be more stabilized 😊 Thank you for your comment 🙏🙏 Sorry for late reply 😉
😂thats why i never buy compact wheel excavators ,only with a long rear to balance the weight
Once a compact a** you only go compact 🤣🤣🤣🤣
4:02 😊 Było jak na huśtawce 😊
Albo przebywanie na łodzi 😉😉
Bliver inte maskinen mera stødig med bladet nere mot marken ..🤔, var lite nera på at velta...😮
Jo den hade blivit lite mer stabil. Men det hjälper inte mycket när man lastar ut åt sidan. Dessutom är det inte lika spännande 😉😉🤣🤣
It is working close to its furthest reach.
Living on the edge 😉😉😃😃
La seul pelle à pneu que j'ai conduis cnest une takeuchi tb 295w et c'est pratique, mais dans la video il démarre la pelle à pneu il la laisse même pas chauffer
Hi sorry for late answer but this isn't the first thing i do this day. The machine is already warm 😉
Hes good 😂😂😂😂😂
Isn't he.... 🙈🙈🙈😂😂
👍👍👍👍👍
Thanks a lot mate 🤝🤝🤝🤝
maybe closer to the truck
You know it 😉 That's why i moved it later in the video. Seemed like a good place to start but how wrong was i 🤣
Close youre cab mext time bro😉
Like to feel them chilly winds in my face... then i can brag about being out all day 😉😉🤣🤣
@@Maskinistboa hahah yeah understand that bro😅🤣
@@bobberdutchman7944 🤣🤣
Use blade
Too late 😉😉
Don't think the blade in the back had made that much difference. But thanks for the tip 🙏🙏😃😃
Der Chef meint du sollst das schneller machen
I know, i'm a lousy operator but a quite kind guy... that's why they keep me 😃😃
exact varför jag är rädd att köra hjulgrävare ändå utbildar jag mig för att köra hjulgrävare lite envis får man allt vara
Inget att va rädd för. Du får snabbt känsla för vad maskinen går för😉 Lycka till med utbildningen 👍👍
Slab operator, scula bună pe mâna rea
Thanks for your comment. Too bad i don't operate the machine as good as you think i would. Gonna learn more in due time 😊
Amateur
Thanks for your comment 😃 Every day is a lesson 🙏
@@Maskinistboa haha! Gillar att du svarar på alla 😆 tvåhjulslastning sker mer än ibland. Min cat 315 är brutalt ostabil
@@satricon Tack för den komplimangen. Tycker väl att om någon tar sig tid att kommentera så får ju jag vara den sista att vara sämre å inte svara 😉
Ja det händer ju emellanåt. Det hade blivit alldeles för stora maskiner och små skopor om det alltid ska vara stabilt. Måste ju leva lite på kanten 😂😂