HEIDENHAIN | Webinar | Programming with PLANE SPATIAL | Tutorial
Вставка
- Опубліковано 19 чер 2016
- In this webinar the instructor explains how to program a tilted plane using a spatial angle. The participants learn the difference between axis and spatial angles. An example is used for explaining which spatial angles are available and how they are programmed in the control. Based on a workpiece, the correct procedure for tilting is shown and the use of datum shift (Cycle 7), tilting function (PLANE SPATIAL) and the associated resetting are explained. Methods: “Tilting the Working Plane” presentation, programming an example at the programming station (with virtual keyboard)
- Наука та технологія
Thanx for sharing, much appreciated
Yeah we need more on Spatial plane vs Cycle 19 vs M198 usage. In English ofc
What is the difference between cycle 19 and spatial planes
Does it make a difference if we reset the Datum Shift (cycl 7.0) first then reset the plane?
Angle side should be 100.6231 in lenght and angle is 26°33'54.18" if Z minus is 45 and Y plus is 90
Can you explain CAM program DepoCAM please
Where is the PDF Tilting the working plane...?
Dzień dobry.
Jak być z sytuacją gdy muszę przesunąć punkt bazowy na bocznej ściance cylindra gdzie dane wejściowe to przesunięcie w X i Y o 5 mm i kąt 5 stopni (cylinder zamocowany w imadle poziomo, wzdłuż osi X)?
Z góry dziękuję
Sir how to align workpiece in 5axis tnc530 machine without making any changes in program
maybey the touch probe vid wil help you out