There you go man! I was going to say it sounds like you had R3 binded as the enable button which shouldnt be on the view controls :/ well done for figuring that out though! Had to do that so many times with other binds and its difficult when yoy dont understand it at first 😭
I figured it out, you have to disable the "Trim Aircraft" setting and go into the aeliron, rudder, and elevator trim axis settings, bind them to a button (you can turn it off once you set your trim), turn on relative control and set the relative control step to 1% so that the trim only increases by 1% as you trim the different inputs. Also turn down the relative control sensitivty to 10-30%. Then you can slowly trim it in test flight, and press the trim fixation keybind when you have gotten it to trim straight and level, and then it will be saved for when you go into sim battles and you can just go.
I was gonna try this but then i noticed it changed my binds for air rb as well and i had some difficulty getting the throttle back to normal. Everything is fine now tho but sadly wont be trying sim battles
I recommend making your air rb settings, saving them, and then making an air simulator controls save. That way you can just switch back and forth when needed
I see if i can tim to them and idk how im show other Making a vid of my own but ik took away wing swap or Throw vectoring to add them but i say having tim in sim allows me to go afk and come back not into the group lol. But im differently test them out once i get my f-16 into sim ready so can ground pround will being able to fight back.
I’m just wondering , I’m currently in the tut for sim but when I take off my plane drastically changes directions and I can’t seem to control it or figure out why, do you know and tips ?
Hmm what plane are you using?? Might be the flight model as some prop planes tend to be super uncontrollable for console users in sim even with good controls :/ otherwise it sounds like a controls issue and may be a good idea to re-check the yaw, pitch and bank controls to make sure the settings match 😁 hope this helps!
@@gerardoavina7457 yes! But only if your plane is constantly pitching upwards when letting go of any inputs. If it’s changing directions then it may but you in a negative spin
@@strangledegg yes you controls are gray for props and Jets but sometimes props like to move because of their tourque and I get cramps after I play sim so that’s why I have trim. Nice videos btw I use your sim controls to bomb bases with a p51 lol
Lol there's no option to bind the yaw axis in the same way that the game automatically binds the controls that allow you to turn. Regardless, this shit is stupid. All of this just to play a mode designed around pc. Naval battles are a joke. The game is a glorified version of WoT. There are no modes that are playable except ground battles.
These controls are way better then the sim controls the game gives thanks man
No worries mate glad I could help 😁
Thanks man I’m new to the game and I really love the idea of sim but setting up the controls is such a bitch 😂 great video bro
No way new video!
Sorry it took so long 😂 been cooking this one up for a while hahaha
My camera only moves if I keep R3 (xbox) pressed in, I have the same camera settings for y and x axis that you do.......
I tried removing the the bind for enable axis button and it works much better.
There you go man! I was going to say it sounds like you had R3 binded as the enable button which shouldnt be on the view controls :/ well done for figuring that out though! Had to do that so many times with other binds and its difficult when yoy dont understand it at first 😭
My aircraft feels kinda floaty and when i dont touch anything it will eventually negatively pitch enough to crash into the ground, anyway to fix this?
Trim your aircraft maybe? You can trim it in test flight and then use the trim fixation keybind and itll save that when you go in sim battles
I figured it out, you have to disable the "Trim Aircraft" setting and go into the aeliron, rudder, and elevator trim axis settings, bind them to a button (you can turn it off once you set your trim), turn on relative control and set the relative control step to 1% so that the trim only increases by 1% as you trim the different inputs. Also turn down the relative control sensitivty to 10-30%. Then you can slowly trim it in test flight, and press the trim fixation keybind when you have gotten it to trim straight and level, and then it will be saved for when you go into sim battles and you can just go.
You may have to adjust the trim in flight a bit though because of fuel
I was gonna try this but then i noticed it changed my binds for air rb as well and i had some difficulty getting the throttle back to normal. Everything is fine now tho but sadly wont be trying sim battles
I recommend making your air rb settings, saving them, and then making an air simulator controls save. That way you can just switch back and forth when needed
That's pretty much the only way you can do it ^ dunno why you wouldn't save your controls anyway
What about HMD/HMS?
I see if i can tim to them and idk how im show other Making a vid of my own but ik took away wing swap or Throw vectoring to add them but i say having tim in sim allows me to go afk and come back not into the group lol. But im differently test them out once i get my f-16 into sim ready so can ground pround will being able to fight back.
I’m just wondering , I’m currently in the tut for sim but when I take off my plane drastically changes directions and I can’t seem to control it or figure out why, do you know and tips ?
Hmm what plane are you using?? Might be the flight model as some prop planes tend to be super uncontrollable for console users in sim even with good controls :/ otherwise it sounds like a controls issue and may be a good idea to re-check the yaw, pitch and bank controls to make sure the settings match 😁 hope this helps!
If that doesn’t work use trim it helps a lot when cruising
@@gerardoavina7457 yes! But only if your plane is constantly pitching upwards when letting go of any inputs. If it’s changing directions then it may but you in a negative spin
@@strangledegg yes you controls are gray for props and Jets but sometimes props like to move because of their tourque and I get cramps after I play sim so that’s why I have trim. Nice videos btw I use your sim controls to bomb bases with a p51 lol
@@gerardoavina7457 ah cheers dude! I really appreciate the support and love for them and im so glad they help you out 😁
Anyone got controls for Xbox that are good ?
these are
For ps5
And 4 😁 shame i cant do much for xbox but some theoeries are still there to make your own :) use gateway keys as much as you can and experiment 👍
@@strangledeggYou did much for xbox. All i have did do now is practice. Literally this video made me not to give up on simulator with controller
Can you upload your macro? It will be soooo helpful!!
Hey dude!! Ill try my best to! Jist wondering what that is exactly?? And how to upload it 😂
Lol there's no option to bind the yaw axis in the same way that the game automatically binds the controls that allow you to turn.
Regardless, this shit is stupid. All of this just to play a mode designed around pc. Naval battles are a joke. The game is a glorified version of WoT.
There are no modes that are playable except ground battles.
no one asked 😎