Thank you for posting this. This fixed my low flow and only getting about a half gallon out of the tank. I've left your systems installed in houses I've rented and bought them for friends and family. Love your products!
Hi there! Thanks for your comment! We are glad to hear that the video was helpful. If you have any concerns or questions about our products, please contact us at support@ispringfilter.com or 678-261-7611 (M-F 9:00-5:00 EST) for proper assistance. Thank you!
Hi there. Thanks for your comment! For any concerns or questions, please contact us at support@123filter.com or at (678) 801-9308 M-F 8:30-5:30 EST// (678) 261-7611 M-F 8:30-5:30 EST We are happy to help!
Hi there. Thanks for your comment! For any concerns or questions, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) We are happy to help!
Hi dear customer! You can sanitize the system following these steps: - Turn off the feed water adapter. Prepare a bucket to drain the tank. - Remove all the cartridges. - Put 3 tablespoons of bleach (1 tbsp in each vertical filter housing) and reattach to the head unit. - Turn on the feed water adapter until the canisters 1,2,3,4 and the tank is full. (Please do not let the water reach stages 5 or so if you have multiple post filters.) - Let water sit for 2 hours and drain/flush it 2-3 times until all the solution is out before reinstalling all the cartridges. For any questions or concerns, do not hesitate to contact us at support@123filter.com , at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) We are happy to help!
After that entire process, when your tank is finished filling up with water at the end, if you check the pressure, it will be a lot more than the set pressure of around 7 to 9 psi, right? Once I started filling my tank up, I had my pump on the valve while it was filling, and saw the pressure rising quite a bit
Hi there. Yes, the air tank pressure will increase in a full/heavy tank. But in an empty tank, the air tank pressure should be 7-10 psi. If you have any concerns or questions, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) We are happy to help!
Hi there. Thanks for your comment! For any concerns or questions, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) We are happy to help!
Hi dear customer! Our storage tanks come pre-charged from the factory at 7 psi. When the tank is empty of water, the psi of the tank should be between 7 psi minimum and 10 psi maximum air pressure.
Hi there. Thanks for your question! The pressurized tank comes with the amount of pressure needed for the system to work. If you are getting low water flow at the faucet, it might be that your tank has lost pressure, so you will need to check the air tank pressure. The air tank pressure should be 7-10 psi. This should not be done often. If you have any questions or concerns, please, kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) We are happy to help!
So let’s say somebody matched their home water pressure aka 80psi ( like A traditional pressure tank) would this unit be damaged or can it be taken down to 10 psi?
Hi there. The air tank pressure should be 7-10 psi to optimize the performance of the system. For further concerns or questions, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST We are happy to help!
I don't have the tools in this video. I only have a regular tire guage (not digital), and I have an electric air compressor. Will these work? I'm worried about exploding the tank with too much air.
Hi there. It would work as long as the gauge is accurate so you can check the air pressure is between 7-10 psi. If the pressure is below or above, the system won’t work properly. If you have any questions or concerns, please contact us at support@123filter.com or at (678) 801-9308 M-F 8:30-5:30 EST//(678) 261-7611 M-F 8:30-5:30 EST to properly guide you. We are happy to help!
Hi there. Please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) to properly guide you.
Hi there! Thank you for your feedback! We have several installation and filter replacement videos available on our channel. If you need any further guidance or have specific questions about replacing the filters, feel free to reach out to us at support@123filter.com or call 678-261-7611 (M-F 9:00-5:00 EST). We’re happy to assist you! Thank you!
¡Hola! Depende del modelo del sistema que usted tenga. Si tiene un modelo RCC, la proporción de agua filtrada a agua residual es de 1:3. Si tiene un sistema con bomba como el RCC7P o RCC1UP-AK, la proporción de agua filtrada a agua residual es de 1:1.5. Si tiene el sistema sin tanque RO500, la proporción de agua filtrada a agua residual es de 2:1, y así tenemos más sistemas que tienen diferente proporción de agua filtrada a agua residual. Si tiene alguna duda o pregunta, por favor contáctenos a support@123filter.com , al (678) 261-7611 M-F 8:30-5:30 EST o al (470) 560-0012 (Solo mensajes) para ayudarlo adecuadamente.
Hi there. You can use a bicycle pump. For further concerns or questions, please contact us at support@123filter.com or at (678) 801-9308 M-F 8:30-5:30 EST// (678) 261-7611 M-F 8:30-5:30 EST. We are happy to help!
What if the water tank is not getting empty even after I shutoff the value and opened the facut ? The tank feels very heavy . So removed completely and manually emptied the tank but Iam concerned this tank is bad now😢 Doesn’t that mean I need to replace new tank?
Hi there! Pressurizing your tank doesn’t increase or decrease wastewater. If you have any concerns or questions, please reach out to us at support@123filter.com or 678-261-7611 (M-F 9:00-5:00 EST) for proper assistance. Thank you!
Hi there. The air tank pressure should be 7-10 psi. For any concerns or questions, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST. We are happy to help!
Same here. I don't get it. I'm guessing the total pressure WITH water shouldn't exceed 100psi. I'll just follow the 7 - 10 psi instructions I've seen in so many vids. If it doesn't work. Then I'll take it from there.
The problem with this is if the bladder in the tank is defective, you cannot empty the tank, and all the water will not drain out so you cannot get an accurate pressure reading. The bladder provides the pressure. If you have low pressure and you repressurize and the pressure doesnt hold, the bladder is leaking. You need to replace the tank.
Hi there! Thanks for your comment! If the pressure doesn’t hold after re-pressurizing, it’s a clear sign that the bladder is damaged and the tank needs to be replaced. If you have any questions or concerns, please reach out to us at support@ispringfilter.com or 678-261-7611 (M-F 9:00-5:00 EST) for proper assistance. Thank you!
Hi there! If water is coming out of the air valve, it indicates that the tank is likely faulty. Please, contact us at support@123filter.com or 678-261-7611 (M-F 9:00-5:00 EST) for proper assistance as soon as possible. Thank you!
Hi there. Our tanks come pressurized. However, the tank might lose pressure over time, so you will need to pressurize it. The air tank pressure should be 7-10 psi. If you have any concerns or questions, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) We are happy to help!
Hi there! The tanks may lose pressure over time. If you notice low water flow, it could be a sign that the tank needs to be pressurized. Please check the air tank pressure to address this issue. If you have any concerns or questions about our products, please contact us at support@123filter.com or at 678-261-7611 (M-F 8:30-5:30 EST). We are here to help!
Hi there! Thanks for your comment! If you have any questions or concerns, do not hesitate to contact us at support@ispringfilter.com or 678-261-7611 (M-F 9:00-5:00 EST) for proper assistance. Thank you!
what if the ASV was just replaced and I checked the PSI to 9 with the empty tank and it still won't stop running. I tested the one way valve too. it just runs.
Hi dear customer! Could you please check if your inlet water pressure is at least 45 psi? If your inlet water pressure is below 45 psi, a booster pump should be added to increase the pressure through the system. Please, kindly contact us at support@123filter.com to properly help you as soon as possible. Thanks!
@@iSpringWaterSystems oh how do I check the PSI of the city water? it used to work for years so I am thinking maybe it could be lower in the summer or it can also be the flow restrictor? I am not sure.
Hi there! Could you please provide more details about your query? This will help us assist you better. Please reach out to us at support@123filter.com or 678-261-7611 (M-F 9:00-5:00 EST) for proper assistance. Thank you!
Hi there. Please, make sure that the tank is full. The tank takes 1-2 hours to fill. Also, check that everything is properly installed and there is not any crimped tube. If you still have low flow, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) to properly guide you. We are happy to help!
Hi there! The tank should be empty to get an accurate reading. The air tank pressure should be 7-10 psi. If you have any concerns or questions, please reach out to us at support@ispringfilter.com or 678-261-7611 (M-F 9:00-5:00 EST) for proper assistance. Thank you!
Hi there. The air tank pressure should be 7-10 psi. For any concerns or questions, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST. We are happy to help!
If you want to maximize flow rate, would closer to 10psi be best? I've replaced filters and membrane and still have low water flow. Going to pressurize it next...
Hi there. You will get the same flow rate if it is at 7 or 10 psi. If you still have a low water flow issue, please contact us at support@123filter.com or at (678) 801-9308 M-F 8:30-5:30 EST//(678) 261-7611 M-F 8:30-5:30 EST to help you.
Hi there! The air tank pressure should be between 7-10 psi for optimal performance. Going above this range may affect the system's efficiency and functionality. If you have any further questions or concerns, please feel free to reach out to us at support@123filter.com or call us at 678-261-7611 (M-F 9:00-5:00 EST). Thank you!
Hi dear customer! To get an accurate reading, the tank should be empty. Could you please verify if the tank is losing pressure? If you face any issues with the tank, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST to properly help you!
Hi there! Depending on the model of your tank, the valve (nipple) is usually located either on the top or at the bottom of the tank. If you have any questions or concerns, feel free to reach out to us at support@123filter.com or 678-261-7611 (M-F 9:00-5:00 EST) for further assistance. Thank you!
Hi dear customer! If you have any questions about our products, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST, or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) We are happy to help!
Hi there. If you have no water or a low water flow issue, please take into account that the tank takes 1-2 hours to fill. Also, please check the air tank pressure. It should be 7-10 psi. For further concerns or questions, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST. We are happy to help!
Hi dear customer! Thanks for your comment! We recommend sanitizing the systems once in a while. We have systems for your different needs. You might want to check our blog about the tank vs tankless systems: www.ispringfilter.com/ac/reverse-osmosis-water-filter-tankless-ro-water-filter-tank-ro-water-filter-reverse-osmosis--ro-water-filtration-system If you have any concerns or questions about our products, please kindly contact us at support@123filter.com or at 678-261-7611 M-F 8:30-5:30 EST We are here to help!
Hi there! The tanks may lose pressure during transportation or over time. If you notice low water flow, it could be a sign that the tank needs to be pressurized. Please check the air tank pressure to address this issue.
Hi dear customer! If you have already replaced the filters and pressurized your tank at 7-10 psi and you still have low water flow, it might be that you are experiencing a constant drain issue. Please, refer to this video: ua-cam.com/video/t4rPacnCKVo/v-deo.html Please, kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST to properly help you as soon as possible.
@@iSpringWaterSystems I watched the video you send me I test the exact way shows in the video I don't have drain issue I will try explain more my osmosis system one year old but I still replaced all five filters last week and I replaced the Tank itself again because I watched your video I thought Tank was bad Tank Air pressure without water is 7.5 psi with Full water 14 psi but you mentioned in this video full water tank should be 35 to 40 psi , my problem is when I open the drinking water Faucet the water flow not strong just slow even though tank is full water I wish I could download the video here so you can see how is the water flow my old Osmosis 4 stage filer water flow from faucet was very strong
Hi there. If you need some help with our systems, please kindly contact us at support@123filter.com and at (678) 801-9308 M-F 8:30-5:30 EST or (678) 261-7611 M-F 8:30-5:30 EST We are happy to help!
Hi there. The air tank pressure should be 7-10 psi. For any concerns or questions, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST. We are happy to help!
Straight to the point. Love it. No time for 15 min vid. 😂
Aint nobody got time for dat!
Thank you for posting this. This fixed my low flow and only getting about a half gallon out of the tank. I've left your systems installed in houses I've rented and bought them for friends and family. Love your products!
Hi there! Thanks for your comment! We are glad to hear that the video was helpful.
If you have any concerns or questions about our products, please contact us at support@ispringfilter.com or 678-261-7611 (M-F 9:00-5:00 EST) for proper assistance. Thank you!
Yep , great info. Solved the issue I was having. Had to use my Viair electric pump to get my 7 gallon tank up to 9psi, a hand pump couldn't do it.
Hi there. Thanks for your comment!
For any concerns or questions, please contact us at support@123filter.com or at (678) 801-9308 M-F 8:30-5:30 EST// (678) 261-7611 M-F 8:30-5:30 EST
We are happy to help!
Great video! Thank you. Wish I would have found it months ago.
I did it. It works perfectly. Thank you so much.
Hi there. Thanks for your comment!
For any concerns or questions, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only)
We are happy to help!
Thank you for the great information
Should you empty the tank after so much time to clean the inside properly and if so, how do you recommend cleaning it, just adding some bleach??
Hi dear customer! You can sanitize the system following these steps:
- Turn off the feed water adapter. Prepare a bucket to drain the tank.
- Remove all the cartridges.
- Put 3 tablespoons of bleach (1 tbsp in each vertical filter housing) and reattach to the head unit.
- Turn on the feed water adapter until the canisters 1,2,3,4 and the tank is full. (Please do not let the water reach stages 5 or so if you have multiple post filters.)
- Let water sit for 2 hours and drain/flush it 2-3 times until all the solution is out before reinstalling all the cartridges.
For any questions or concerns, do not hesitate to contact us at support@123filter.com , at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only)
We are happy to help!
After that entire process, when your tank is finished filling up with water at the end, if you check the pressure, it will be a lot more than the set pressure of around 7 to 9 psi, right? Once I started filling my tank up, I had my pump on the valve while it was filling, and saw the pressure rising quite a bit
Hi there. Yes, the air tank pressure will increase in a full/heavy tank. But in an empty tank, the air tank pressure should be 7-10 psi.
If you have any concerns or questions, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only)
We are happy to help!
Great tip, thank you!
Hi there. Thanks for your comment!
For any concerns or questions, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only)
We are happy to help!
Great information can i know if this tank Broken into air tank what we need to do
If the tank does not hold air, you will need to replace it.
@@iSpringWaterSystems thank you so much for replying me
What would the maximum bladder pressure be for a 14 gallon tank?
Hi dear customer! Our storage tanks come pre-charged from the factory at 7 psi. When the tank is empty of water, the psi of the tank should be between 7 psi minimum and 10 psi maximum air pressure.
How often are you suppose to pressurize the tank?
Hi there. Thanks for your question! The pressurized tank comes with the amount of pressure needed for the system to work. If you are getting low water flow at the faucet, it might be that your tank has lost pressure, so you will need to check the air tank pressure. The air tank pressure should be 7-10 psi. This should not be done often.
If you have any questions or concerns, please, kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only)
We are happy to help!
So let’s say somebody matched their home water pressure aka 80psi ( like A traditional pressure tank) would this unit be damaged or can it be taken down to 10 psi?
U can try reducing the pressure back to 8 t0 10 psi and chk, the bladder seal might have been compromised but you can give a try.
Hi there. The air tank pressure should be 7-10 psi to optimize the performance of the system.
For further concerns or questions, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST
We are happy to help!
wish I could give this video two thumbs up!
I don't have the tools in this video. I only have a regular tire guage (not digital), and I have an electric air compressor. Will these work? I'm worried about exploding the tank with too much air.
Hi there. It would work as long as the gauge is accurate so you can check the air pressure is between 7-10 psi. If the pressure is below or above, the system won’t work properly.
If you have any questions or concerns, please contact us at support@123filter.com or at (678) 801-9308 M-F 8:30-5:30 EST//(678) 261-7611 M-F 8:30-5:30 EST to properly guide you.
We are happy to help!
What if its going to 2 fridges how do i mimic the faucet staying open?
Hi there. Please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) to properly guide you.
Can you do a video almost step one through five on how to replace filters when it's time to do so Is the whole system
Hi there! Thank you for your feedback! We have several installation and filter replacement videos available on our channel. If you need any further guidance or have specific questions about replacing the filters, feel free to reach out to us at support@123filter.com or call 678-261-7611 (M-F 9:00-5:00 EST). We’re happy to assist you! Thank you!
Deshecha mucha agua, es más la que tira que la que se usa, o está mal la conección?
¡Hola! Depende del modelo del sistema que usted tenga. Si tiene un modelo RCC, la proporción de agua filtrada a agua residual es de 1:3. Si tiene un sistema con bomba como el RCC7P o RCC1UP-AK, la proporción de agua filtrada a agua residual es de 1:1.5. Si tiene el sistema sin tanque RO500, la proporción de agua filtrada a agua residual es de 2:1, y así tenemos más sistemas que tienen diferente proporción de agua filtrada a agua residual.
Si tiene alguna duda o pregunta, por favor contáctenos a support@123filter.com , al (678) 261-7611 M-F 8:30-5:30 EST o al (470) 560-0012 (Solo mensajes) para ayudarlo adecuadamente.
Amazing
what kind of hand pump can we use?
Hi there. You can use a bicycle pump.
For further concerns or questions, please contact us at support@123filter.com or at (678) 801-9308 M-F 8:30-5:30 EST// (678) 261-7611 M-F 8:30-5:30 EST.
We are happy to help!
What if the water tank is not getting empty even after I shutoff the value and opened the facut ?
The tank feels very heavy . So removed completely and manually emptied the tank but Iam concerned this tank is bad now😢
Doesn’t that mean I need to replace new tank?
Hi there! Please, contact us at support@123filter.com or 678-261-7611 (M-F 8:30-5:30 EST) to properly help you as soon as possible. Thank you!
Does this increase the wastewater produced if you don't have a permeate pump?
Hi there! Pressurizing your tank doesn’t increase or decrease wastewater.
If you have any concerns or questions, please reach out to us at support@123filter.com or 678-261-7611 (M-F 9:00-5:00 EST) for proper assistance. Thank you!
How long before the tank is full again?
Hi dear customer! The tank takes up to 2 hours to fill.
max 3 hours
Hi on ispring water systems water tank is written 100psi maximum working pressure,so i m confused what air pressure need?
Hi there. The air tank pressure should be 7-10 psi.
For any concerns or questions, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST.
We are happy to help!
Same here. I don't get it. I'm guessing the total pressure WITH water shouldn't exceed 100psi. I'll just follow the 7 - 10 psi instructions I've seen in so many vids. If it doesn't work. Then I'll take it from there.
The problem with this is if the bladder in the tank is defective, you cannot empty the tank, and all the water will not drain out so you cannot get an accurate pressure reading. The bladder provides the pressure. If you have low pressure and you repressurize and the pressure doesnt hold, the bladder is leaking. You need to replace the tank.
Hi there! Thanks for your comment! If the pressure doesn’t hold after re-pressurizing, it’s a clear sign that the bladder is damaged and the tank needs to be replaced.
If you have any questions or concerns, please reach out to us at support@ispringfilter.com or 678-261-7611 (M-F 9:00-5:00 EST) for proper assistance. Thank you!
If water comes out from the air valve, is a tank bad?
Hi there! If water is coming out of the air valve, it indicates that the tank is likely faulty.
Please, contact us at support@123filter.com or 678-261-7611 (M-F 9:00-5:00 EST) for proper assistance as soon as possible. Thank you!
Wait im supposed to put air in the tank?
Hi there. Our tanks come pressurized. However, the tank might lose pressure over time, so you will need to pressurize it. The air tank pressure should be 7-10 psi.
If you have any concerns or questions, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only)
We are happy to help!
How often does it require a psi top up
Hi there! The tanks may lose pressure over time. If you notice low water flow, it could be a sign that the tank needs to be pressurized. Please check the air tank pressure to address this issue.
If you have any concerns or questions about our products, please contact us at support@123filter.com or at 678-261-7611 (M-F 8:30-5:30 EST). We are here to help!
Perfect! My family thinks I’m smart for fixing this!
Hi there! Thanks for your comment!
If you have any questions or concerns, do not hesitate to contact us at support@ispringfilter.com or 678-261-7611 (M-F 9:00-5:00 EST) for proper assistance.
Thank you!
what if the ASV was just replaced and I checked the PSI to 9 with the empty tank and it still won't stop running. I tested the one way valve too. it just runs.
Hi dear customer! Could you please check if your inlet water pressure is at least 45 psi? If your inlet water pressure is below 45 psi, a booster pump should be added to increase the pressure through the system. Please, kindly contact us at support@123filter.com to properly help you as soon as possible. Thanks!
@@iSpringWaterSystems oh how do I check the PSI of the city water? it used to work for years so I am thinking maybe it could be lower in the summer or it can also be the flow restrictor? I am not sure.
What if you don’t have anything going through?
Hi there! Could you please provide more details about your query? This will help us assist you better.
Please reach out to us at support@123filter.com or 678-261-7611 (M-F 9:00-5:00 EST) for proper assistance. Thank you!
I did pressurize my brand new kit, but is still coming super low flow 😢
Hi there. Please, make sure that the tank is full. The tank takes 1-2 hours to fill. Also, check that everything is properly installed and there is not any crimped tube. If you still have low flow, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) to properly guide you.
We are happy to help!
So without water between 7 to 10 psi and with water no more than 100 psi ?
Hi there! The tank should be empty to get an accurate reading. The air tank pressure should be 7-10 psi.
If you have any concerns or questions, please reach out to us at support@ispringfilter.com or 678-261-7611 (M-F 9:00-5:00 EST) for proper assistance. Thank you!
Hi on ispring water systems water tank T32M is written 100psi maximum working pressure,so i m confused what air pressure need?
Hi there. The air tank pressure should be 7-10 psi.
For any concerns or questions, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST.
We are happy to help!
If you want to maximize flow rate, would closer to 10psi be best? I've replaced filters and membrane and still have low water flow. Going to pressurize it next...
Hi there. You will get the same flow rate if it is at 7 or 10 psi.
If you still have a low water flow issue, please contact us at support@123filter.com or at (678) 801-9308 M-F 8:30-5:30 EST//(678) 261-7611 M-F 8:30-5:30 EST to help you.
You'll probably have to install a booster pump. Did that on one of my ro systems after checking and changing everything. Works great now!
Where in the system is the boost pump installed? Is it after the water has been filtered? @9286anthony
what if I go above 10 psi? I want a water jet
Hi there! The air tank pressure should be between 7-10 psi for optimal performance. Going above this range may affect the system's efficiency and functionality. If you have any further questions or concerns, please feel free to reach out to us at support@123filter.com or call us at 678-261-7611 (M-F 9:00-5:00 EST). Thank you!
Cam I do 15 psi? With 10 water still flows same as with 5
Hi dear customer! To get an accurate reading, the tank should be empty. Could you please verify if the tank is losing pressure?
If you face any issues with the tank, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST to properly help you!
my tank doesnt have a vave to pump air in.
Hi there! Depending on the model of your tank, the valve (nipple) is usually located either on the top or at the bottom of the tank. If you have any questions or concerns, feel free to reach out to us at support@123filter.com or 678-261-7611 (M-F 9:00-5:00 EST) for further assistance. Thank you!
Info
Hi dear customer! If you have any questions about our products, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST, or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only)
We are happy to help!
The water in tank doesn’t go out of tank
Hi there. If you have no water or a low water flow issue, please take into account that the tank takes 1-2 hours to fill. Also, please check the air tank pressure. It should be 7-10 psi.
For further concerns or questions, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST.
We are happy to help!
Best system is without storage tank,after time bacterias build up in the tank and clean water is not so clean
Hi dear customer! Thanks for your comment!
We recommend sanitizing the systems once in a while.
We have systems for your different needs. You might want to check our blog about the tank vs tankless systems:
www.ispringfilter.com/ac/reverse-osmosis-water-filter-tankless-ro-water-filter-tank-ro-water-filter-reverse-osmosis--ro-water-filtration-system
If you have any concerns or questions about our products, please kindly contact us at support@123filter.com or at 678-261-7611 M-F 8:30-5:30 EST
We are here to help!
Wait. $350 for the filter system and 180 every 8 months to replace filters and you still have to do this?
Hi there! The tanks may lose pressure during transportation or over time. If you notice low water flow, it could be a sign that the tank needs to be pressurized. Please check the air tank pressure to address this issue.
not true I done this many times i even replaced my filters and tank still same low water flow
Hi dear customer! If you have already replaced the filters and pressurized your tank at 7-10 psi and you still have low water flow, it might be that you are experiencing a constant drain issue.
Please, refer to this video:
ua-cam.com/video/t4rPacnCKVo/v-deo.html
Please, kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST to properly help you as soon as possible.
@@iSpringWaterSystems I watched the video you send me I test the exact way shows in the video I don't have drain issue I will try explain more my osmosis system one year old but I still replaced all five filters last week and I replaced the Tank itself again because I watched your video I thought Tank was bad Tank Air pressure without water is 7.5 psi with Full water 14 psi but you mentioned in this video full water tank should be 35 to 40 psi , my problem is when I open the drinking water Faucet the water flow not strong just slow even though tank is full water I wish I could download the video here so you can see how is the water flow my old Osmosis 4 stage filer water flow from faucet was very strong
🙏🙏👍👍
👌👌👌👌
Too much hassle. I just bought a distiller and I ain't looking back.
Hi there. If you need some help with our systems, please kindly contact us at support@123filter.com and at (678) 801-9308 M-F 8:30-5:30 EST or (678) 261-7611 M-F 8:30-5:30 EST
We are happy to help!
Hi on ispring water systems water tank is written 100psi maximum working pressure,so i m confused what air pressure need?
Hi there. The air tank pressure should be 7-10 psi.
For any concerns or questions, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST.
We are happy to help!
That means the tank will blow at 100psi