followed all the instructions but when iu powered back on, the camera tilted to the side. I have control but it's giving itself a command to rotate. Any idea what I did wrong?
Mini 2 has downward vision sensor error codes and no video or camera display. Has had new ribbon cable so is it possible that a faulty PTZ cable and/or camera module could cause these errors? 🤔
I’ve just used this video to instruct me on changing camera and gimbal from one mini 2 to another; this video doesn’t make sense in the fact that your drone will recognise it’s a different camera and give error codes when turning on. Mine for instance, when turned on the camera moves but then behaves as if it is stuck. On the phone app it gives a 20021 error code, when I checked the code it states what I’ve just said about the drone realised the different software and won’t calibrate. If anyone knows what I can do to save me sending to DJI who I suspect won’t touch it after I’ve allowed some UA-camr to mislead me into thinking you can just swop one for another when you definitely can’t I’d appreciate it
Halo please halp me !!! I already get new gimbal for my dji mini 2 becouse old gimbal the motor gimbal burn but in my new gimbal the problem still same the gimbal motor really hot then i touch and i get notice on dji app gimbal stuck, everybody know how to fix ?
Would it be possible to put a 4k camera replacement into the mini se?
followed all the instructions but when iu powered back on, the camera tilted to the side. I have control but it's giving itself a command to rotate. Any idea what I did wrong?
Any progress with your drone? If you read my comment please tell me if it’s the same situation
Thanks
Mini 2 has downward vision sensor error codes and no video or camera display. Has had new ribbon cable so is it possible that a faulty PTZ cable and/or camera module could cause these errors? 🤔
I’ve just used this video to instruct me on changing camera and gimbal from one mini 2 to another; this video doesn’t make sense in the fact that your drone will recognise it’s a different camera and give error codes when turning on. Mine for instance, when turned on the camera moves but then behaves as if it is stuck. On the phone app it gives a 20021 error code, when I checked the code it states what I’ve just said about the drone realised the different software and won’t calibrate.
If anyone knows what I can do to save me sending to DJI who I suspect won’t touch it after I’ve allowed some UA-camr to mislead me into thinking you can just swop one for another when you definitely can’t I’d appreciate it
You have to calibrate the motors of the gimbal with a software called python. I don't know how but I'll find out when my gimbal arrive.
Hello! Do You have a schematic pinout camera? I Need know the shutter pin. Can you help me?
16:33
Don’t mind this comment I’m just stamping so I can come back when I get my new camera
do we need calibration or something else related software after replacing the camera?
No, it shouldn't, but with every new drone software update, DJI is constantly making some changes to the hardware and calibration may be required.
What's the purpose of that blue glue on the back of camera beside strip?
Most likely thermal paste, to distribute heat from the board to the heat sink
Wie wird das Ganze kalibriert ?
That’s what I want to know?
Halo please halp me !!! I already get new gimbal for my dji mini 2 becouse old gimbal the motor gimbal burn but in my new gimbal the problem still same the gimbal motor really hot then i touch and i get notice on dji app gimbal stuck, everybody know how to fix ?