Hi Bikash, I just watched your video. You have done a great job. You have explained PA HA clearly. I subscribed to your channel. Congratulation and good luck with your channel!!!!!!!!!!
Thank you so much sir ......i was struggling to find a way but getting error for HA 1 down ...so followed all your step post restart by HA pa....allll gooood 🙏
The Ip you gave for the HA we can give anything the only thing is it should be same on both the sides or we have to do any other config to in order me make this topology work?
Great video. I still have one simple question though, how the failover works in PA. Is it like ASA where primary IP gets assigned to the active firewall or both firewall retain their respective IPs and the active one starts advertising it's own IP address?
If Active gets Fail, the Standby will do gratitious arp (update the arp table of switch ) So that switch will start forwarding the traffic to standby (Which became Active after failover). :-)
Hi friend. Thanks for sharing knowledge with the community. I would like to ask you three questions, the first is, What version of IOS of PAN do you use for these labs? These same labs can be emulated in GNS3, right? And finally, could you give me the name of the DIGITAL BOARD that you use, to be able to download it? I mean that program that lets you make lines and drawings on the screen. Thanks for your answers. Greetings.
Hi Ranghel, Thanks for comment. 1. I am using PAN 8.0.1 2. I am not sure, either it can be emulated in gns3 as i am using eve-ng instead. 3. I am using Epic Pen application to write on screen. Please find the below link for setting the eve-ng lab ua-cam.com/video/2uRWAq-IQ_0/v-deo.html
Your teaching ability are so perfect which make's easy to get each and every point & concepts to be clear. Thank you so much.
Excellent work Bikash ! you explained everything in a. very simple way .
Hi Bikash, I just watched your video. You have done a great job. You have explained PA HA clearly. I subscribed to your channel. Congratulation and good luck with your channel!!!!!!!!!!
Thank you so much sir ......i was struggling to find a way but getting error for HA 1 down ...so followed all your step post restart by HA pa....allll gooood 🙏
Thank you Bikash sir
Very informative 👏 👌
thanks for explaining my dought has clear for active and passive
Thanks sir you are a great teacher ...Guru ji...thanks a lot...
Great video
Very Good Video . thanks, for sharing.
The Ip you gave for the HA we can give anything the only thing is it should be same on both the sides or we have to do any other config to in order me make this topology work?
Good one.. 👍
Thank you soo much sir!!!!!!
Can we get the steps in text format about firewall movement from copper cable connectivity to fibre cable connectivity into a HA setup
What is your PC default gateway. since the two firewall have different ip address that are connected to inside network
What configuration have you done on Inside two SW connected to PA in HA..................Does link b/w SW & PA is Layer 3 or Layer 2 (Trunk).....
How we do this in virtual machine
Great effort ... thanks you so much ...I need to arrange Same setup for practice...help me how to do
Great video.
I still have one simple question though, how the failover works in PA.
Is it like ASA where primary IP gets assigned to the active firewall or both firewall retain their respective IPs and the active one starts advertising it's own IP address?
Doubt : If we change the Management IP will the HA impacted?
What will gratitious arp do? When active gets fail?
If Active gets Fail, the Standby will do gratitious arp (update the arp table of switch ) So that switch will start forwarding the traffic to standby (Which became Active after failover). :-)
Does GARP happen on all the interfaces of the passive device when active fails?
Do you have any lecture on configuring Backup links for HA1 and HA2 and also Floating IPS
Thanks for comment. No i don't have it. If i get more like and subscriber i can built one.
In your diagram, what will happen if PaloAlto1 is the active firewall AND Switch2 goes down?
Warm-up your resume :)
@@hvcool what does it mean
You must mention IP addressing as well on diagram for better understating
Thanks for your feedback. I will mentioned in coming videos.
Can you share the configs of the switches?
it sample topology. I have not done any configuration in switch.
Hi friend. Thanks for sharing knowledge with the community. I would like to ask you three questions, the first is, What version of IOS of PAN do you use for these labs? These same labs can be emulated in GNS3, right? And finally, could you give me the name of the DIGITAL BOARD that you use, to be able to download it? I mean that program that lets you make lines and drawings on the screen. Thanks for your answers. Greetings.
Hi Ranghel,
Thanks for comment.
1. I am using PAN 8.0.1
2. I am not sure, either it can be emulated in gns3 as i am using eve-ng instead.
3. I am using Epic Pen application to write on screen.
Please find the below link for setting the eve-ng lab
ua-cam.com/video/2uRWAq-IQ_0/v-deo.html