Fuel Rail Pressure Sensor Diagnostics | Test & Fix P0191 Fuel Rail Pressure Sensor Circuit
Вставка
- Опубліковано 24 сер 2024
- In this video I show you how I test the fuel rail pressure sensor when there is P0191 Fuel Rail Pressure Sensor Circuit Range/Performance fault code. I perform the test on a KIA Rio 2012 with GDi fuel system. During diagnostic, I explain the wiring diagram for sensor, I explain the step by step diagnosis on the wiring and at the same time I show you how o find the wires and pins on sensor connector and PCM connector. I also explain how to test the sensor operation by monitoring the live data on scan tool.
You might be interested in watching the following videos too:
How to Use Hyundai & KIA OEM Scan Tool (GDS) | Diagnostic, Wiring Diagrams, workshop manuals
• How to Use Hyundai & K...
Test & Fix P0090 Fuel Pressure Regulator Control Circuit / Open
• Test & Fix P0090 Fuel ...
How to Fix P0366 Camshaft Position Sensor B Circuit Range/Performance Fault Code
• Camshaft Position Sens...
#p0191 #fuelsystem #engine #gdi #kia #hyundai
Disclaimer:
Any information contained in this video is just the understanding of “KIA & Hyundai Diagnostics” and it is not an official guide or reference, so everything provided in this video is just a share of our experience and understanding and they are provided as a courtesy for your reference only. So, if you are using any part of this video, use the information at your own risk. We highly advise you to check the manufacturer owner’s manual before performing any act of removal, diagnosis, inspection, or repair on your car to know about what you are authorized to do on your car, what the correct and legal procedure is and what risks might be involved, also viewers are strongly advised to consult a licensed person before any sort of inspection or repair. Due to the factors beyond the control of “KIA & Hyundai Diagnostics”, we cannot guarantee against improper use of information or tools or systems, or the procedure provided. “KIA & Hyundai Diagnostics” disclaims any damage, injury or loss caused by your decision to follow the steps provided in this video.
You might be interested in watching the following video too:
Test & Fix P0090 Fuel Pressure Regulator Control Circuit / Open
ua-cam.com/video/b-5j0O9nYKs/v-deo.html
Thanks, very informative video.
Thanks for watching
Hi brother actually my car is just like both the pressure bar are nearly the same lets say 40 bar by 39.9 or 40 for the pressure but some time when the engine is too cold after driving for 100 meters my car pressure would stuck at 5.5 bar but after turning the ignition of and turned back on they will be same again this happens once a day when the engine is to cold so do you thing my high pressure sensor has aproblem and i have to replace it or what. Thanks man
Hi my friend. 5.5 bar means that the high pressure system is not working. have you checked the fuel pressure regulator valve connector? it's on the high pressure pump.
@@GoProAuto hi brother, no I haven't check them but with OBD it's only given rail pressure sensor, my car is just running well only this happen when the engine is cold, so I am assuming the high pressure sensor might not work perfectly so right now I don't know what to do.
❤❤❤
👍👍👍
❤ good information thank you🙏🙏
Thanks for watching