Aliexpress DRSSTC Repair and Upgrades
Вставка
- Опубліковано 6 січ 2024
- After blowing up some components, I decided to revive the coil with some genuine parts from Mouser, as well as convert the coil to run at full power on 120V, rather than its original 220V.
Here are the parts I used:
Elec Caps: 381LQ681M250H052 680uF 250V
Tank Cap: 940C30P1K-F 0.1uF 3Kv
IGBT: FGA60N65SMD 60A 650v
Rectifier: GBU3510H_T0_00601 15A 1Kv
*This video was filmed before I zapped it with the big Tesla Coil. I had forgotten about it.
Music from freetousemusic.com
Jam by LuKremBo
Autumn by LuKremBo - Наука та технологія
i was waiting for this video nice job
Tienes el laboratorio de la nasa a tu disposición verdad 😮
Curious why you converted from 240 to 120?
Also would you be interested in making a guide to build this?
DRSSTC is on my list next to build
I converted to 120V so I can use it elsewhere than my garage. I have a vid of me building it, but I doubt Ill ever do an actual build guide. sorry.
why you convert full brigde?
hey.i would like to know what diameter pvc you used for your primary coil.Aamzing video btw!
4 inch PVC pipe
When I have 240V sockets, I shouldn't have to convert them to 120V like you, right? And should I replace the primary capacitor with a 100nF one? And what about the IGBTs and rectifier, should I preemptively replace them even though the original ones are still fine?
Thank you for the answers!
You dont need to convert if your already on 240V. Switching out the capacitor isnt necessary either, but it helps reduce the coupling du to less turns on the primary. If you plan on changing your IGBTS, might as well give them hell while they are still functional ;)
@@lewisse5 thank you for answer!
Hello friend! I wish you success in your work and prosperity to your channel! Please tell me, what frequency was the secondary winding of your coil?
I bought the same board. And I want to wind a reel like yours. But I do not know what ideal frequency to make for this.
at 2:33 ,I measured 196KHz
@@lewisse5 Thank you friend. I wanted to leave a comment under the first video. But apparently the second video started and I left a comment under it. And then I saw the frequency on the generator. Did you make the secondary coil yourself? Or did you buy a ready-made one?
I bought this one
@@lewisse5 Where did you buy it? And how much did you pay?
What kind of wire do you use for the primary coil? 16AWG?
Yep, 16AWG stranded wire I had lying around.
what were the previous IGBTs?
I dont remember
Average* Aliexpress DRSSTC