@@ixography I haven't had a chance to test and so far I have never flown Walksnail but I have one of the way and I'm super excited. My O3 footage looks great in perfect lighting conditions, not su much when it's cloudy, so I'm looking forward to seeing how walksnail compares in bad lighting conditions.
First class video and thank you for your impressions. I use Dji and am very happy with it, but I am also very interested in other technologies or providers. Of course, it is always a big step to change an existing system. Best regards and have a nice flight 🫡
Thanks mate! Glad you liked it. I also have DJI and I like it but they both have their pros and cons. Walksnail however looks much nicer while flying in the goggles so for the best flying experience and quality it is better than DJI but only in 1080p ofcourse .
@@ixography Does that mean I have to record in 1080 to get the best image quality in the goggles? If that's the case, a GoPro or other additional camera would be a must, right?! Best regards
Excellent video! I should have watched it before buy it the go film 20 but now that I have and watch your video I guess was a nice purchase as my second drone. I just fly with it 2 times and as you I'ill only use it for more professional flying, nice to see some footages of the final result, looks Great 👍
@@ixography Thanks I just ordered mine. but I'm not too familiar with gopros, but the 3d printed mount only has 2 upward holder plate for the thumb screw connects to mount on the gopro... isn't it usually 3 at the bottom and 2 on the gopro to slide into each other? will this still work tight with 2 against 2?
@@HTWOFORLIFE well the ziptie should have been around the carbon so it would not rip off but I was a bit dumb and somehow I just put it under the tpu hahha
@@ixography I see! so it's to reinforce for holding gopro's weight, sounds like a good double check. At the same time I realized the 3D printed mount is only 2 upward thumb screw hole... will it be tight enough with against only 2 holes as well on the gopro mount?
Great video. I also notice the stuttering in my video, but I had the opposite experience... I thought I solved it by going from Auto shutter to manual... but, I only have a handful of flights with it, so more experimentation is needed. BTW, I just leave the firmware update cable plugged in all the time and it's no issue (mine is installed in a fixed wing though, so it's protected.)
Hmm yes it is weird as I had the feeling that one of my drones didn't have this issue and other had. And yes I had this also like this but then I thought I would lose it so I took it out of their and keep them at home in a jar on my desk so I do not lose them and always put them back right away as they are really small and can be lost easily . Glad you liked the video!
![☀ Взрывной двухдюймовый - а почему взрывной? [CADDXFPV Gofilm 20]](http://i.ytimg.com/vi/-E0dBDftY6s/mqdefault.jpg)
![☀ Взрывной двухдюймовый - а почему взрывной? [CADDXFPV Gofilm 20]](/img/tr.png)
I'm really impressed by the footage you were able to get with the moonlight system, nicely done! 🙌
Thanks man! Appreciate it! When I look back at it the quality is actually really good
@@ixography I haven't had a chance to test and so far I have never flown Walksnail but I have one of the way and I'm super excited. My O3 footage looks great in perfect lighting conditions, not su much when it's cloudy, so I'm looking forward to seeing how walksnail compares in bad lighting conditions.
@@colibrifpvyes walksnail is better in low light for sure but I hope they come with 10bit as it would be less limiting
First class video and thank you for your impressions. I use Dji and am very happy with it, but I am also very interested in other technologies or providers. Of course, it is always a big step to change an existing system. Best regards and have a nice flight 🫡
Thanks mate! Glad you liked it. I also have DJI and I like it but they both have their pros and cons. Walksnail however looks much nicer while flying in the goggles so for the best flying experience and quality it is better than DJI but only in 1080p ofcourse .
@@ixography Does that mean I have to record in 1080 to get the best image quality in the goggles? If that's the case, a GoPro or other additional camera would be a must, right?! Best regards
Iam not sure at all 😅 but I think you can record 4k in the vtx with micro sd .
Maybe he means 1080p flying because the Google screen is 1080p max 🙃
With the words 1080p of course.......he meant the Google is limited to few 1080p but you can record 4k in the vtx .
No need of gopro. 😀
@@MAYLOFPV_Drone... That would be exactly the same as with DJI. So no disadvantages in that regard.
Excellent video! I should have watched it before buy it the go film 20 but now that I have and watch your video I guess was a nice purchase as my second drone. I just fly with it 2 times and as you I'ill only use it for more professional flying, nice to see some footages of the final result, looks Great 👍
Yess it is an awesome little drone and when you use a gopro it gets even better
Great video!! decided to get it. Can you share where to get and mount the gopro mount on top? I see you removed the top camara cover
Thank you! Yes indeed someone shared it in the walksnail group so I used that 3D model
@@ixography Thanks I just ordered mine. but I'm not too familiar with gopros, but the 3d printed mount only has 2 upward holder plate for the thumb screw connects to mount on the gopro... isn't it usually 3 at the bottom and 2 on the gopro to slide into each other? will this still work tight with 2 against 2?
@@ixography I also see you have a zip tie on the mount as well? can I ask you what is the purpose of it?
@@HTWOFORLIFE well the ziptie should have been around the carbon so it would not rip off but I was a bit dumb and somehow I just put it under the tpu hahha
@@ixography I see! so it's to reinforce for holding gopro's weight, sounds like a good double check. At the same time I realized the 3D printed mount is only 2 upward thumb screw hole... will it be tight enough with against only 2 holes as well on the gopro mount?
Great video. I also notice the stuttering in my video, but I had the opposite experience... I thought I solved it by going from Auto shutter to manual... but, I only have a handful of flights with it, so more experimentation is needed. BTW, I just leave the firmware update cable plugged in all the time and it's no issue (mine is installed in a fixed wing though, so it's protected.)
Hmm yes it is weird as I had the feeling that one of my drones didn't have this issue and other had. And yes I had this also like this but then I thought I would lose it so I took it out of their and keep them at home in a jar on my desk so I do not lose them and always put them back right away as they are really small and can be lost easily . Glad you liked the video!
Plz tell me I have budget around 60k and I have anlog setup so what is best choice to upgrade into digital walksnail or buy a dji action 5?
Sorry mate 60k what?
@ixography budget
60k dollars?
How many cells is your 850 mah battery?
4S