Yes you are right. Obviously the exact measurement will be obtained (referring to 100 and 100 as in this case), only if the measurement of the piece allows it, but on the other hand, math is math.
Hi Rayhan, you have to select the 3D model, then create the wireframe in order to get the geometry/geometries and finally apply the machining using those geometries. Sooner or later I will make a video on that as well. Best regards
Hi, the software usually doesn't lock programs. Is there maybe a problem with the dongle? I would recommend to try closing the software and trying to pull the dongle out and put it back in, then reopen the software and probably will start working again.
Your videos saved me several times. Many thanky Alex :)
Hey this is very helpful I'm trying to learn b suit this has be super educational for I appreciate you taking the time.
thank you, very instructive and very well explained.
very good trianing course, thanks a lots
The was very helpful, thank you
Can you please show how to set b nest
how to make it run on two origins.. for example origin 5 and 8. please answer thank you
How do I turn the mouse tracking off? Anytime it’s on screen it draws or moves
Question. If i wanted to make the boring program show when lpx>500 and lpx
In your specific case you have to type in:
(lpx>500)*(lpx
@@freshzone thanks!
hello .. i have a question ... How do I use multiple boring program in one run?
Sorry... I didn't quite understand your question, could you be more specific?
Thank you
Não está correto os furos a 5mm, no painel de 1000mm fica 100mm ambos os lados, mas se mudar o tamanho do painel não fica com exatos 100 de cada lado
Yes you are right. Obviously the exact measurement will be obtained (referring to 100 and 100 as in this case), only if the measurement of the piece allows it, but on the other hand, math is math.
hola cómo puedo descargar bsolid en una laptop
how to drill from 3d solid CAD ty
Hi Rayhan,
you have to select the 3D model, then create the wireframe in order to get the geometry/geometries and finally apply the machining using those geometries.
Sooner or later I will make a video on that as well.
Best regards
Serface from sections Need help on how to make this video
Sir ji how to unlock any program
I am editing a program and it is not working and it is not getting deleted.
Hi,
the software usually doesn't lock programs. Is there maybe a problem with the dongle?
I would recommend to try closing the software and trying to pull the dongle out and put it back in, then reopen the software and probably will start working again.
@@freshzone thank you
Hablas Del Islam Como Se Fuese una religion unificada, es bien sabio que esta ramificada
I tried this in inches, and it it yid not work. Switched to mm and it works fine. Anyone know why? Alex
I'd like to ask some questions if is possible over Instagram
Hello how can i find you in Instagram?!