ZA-TS mounted spreader with WindControl | AMAZONE
Вставка
- Опубліковано 23 гру 2021
- The ZA-TS mounted spreader is available with a tank capacity ranging from 1,400 l to 4,200 l and is equipped with the new TS spreader unit. The TS spreader unit provides working widths of up to 54 m together with excellent border spread patterns, meaning that the ISOBUS spreader ZA-TS is one of the best high output spreaders.
The reliable weighing technology, the AutoTS and ClickTS precise border spreading systems as well as the innovative ArgusTwin and WindControl technology and a large number of other options put the fertiliser spreader in a class of its own.
The wind on your side
AMAZONE WindControl is now available independently of ArgusTwin.
The wind is always blowing somewhere in the world and this makes accurate mineral fertilisation a major challenge in agricultural practice. According to Prof. Dr. Karl Wild of the University of Applied Sciences, Dresden, the influence of wind on the spread pattern can also be constantly monitored and automatically compensated for by WindControl. WindControl can now also be specified for the ZA-TS mounted spreaders and ZG-TS trailed spreaders independent of the ArgusTwin spread fan monitoring system.
The challenge posed by the wind when spreading mineral fertiliser
Winds can be strong or light, blow from different directions or blow at a constant speed one moment and in gusts the next. As a result, the effect of the wind on the spread pattern never stays the same. The wind speed and the wind direction vary both within the tramline and in comparison to the adjacent tramline.
The wind is a parameter in fertiliser spreading which the operator cannot influence directly but they must always keep in mind. As a rule, the key period of use for a centrifugal broadcaster is during the main growing season in spring. At this time of year, the site-related probability of having to work in windy conditions is particularly high when viewed over the year as a whole.
Headwinds or tailwinds stretch or compress the distribution pattern. The lateral distribution is not affected in either case, so that the throwing distance and therefore the effective working width remain unchanged. On the other hand, crosswinds change the lateral distribution significantly. The distribution pattern is compressed on one side and stretched on the other, resulting in an asymmetrical spread pattern. So the task of WindControl is to permanently monitor the spread pattern and adjust the fertiliser spreader settings in such a way that a symmetrical spread pattern is restored.
Windless conditions "at the touch of a button" widens the application window
A high-frequency wind sensor, mounted on the fertiliser spreader, records both the wind speed and the wind direction and transmits this information to the job computer. This processes the data with the forward speed and calculates new settings for both the delivery system and the spreading disc speed, which are then automatically adjusted. In a cross wind, the disc speed is increased on the side into the wind and the delivery system is rotated outwards. At the same time, the disc speed is decreased on the side facing away from the wind and the delivery system is turned inwards. This automatically counteracts the wind effect and ensures an accurate distribution. In addition, the use of WindControl results in larger time windows for fertilisation.
An eye on the wind
In addition to all the important parameters for fertiliser spreading, the operator always has an overview of the current wind situation such as the wind direction, wind strength and gustiness in the work menu. Traffic light colours are used to indicate the extent to which WindControl is still able to compensate for the effect of the wind. The system also issues a warning message if the limit to the amount of control is reached when the wind is too strong or if the gusting is changing too frequently.
The mast holding the wind sensor is automatically extended when the spreading discs are actuated. In doing so, the sensor protrudes above the tractor cab so as not to measure any turbulence generated by the tractor. When the spreading discs are switched off, the wind sensor retracts to the protected position between the tractor and the spreader. Manual operation is also possible.
Perfect results in every situation
AMAZONE offers the ArgusTwin spread fan monitoring system for the ZA-TS and ZG-TS centrifugal broadcasters as an addition to WindControl.
___________________________________
► Don't miss any more news. Subscribe and click the 🔔 to be notified. Register here: ama.zone/ffdkoxs
___________________________________
💚 Website: www.amazone.de
🧡 Facebook: / amazone.group
💚 Instagram: / amazone_group
🧡 Twitter: / amazone - Наука та технологія
Frohe Weihnachten an das Amazone Team
Dankeschön, das wünschen wir dir auch :)
Viele Grüße vom AMAZONE-Team
@@amazonenwerke danke 😃
Super. So ein großes Feld möchte ich auch mal haben. Gr Hugo vom Bodensee.
Amazing Amazone 👍 Control important
Super présentation. Effectivement très bon produit a fait ses preuves l’an dernier. 👍👍👍👍
Ça fait cher le gadget quand même
Bonjour j'ai une question est ce que vous avez accès au menu de l'alignement de l'épandeur (0:19)
@@jeremie9670 oui un niveau à bulle s’affiche pour le mettre à niveau gauche droite et avant arrière.
@@jean-michelguthmann5693 tu trouves ça où j'y ai pas accès y a un truc a activer ?
@@jeremie9670 si tu as un amapad sur l’écran de l’épandeur tu appui sur la flèche rouge et ensuite sur réglage machine là où tu trouves l’argus twin et le wind Control. Tu défile ou page suivante tu as le niveau alignement dessiné. Et tu cliques dessus. Après tu peux normalement le faire afficher sur ton écran de l’épandeur en haut à gauche normalement. Paramètres de configuration je crois. Moi je ne l’ai pas sur l’écran de travail.
Bei statischem Wind funktioniert das bestimmt gut, aber der ist ja nicht dass Hauptproblem,
Windböen und dadurch unhomogene Überlappung werden die dadurch verhindert?
Grüße von der Ostalb
Hallo Jürgen, zum einen wird durch WindControl der Windeinfluss auf das Streubild permanent überwacht und kann automatisch ausgeglichen werden.
Ein an der Maschine montierter, hochfrequent messender Windsensor erfasst dabei die Windgeschwindigkeit und die Windrichtung. Anhand dieser Daten berechnet der Job-Rechner in Verbindung mit den Informationen von ArgusTwin neue Einstellwerte für das Einleitsystem und die Streuscheiben-Drehzahl.
Bezüglich Winböen: Der Sensor erfasst die Frequenz und Stärke der Windböen, sollte der Böenzähler einen Grenzwert überschreiten, spricht das System eine Warnung aus und empfiehlt dem Nutzer die Düngerapplikation einzustellen.
Viele Grüße vom AMAZONE-Team
when is new ZATS coming out with PriceControl? lol
Très bon semoir apparemment , oui "apparemment" puisqu'ils ne sont pas livrés faute de composants !! pareil pour les pulvés et autres .... Alors vu les perspectives d'avenir sur les engrais plus besoin de semoir et bientôt pareil pour les pulvés !!! deutch qualitat !!!sinon il y a d'autres marques ....
Quand tu voit le prix du déverrouillage pour avoir l amatwin (juste un partage d'écran amatron 4 avec ipad)sa te passe l'envi
Tu me donne le prix d'un iPad ?
Quelle est le lien avec ta réponse ?
@@matmax83 le prix non?
Tu doit être assez grand pour regarder sur internet le tarif
@@matmax83 ah tu comprends pas le sarcasme? Merde
Hier wird das perfekte Beispiel gezeigt, warum man Dünger nicht mit einer schnecke befördern sollte. 😅
WA