fiat 1,4 12v immo off Motronic
Вставка
- Опубліковано 21 кві 2021
- this is a tutorial on how to remove immobiliser in a Bosch Motronic From a Fiat Bravo 1.4 12v engine
i can share the file i used just ask for it in the comments and i will post it
here is the file i used and it works great
mega.nz/file/jP40iBxI#fQc34gj...
thanks for watching
pkease dont forget to subscribe and like - Авто та транспорт
thanks for this videos Is there a way to remove the eeprom chip from ecu to make plug & play by make Bridge؟
thanks for watching
i dont know about a bridge... but if you make it immo off it will be plug and play.
good luck
Hello sir, this immo file work on all cars with that ecu? Thanks
Thanks for watching.
Yes this is to immo off these ecus on any car that uses these..
Thank you sir, wish you good life
this immo work for 3 days only any help pls
thanks for watching
did you cut pin 6 ( immo line)?
No but i unplug cable from immobilizer box
@@ahmedamer2009 ok
I think that is ok....
Are you sure the problem is the immo again?
@@PSICompanyPerformanceyes immo again
@@PSICompanyPerformanceAfter running the car, it has gas for three days