Can we get a reboot? An can I suggest: 1. A daggerboard for stability . 2. Can we go all Tim Allen on the suction pump and give it MORE POWER!??? 3. A single arm at the nose so it can pivot off walls. Basically, think boat! Great vid, thanks! 👍
i did that too, but instead of a roomba i used a arduino robot car set with ultrasound sensor to detet walls. 3d printed the housing, made it float on 4 1.5 l Pet bottles (2 on each side) and added a solar panel and a battery. actually had 3 broken roombas ins some box, but didnt think of using them for that :) I faced the same issue with the debris being pushed away instead of going into the net. Kind of solved that issue by switching from paddle wheels to a RC boat Jet motor installed behind the net and controlled it with a stepper motor that turned left or right once the sensor detected an wall. But it resulted in a new issue.. the boat kept on driving in circles, matter how many times i adjusted the angle of the motor. And then there was the problem of the 3d printed parts slowly warping over time. so gave it up at some point.
@@electrosync true.. also tried PETG and a PLA -ABS blend material, but didnt solve the problem. at the moment im still seaching for some way to coat 3d prints in something that makes usable outdoors.. there must be something.
Hmmm, maybe a hundred bucks on top of the cost of the cheap Roomba knock off. Filament, a few electronic bits, fasteners and materials. It did take some time though!
In order : Know Myself - Patrick Patrikios Burlesque Heartache - RKVC Find Your Way Beat - Nana Kwabena Smoke - Silent Partner all via YoutTube Audio Library
In order : Know Myself - Patrick Patrikios Burlesque Heartache - RKVC Find Your Way Beat - Nana Kwabena Smoke - Silent Partner all via YoutTube Audio Library
I'd like to apologise for the poor acting at the start of the video. I won't be using their services again...
I thought it was cool
@@oscarhansen7957 Please accept my apology again!
No it is ok it's like Integza
Where can I buy
I know where there’s a second hand one going cheap...
This channel is underrated
Yep
I actually believed that this channel had millions of subscriber due to the super great quality, subscription definitely earned! Super underrated.
Can we get a reboot? An can I suggest:
1. A daggerboard for stability .
2. Can we go all Tim Allen on the suction pump and give it MORE POWER!???
3. A single arm at the nose so it can pivot off walls. Basically, think boat!
Great vid, thanks! 👍
What a project idea! Love the pool noodle as well
Fun time. You should do a lawnmower conversation.
Now that’s something that would be useful!
AWESOME VIDEO
Thanks! I’m glad you enjoyed it!
Nice vid
Amazing
I love that roomba!😊
i did that too, but instead of a roomba i used a arduino robot car set with ultrasound sensor to detet walls. 3d printed the housing, made it float on 4 1.5 l Pet bottles (2 on each side) and added a solar panel and a battery. actually had 3 broken roombas ins some box, but didnt think of using them for that :)
I faced the same issue with the debris being pushed away instead of going into the net. Kind of solved that issue by switching from paddle wheels to a RC boat Jet motor installed behind the net and controlled it with a stepper motor that turned left or right once the sensor detected an wall. But it resulted in a new issue.. the boat kept on driving in circles, matter how many times i adjusted the angle of the motor. And then there was the problem of the 3d printed parts slowly warping over time. so gave it up at some point.
A jet boat sounds so much more fun! I agree that 3D printed pool accessories are probably not a long term solution!
@@electrosync true.. also tried PETG and a PLA -ABS blend material, but didnt solve the problem. at the moment im still seaching for some way to coat 3d prints in something that makes usable outdoors.. there must be something.
Nice idea. But that ain't no Roomba. That is just a vacuumrobot.
4:35 Fish have that same problem when eating. They've developed various behaviours to get around it.
great video 🔥
Zima Blue!
“Just because it came from the heart, didn’t make it good”.
maybe just have the bot move a little slower to give it more to suck the water in.
How much did this cost
Hmmm, maybe a hundred bucks on top of the cost of the cheap Roomba knock off. Filament, a few electronic bits, fasteners and materials. It did take some time though!
when you tipped in the foam balls I literally gasped 🤣 then laughed
Would be nice to build one that cleans the bottom
Top idea! That would be a challenging project.
What is this music.
In order :
Know Myself - Patrick Patrikios
Burlesque Heartache - RKVC
Find Your Way Beat - Nana Kwabena
Smoke - Silent Partner
all via YoutTube Audio Library
@@electrosync cheers.
The roomba can clean the water but cant clean the floor under water
Also u dont nead a roomba
Just use water
Also fun fact, on the ones that have a tarp liner, you can shuffle in socks to clean the stubborn gunk if your brush isn’t getting it up.
You should make it faster
zima blue lol
Mrbeast put you on his video!
Oh, sheet! Thanks for the heads up!
ITS A POOLBA
Bruh, you just stole this from Mark Rober
Why is the music so dang loud, it's rather distracting for the music to jump from 600% to 50% every 5 seconds.
What is this music.
In order :
Know Myself - Patrick Patrikios
Burlesque Heartache - RKVC
Find Your Way Beat - Nana Kwabena
Smoke - Silent Partner
all via YoutTube Audio Library