Hello, I have decent knowledge of glasses for the most part, however I have many acetate glasses laying around, that could be re-used. What material do you use for polishing and restoring shine? I can polish but that leaves cloudy, white tracks.
Do you know how some manufacturers place a (metal?) core wire inside the legs of the frames to add further support? I've searched to no avail. I suppose this is something very hard to do manually.
I know next to nothing about making frames but I suppose they sandwich sheets of acetate around the metal core and it's all bonded together with acetone, heat and pressure.
If its cheap frame made by injection plastic the process is simple. place metal part into the tool/mould, press green button and molten plastic will fill the cavity of the tool/mold.
Am I correct in my understanding that a metal core is placed inside the temple? I split the plastic plates of the glasses and put the metal inside, then applied a solvent and glued it together using an electric hot press.
Thank you for your comment. First of all, you need to understand the entire process of making glasses and be able to use files and buffs well. I think it will take a few years before you can use each tool one by one, but if you learn them while making them, you will gradually be able to make beautiful glasses.I think you can learn just the process of making glasses in two weeks, but I tell my students that it takes at least five years to become a full-fledged craftsman.
how do you even get started in a business like this , i've been an optisian for the past 6 years but i am interested in making glasses , beautiful video
Thank you for your comment. When I first started making handmade glasses in earnest, I apprenticed under a master and trained for one week, then received homework for the rest of the month. After that, I trained for 10 months, living in for one week and doing homework for one month.After that, my master retired, so I was introduced to his brother disciples, and I continued to train and manufacture glasses. It took about 5 years to get things going smoothly, but now we manufacture everything in-house except for the plastic plates, hinges, screws, and metal parts.
Thanks for your comment. When polishing, I use wet mud for large scratches. The name is Boshu powder. The finishing compound used is the finest mirror finish sold in Japan.
@@EyewearCraftsmanJapan if you started a brand here in Egypt it will be so successful..we can collaborate in that ..the Japanese work has alot of respect here
Great work!! I was scouring the internet for that same tool!!! It looks adjustable in the video for frame thickness. Do you happen to know the specific name of the maker of said tool? Thanks. Great video!!!!
Thank you for your comment! I bought nose pad japan factory and glue "Acetone70% , Methanol 20%, Methyl acetate10%" using a mixture of three solutions. Thanks
Thank you for your comment. The material of the glasses made in the video is celluloid, and even if there is no core inside the temples, there is no problem because the material is strong. It is said to be a material similar to buffalo horn.
Thank you for your reply. Is it celluloid or cellulose acetate? Because looking at the video it looks as malleable as acetate, but maybe even celluloid is so malleable?
This is made of celluloid. If you use acetate, you will need to insert a core wire because it is a soft fabric, but if you use celluloid material, there will be no problem.Celluloid is also a flexible material that is easy to process and adjust.
Thanks for your comment. I started cutting by hand using an NC machine about three years ago. The manufacturing method introduced in the video is a traditional manufacturing method that has been passed down since ancient times.
@@EyewearCraftsmanJapan i dont know if you would believe me but its my dream jop iam ready to spend thr rest of my life doing this eager to learn it im trying to do it its abit difficult right now but its in my blood i know it god pless you man
I use a variety of solvents, but the one I mainly use is called Funere. I use a solvent called Funer. A mixed solvent of methyl acetate, acetone, and methanol.If each solvent is available, methyl acetate should be 20-30%, acetone 70-80%, and methanol 5-10%.
Thanks for your comment. Currently, we only have teaching materials in Japanese, and we are not yet ready to provide them in English or other original languages.
Hello, I have decent knowledge of glasses for the most part, however I have many acetate glasses laying around, that could be re-used. What material do you use for polishing and restoring shine? I can polish but that leaves cloudy, white tracks.
Do you know how some manufacturers place a (metal?) core wire inside the legs of the frames to add further support? I've searched to no avail. I suppose this is something very hard to do manually.
I know next to nothing about making frames but I suppose they sandwich sheets of acetate around the metal core and it's all bonded together with acetone, heat and pressure.
If its cheap frame made by injection plastic the process is simple. place metal part into the tool/mould, press green button and molten plastic will fill the cavity of the tool/mold.
Am I correct in my understanding that a metal core is placed inside the temple? I split the plastic plates of the glasses and put the metal inside, then applied a solvent and glued it together using an electric hot press.
As you say. I also make temples using this method.
How long would a class to learn this process take 2 weeks or two months ? I would take the trip to Japan to learn
Thank you for your comment. First of all, you need to understand the entire process of making glasses and be able to use files and buffs well. I think it will take a few years before you can use each tool one by one, but if you learn them while making them, you will gradually be able to make beautiful glasses.I think you can learn just the process of making glasses in two weeks, but I tell my students that it takes at least five years to become a full-fledged craftsman.
Great video!
Thank you very much😄
Best valo shikthe parchi aapnake shubecha janai
先生、こんにちは、私はちょうど手作業の眼鏡に接触して、あなたに1つの問題を教えて、ヒンジが杭の頭の上に埋め込む時、一部の材料を押し出して、私が押し出しられたこの部分の材料を取り除く時、醜い痕跡を残して、何か良い方法がありますか?
こんにちは。
眼鏡の蝶番を埋め込む際は、埋め込む部分の容積を計算し先に穴を開けます。
私が使っているのは日本製のベーシックな蝶番で3mmのエンドミルで深さ3.1mm掘っています。
こそに蝶番を埋め込めば、押し上げられた生地が出てくる事は殆どないと思います。
how do you even get started in a business like this , i've been an optisian for the past 6 years but i am interested in making glasses , beautiful video
Thank you for your comment. When I first started making handmade glasses in earnest, I apprenticed under a master and trained for one week, then received homework for the rest of the month. After that, I trained for 10 months, living in for one week and doing homework for one month.After that, my master retired, so I was introduced to his brother disciples, and I continued to train and manufacture glasses. It took about 5 years to get things going smoothly, but now we manufacture everything in-house except for the plastic plates, hinges, screws, and metal parts.
@@EyewearCraftsmanJapan, hi dear pls share your contact details
what thickness is the acetate plate you use?
Really i am very imprase that your hand made eye wear which tou make.
Thanks for your comment. I'm honored that you are interested.
What sand grit used for scratches and finishing? And rubbing compound for tortoise acetate
Thanks for your comment. When polishing, I use wet mud for large scratches. The name is Boshu powder. The finishing compound used is the finest mirror finish sold in Japan.
What is the tools that used for revite to cut the pins which hold the hinge please
Thanks for your comment. I have a thread cutting tool, so I cut the rivets with it.
Do you do work for other countries?...your work is great
Thank you for your comment!
I am teaching in Japan now, but in the future I would like to create a place to teach technology in the United States.
@@EyewearCraftsmanJapan if you started a brand here in Egypt it will be so successful..we can collaborate in that ..the Japanese work has alot of respect here
Thank you for your comment.
I work in Fukuoka Japan.
beautiful! what tool do you use for the internal cut of the frame? to fit the lenses. your work us awesome !
Thank you for your comment!
First, chamfer the lens part. Next, use a special blade to dig a groove in the lens.
Thanks
Great work!! I was scouring the internet for that same tool!!! It looks adjustable in the video for frame thickness. Do you happen to know the specific name of the maker of said tool? Thanks. Great video!!!!
@@EyewearCraftsmanJapan Did you know the name of this special tool? where we can find it? thank you! This video inspires me!
貴重な動画とても勉強になり何度も見返してます。質問ですがシューティングの機械がない場合他にどのような方法で芯をテンプルに入れれますか?私は垂直に細い穴を空けて柔らかくし、入れる方法を考えました。
ご教授よろしくお願いいたします。
動画視聴ございます!シューティングの機会はかなり大きなものになるので、私は導入していません。現在芯貼りと呼ばれる方法でテンプルの中に芯を入れています。4mm生地を短冊状にカットし、横から刃物で半分に割ります。昔ながらの製法です。
Thank you for the video. I am making a frame but where can I get the acetate nose pads you glue on? Many thanks
Thank you for your comment!
I bought nose pad japan factory and glue "Acetone70% , Methanol 20%, Methyl acetate10%" using a mixture of three solutions.
Thanks
Beautiful! No wire in the temples?
Thank you for your comment. The material of the glasses made in the video is celluloid, and even if there is no core inside the temples, there is no problem because the material is strong. It is said to be a material similar to buffalo horn.
Thank you for your reply. Is it celluloid or cellulose acetate? Because looking at the video it looks as malleable as acetate, but maybe even celluloid is so malleable?
This is made of celluloid. If you use acetate, you will need to insert a core wire because it is a soft fabric, but if you use celluloid material, there will be no problem.Celluloid is also a flexible material that is easy to process and adjust.
why don't you use a CNC machine?
Thanks for your comment. I started cutting by hand using an NC machine about three years ago. The manufacturing method introduced in the video is a traditional manufacturing method that has been passed down since ancient times.
Wow, thanks for sharing ❤
Thank you very much for your comment.
镜腿金属怎么放进去的?
是你刮的那個文件嗎?文件由日本傳統工匠手工製作。現在文件工匠退休了,我拿不到。
7:25 what is the tool name please which is used for finishing the revit pins ??
The product name is written as Nietkopfmacher. and Flearning punch. That's a unique name. The company is listed as B&S quality made.No,212504.
Is there no iron in your arms?
Celluloid glasses do not require metal cores in the temples. For items that are too thin, a metal core may be inserted.
@@EyewearCraftsmanJapan is acetate the same? Would you need to use a metal core with acetate?
you are gifted god pless you
Thank you for your comment. I believe this is the result of years of training.
@@EyewearCraftsmanJapan i dont know if you would believe me but its my dream jop iam ready to spend thr rest of my life doing this eager to learn it im trying to do it its abit difficult right now but its in my blood i know it god pless you man
Could you please tell me which glue you are using for nose support?
He's probably just using acetone as that turns acetate into an adhesive. At least that's the traditional method.
I use a variety of solvents, but the one I mainly use is called Funere. I use a solvent called Funer. A mixed solvent of methyl acetate, acetone, and methanol.If each solvent is available, methyl acetate should be 20-30%, acetone 70-80%, and methanol 5-10%.
What is the name of the knife at 0:45?
We call "KISAGE" which this tool is made of steel and uses a knife to smooth out rough surfaces.
Wat material do you use to make eyeglasses
Cellulose acetate.
Thanks for your comment. I mainly use celluloid. I also use acetate and buffalo horn.
Hi, Could you please guide me as to how to learn the art of spectacle making or whom to contact? Maybe an email or number
Thanks for your comment. Currently, we only have teaching materials in Japanese, and we are not yet ready to provide them in English or other original languages.
Hi,
Could you please tell me which glue you are using for nose support?
Typically they use acetone to melt the plastic for bonding
Thanks for your comment. I use a solvent called Funer. A mixed solvent of methyl acetate, acetone, and methanol.
Hi, what is the name of the tool you use at 1:05 please?
Thanks for your comment. This tool is also sold by a company called B&S quality made.
@@EyewearCraftsmanJapan Thank you for sharing! I am a beginner of handmade frame in Taiwan. Inspiring video, thanks again!