Hello, I figured out that you have to click on fixed part in assembly and select float to have bolt go in and out. How can I choose to put a thread on a 8" boat shaft end for propeller nut? How do you choose a different size other than what is offered in selection?
Hi, there is a way to automatize the NPT or BSPP thread like holes wizard or could be posible create a library that form the thread on a conical part? Many thanks
So you drew the nut and bolt, but it would have been nice if you would have explained how to avoid making your nut to big or to small for the the bolt if you didn't want to follow the dims you were using. I'm new to this and I have to make a specialized nut for a 5/8 bolt, so how do I insure that my nut will be the correct size for my bolt? Now that's what I need to learn.
Hello, excellent video. I recreated the bolt and nut in Solidworks and they looks great. I then used the Interference Detection and Solidworks found interference between the bolt and t-nut. I did this after I 3D printed both parts on a Dremel 3D45 and of course they don't screw together. The Dremel probably doesn't have the highest precision for the job but I would have thought the alignment would have been better but the interference was 72.44mm^3. Not sure if the interference is cause by the machine mate between the parts and the surfaces I selected but the D printed part don't seem to work. Not sure why ...
you should make t-nut and the screw same pitch, i have used here arbitrarily dimensions and that is the reason for this problem, make them both 1.75, hole for the t-nut 10.2
Thanks. I have a question. I’m making a threaded hole from scratch. What would be the hole diameter. Would it be the major diameter or minor dimeter. Say I want a 1”-12. What would be my initial hole size? Thanks in advance
You looked used to Solidworks... I'm using Solidworks 2020 but I'm having trouble with the inner thread. I used hole wizard to make the hole but the thread doesn't appear during assembly like my lecturer did. Do I have to make the thread manually or change some options in the wizard hole? I tried : 1.Hole Type = Hole 2.Hole Type = Straight Tap Standard = ANSI METRIC Standard = ANSI METRIC Type = Tap drills Type = Tapped Hole Size = M6x1.0 Size = M6x1.0 Blind Hole Depth = 10mm Blind Hole Depth = 10mm Thread Depth = 12mm Both of these don't work... or rather none of the hole wizards have pre-built inner thread during assembly
Hi you can check if your Cosmetic Threads are unable. You have one option that is called Annotations and you can find it Future Design Tree, click right click, and enable Cosmetic thread and Shaded cosmetic threads.
dimensions for this video are taken arbitrarily. but for example: hole size for M12 is 10.5mm and M12 screw is Ø12mm and M12 standard Pitch is 1.5mm for M8 hole size is 6.75mm screw is Ø8mm and Pitch is 1.25mm. international.optimas.com/technical-resources/tapping-sizes/
ok cool I think you just helped me figure out how to make thee thread go all the way through. I was having issues with it starting properly.
Great video! Thanks for the tutorial!
Glad it was helpful!
Hello, I figured out that you have to click on fixed part in assembly and select float to have bolt go in and out. How can I choose to put a thread on a 8" boat shaft end for propeller nut? How do you choose a different size other than what is offered in selection?
Hi, there is a way to automatize the NPT or BSPP thread like holes wizard or could be posible create a library that form the thread on a conical part?
Many thanks
So you drew the nut and bolt, but it would have been nice if you would have explained how to avoid making your nut to big or to small for the the bolt if you didn't want to follow the dims you were using. I'm new to this and I have to make a specialized nut for a 5/8 bolt, so how do I insure that my nut will be the correct size for my bolt? Now that's what I need to learn.
in thread future command is specification part, where you can choose what kind of thread u need :)
Hello, excellent video. I recreated the bolt and nut in Solidworks and they looks great. I then used the Interference Detection and Solidworks found interference between the bolt and t-nut. I did this after I 3D printed both parts on a Dremel 3D45 and of course they don't screw together. The Dremel probably doesn't have the highest precision for the job but I would have thought the alignment would have been better but the interference was 72.44mm^3. Not sure if the interference is cause by the machine mate between the parts and the surfaces I selected but the D printed part don't seem to work. Not sure why ...
you should make t-nut and the screw same pitch, i have used here arbitrarily dimensions and that is the reason for this problem, make them both 1.75, hole for the t-nut 10.2
Thanks. I have a question. I’m making a threaded hole from scratch. What would be the hole diameter. Would it be the major diameter or minor dimeter. Say I want a 1”-12. What would be my initial hole size? Thanks in advance
Cool info, well done, thanks for sharing :)
Glad it was helpful!
Thanku sir. ♥information
thanks for watching!
Hi when I want to use thread solid stopped and I have to close solid what should I do ?
hello, may i ask what is the difference of metric tap and metric die. thanks in advance
Metric tap cuts into the hole.
Metric die adds the thread to the hole surface.
@@JA-ur8ob thank you very much for the info
You the og goat of solidworks tutorials . 🎉🎉🎉🎉🎉🎉
I appreciate that!
Thanks for share. 😀
Thanks for watching!
You looked used to Solidworks... I'm using Solidworks 2020 but I'm having trouble with the inner thread. I used hole wizard to make the hole but the thread doesn't appear during assembly like my lecturer did. Do I have to make the thread manually or change some options in the wizard hole?
I tried :
1.Hole Type = Hole 2.Hole Type = Straight Tap
Standard = ANSI METRIC Standard = ANSI METRIC
Type = Tap drills Type = Tapped Hole
Size = M6x1.0 Size = M6x1.0
Blind Hole Depth = 10mm Blind Hole Depth = 10mm
Thread Depth = 12mm
Both of these don't work... or rather none of the hole wizards have pre-built inner thread during assembly
Hi
you can check if your Cosmetic Threads are unable.
You have one option that is called Annotations and you can find it Future Design Tree, click right click, and enable Cosmetic thread and Shaded cosmetic threads.
Why should the hole be 10.9mm before making the thread? Is there a rule or something?
dimensions for this video are taken arbitrarily.
but for example: hole size for M12 is 10.5mm and M12 screw is Ø12mm and M12 standard Pitch is 1.5mm
for M8 hole size is 6.75mm screw is Ø8mm and Pitch is 1.25mm.
international.optimas.com/technical-resources/tapping-sizes/
@@solidworks.tutorial Thank you for the explanation!
how about solidworks 2013? What command that can be use to make T-nut? answer me pls thx
same as this video, but in 2013 you have not thread futures :(
thread futures comes after 2016
Sir where are yu frome?
✌🏻
👍
karaan
saba los