N13 Pulsar Hardline Fuel system

Hey Everyone,
This week we have been focusing on the Fuel system. As usual we have poured over the Raceworks catalogue and have picked out a bunch of bits and pieces to put this system together. We got asked on our Facebook Page ( WingItGarage ) about what tools we used to do the hardline.
So, tools wise we have used the Raceworks Brake Flaring tool RWT-023, the 37 Degree dies RWT-033 for the proper AN Flare angle and finally RWT-044 the tube straightener. For bending we have done this manually just forming around pipes and by hand but there are some good bending tools you can buy from plumbing stores for 1/2" and 3/8" such as the Ridgid 300 or 600 series benders that we will hopefully invest in down the track.
Now if you don't want to go down the path of buying the flare tool then you can opt for the 600 series fittings that include a brass olive to seal down onto the Aluminum tube instead of using the Tube nuts and Tube Sleeve that we have used in our install.
Flare tool - raceworks.com.au/tools/brake-...
Tube Straightener - raceworks.com.au/tools/tube-s...
600 Series Hose ends - raceworks.com.au/fittings/hos...

[@davemac7270]

Great video! When I did some -8 hard lines I bought a cheap ebay 1/2" tube bender and it worked really well, although your hand forming got it done very neatly.
Keep up the great work.

[@wdrfilms375]

Did good with the time lapse