$100 Part Failure Cost $1800 To Fix On a Rare Toyota Truck!
Вставка
- Опубліковано 16 лют 2024
- A Toyota specialist shares a simple $100 bearing failure that cost $1800 to repair due to it's location on this super rare Manual transmission Toyota FJ Cruiser
TCCN Automotive Inc.
Toyota and Lexus Specialist Repair
Visit www.tccnautomotive.com to schedule your appointment today.
Check out the second channel :
/ @thecarcarenutreviews
Recommended Tools:
Basic Scan Tool amzn.to/3Jm6aom
Very good DIY Scan Tool amzn.to/3zF7dvH
Advanced Scan tool amzn.to/3q3L3QQ
Spill Free Coolant Replacement Funnel amzn.to/3uJfKxm
Sun roof drain cleaning tool amzn.to/3GMDlQ9
Good DIY Torque Wrench 1/2" amzn.to/3gE9bnw
Wireless Apple CarPlay for Toyota\Lexus amzn.to/3uKElSo
Very Good Triple Camera Borescope amzn.to/3MrgFs0
*as an Amazon associate, I earn from qualifying purchases.
Follow the channel on Social Media :
/ thecarcarenut
/ thecarcarenut
Check out the channel Merch store
/ @thecarcarenut
Make a one time donation to the channel:
www.paypal.me/CCNdonate
Check out the amazon store:
www.amazon.com/shop/thecarcarenut
*as an Amazon associate, I earn from qualifying purchases.
#thecarcarenut #tccnautomotive #carrepair #fjcruiser - Авто та транспорт
“Then this glass opens for you not to be able to reach anything”. Love your videos and you always make me laugh.
Good one! I liked the way AMD said this, but then forgot it. This time, I got a good chuckle out of it.
I've done a lot of mechanical work in my younger days, because We as youngsters We didn't have the scratch to Put it into the shop...So we Muddled through and learned as Went a long...
Great Video by the way..
Thx for sharing!
Drivers who habitually rested their foot on the clutch were doomed to replace throwout bearings with a clockwork regularity.
Yup, I was going to say, 90% chance owner was either a clutch rider or someone who engaged or disengaged clutch while not letting off throttle 1st.
I use to do this all the time and only a few years ago learned it was an issue. I've been lucky that I am at 250k Km on my car on the original clutch (2005 Toyota Matrix) but I am very careful to not do it now. Will need a clutch at some point though.
Yes. On my '97 4 Runner I have a manual transmission. I was able to reach 300k miles before I had the clutch replaced. It still had some life left on the clutch. But I was taking off for Arizona and Utah for a camping trip. I gave it some thought and decided to have a clutch job done before my trip.
They must be the same one's, that when they changed to auto transmission, always keep their left foot rested on the brake peddle, with the brake lights always on...
I was lucky to find a very nice '98 4Runner 4x4 with a 5-speed and a rear diff lock. I've been driving manuals since 1978 and just love them. Speaking of riding the clutch pedal, my cousin, whom I love very much, did that. I didn't say anything, though.
I have a 2014 FJ TT with a manual transmission, I'm the second owner. First clutch recently done, at 177K miles. Love the car, hope to keep it until the wheels fall off.
Same here 2012 manual FJ (not TT) bought it from first (German) owner. At 130k miles I did a clutch replacement, it wasn't worn out badly. Frame was showing very minor rusting, so when it was at 150k miles I had it cleaned and coated against rust. I love this car with all it's perks and oddities. I got used to the rear visibility issues quite fast. I don't really get how is that the windshield wipers are not working??? Mine are working perfectly, cleaning / wiping off the mess from the windshield. The idea is the same with me, too, drive it until the wheels fall off. But I reckon these strict EU regulations will come up with some stupid restrictions of old school cars 😒in a few years. If that happens before the wheels fall off, then it will be driven only offroad. 🤣
it'll out last you.
I have the 2012 edition TT red, hope too to keep it until the wheels fall off.😅
Thanks AMD! Here in Australia I taught both my daughters how to drive manual and each of them owns and drives a manual car. It’s like a superpower these days! Their 18 year old male friends who can only drive autos are in awe of my girls!
Your girls will never get married, will scare off the ' auto ' men😅.
@@phillipbanes5484Sounds like something a auto driver would say 💀
@@phillipbanes5484”A car with an automatic transmission is less likely to get into an accident”💀💀
My daughter who is now 36 learned to drive my 93 Toyota Pickup with manual transmission by just observing me drive it. One day when she was 11 years old she asked me if she could drive the truck on a dry lake bed where we were camping. I handed her the keys and off she went.
lol ya ok. Auto ppl have their hands free & use them to eat, text etc. @@phillipbanes5484
I have an automatic, with exactly the same color, still under 70K, with undercoating checked every year. Mostly summer car. When I get behind the steering wheel, I feel like a 26 years old. No other car gives me that level of happiness. Long live the FJ !
AMD, Congratulations to the FJ's owner for their choice of a manual. I believe the FJ manual offered full time 4WD like a Land Cruiser or Lexus GX. Let's hope a manual 4Runner or Land Cruiser FJ is coming soon. 🤞🤞
If it did come soon, it would not be the same As these last generation or two trucks, it would be all needlessly complicated and hybrid Of course.
they’ll never make another cheap manual stock truck or forerunner That is gas.
They only want to sell the new tundra they ruined for 60 grand, and these new hybrid Tacoma’s, that nobody might end up wanting anyway after a while
I doubt it.
Toyota will do that right after they do a solid front axle and a diesel engine.
Man I would love to own one
Will never happen, unfortunately. Unfortunately, that 6spd is kinda annoying to drive. That reverse gear spring breaks in quick and too easy to throw into R when leaving a stop light
Just purchased a 2024 4Runner. What a gem, bonus it's made in Japan
Cong.What's model and the price tag please ? Hard to find any in Canada.
@@Misiracaltudamecekas-qw8xo It seems like many dealers have finally got some shipments of 4 Runners again. They were getting kind of scarce.
All 4Runners are made in Japan
@Misiracaltudamecekas-qw8xo I got a sr5 premium. Gave 46 for it, as far as I'm concerned it's worth every penny. Sorry bout the long response time, phone issues. Cheers
@@Outdoorsy368 Thanks Sir,Very nice way to enjoy adventure of another 500K headache free
Another good one was the headlight leveling sensor in my 05 Prius. The part was around $50, but requires the removal of the whole front end of the car for access.
I appreciate your videos. I'm sold on Toyota for many many years. I am from Florida and that rust scares me a lot.
I watch this channel a lot and every time I hear the rust topic. I advocate for the use of fluid film even if you already have artificial rust on the service fluid film will stop the rust from getting worse. comes in spray cans. it will have a strong smell inside the vehicle for about a week or so. but it will go away. I live in a snowy area where I drive on salty roads during winter going daily to work. my car turns literally white and the body service feels ruff like sandpaper from salt accumulation. The fluid film keeps my Vehicle rust-free. you should try it.
Try being from Florida and now in Indiana lol
@@chrisragone8785 yes that would be an adjustment trying to do a basic auto repair and being met with that sort of rust.
Buffalo NY: hold my beer.
Always talking about rust but any vehicle can have same issue in rust belt my Chevy knows it!
Just a big thanks to you and your camera man. Fantastic car presentations.
I love my 2007 FJ. I was looking for a manual, but I actually off-road it, and the automatic is great for off-road, very stout. She’s a baby at 142,000 miles, and is stored in a garage and California owned. I use it for long off-road adventures, snow passes and desert running. My family has prohibited me from ever selling it, so it will become an heirloom vehicle for my sons. Frame has very little rust.
I daily drive a 2014 FJ. It’s got 168,000 miles and still runs and drives like a new truck. I love it.
How much rust?
2012 150k, offroading in Moab last year, this year going to Alaska, try that with 100k+ domestic truck@@obsoletecd-rom
But its not a 'truck'. Toyota doesn't build trucks.
Lexus @@lexusguy9127
@@lexusguy9127??
I had to replace the clutch and throwout bearing on mine at 180,000 miles. I bought it new and still love and drive the FJ daily.
Mr. Ahmed - thanks to you and your TOYOTA NUTS TEAM for one very special video ..!!
That FJ Cruiser looks so great in that Color …. Hat in back seat goes so well with this truck ! Some work on surface rust and quality protective coating and this great vehicle will outlast most other vehicles of the same period …. And THAT FOLKS is just how it is ..
Wish Toyota did better job on their rust protection…but again they already know that and still their products are the best in the industry….
Hats off to the owner of this beautiful beast , i’m sure that’s not his first Toyota rodeo .
God bless to all !!
I drove a ‘70 FJ 40 for 10 years from ‘79 till ‘89. The throw out bearing was the bane of my existence when it went bad.
Now after 14 years in our ‘10FJ,
Never had to replace windshield, wipers work great, more power than the FJ40, EVERYTHING is smoother, no leaks, and the visibility issues never bothered me. Great vehicle on and off road.
I looked at these when they first hit the dealerships. I couldn't get used to the feeling I was looking out the front viewport of a military tank. I ended up getting a new 2005 Tundra Step Side Limited. I still have that truck and use it for my daily driver. It rolled over to 220K miles this week. I bought my first car in 1967. My Tundra is the best vehicle I have owned.
My hardest clutch job ever, was on my base, '96 Tacoma a few years ago - not because of rust & broken hardware, but because the crossmember holding the tranny-mount is welded to the frame, and required all sorts of tricky maneuvers to wrestle the gearbox out of my truck. Wrestling it back in while fighting gravity was even more fun - especially having to do it in my driveway, with the truck on ramps!
Whole job took me nearly a week. After I finished, I looked up a Toyota FSM online. It said to first remove the engine! Glad I checked UA-cam, and my Haynes manual first!
@@efil4kizum Yeah. Crank windows, no AC. It did come with fancy stainless-steel wheel-covers, though.. Now upgraded with a fiberglass cap & 'factory' AC!
It’s a good thing the new owner has you as his mechanic, and hopefully plenty of money to take care of this vehicle 😂. That’s an expensive throw out bearing replacement.
50 years ago my first truck when I was 16 was a 1953 F-100. I was not easy driving that poor truck. I got to where I could replace that bearing in 30 minutes 😂. But that truck had not near the rust on anything. And it was in PA. They made them better back then I guess as far as metal used.
Was it a 3 on the tree?
Had lots of nickel in the steel back then.
@@bah5310 yes it was. And a V-8 flathead.
"If you're gonna own one of these, just get used to not seeing very well" 🤣
I’ve got a Voodoo Blue 2007 with 60K miles on it. I love it. No technology in it. Runs like new.
Bought my FJ on July 4th 2011 and it looks better than this one, underneath is spotless as well. Only had one windshield replaced in almost 13 years, wipers work great - the suicide doors were GREAT when we had kids in car seats, the HUGE back door is great when camping, or on the beach - with a half tent over top we plop a table up against the door and cook there protected from wind. The only thing I agree with you on is the blind spots - you definitely have to drive your FJ…
Hello! I love your videos and the way it is described and presented. Can you someday talk about that 1st gen Lexus IS300?
Mechanically, the FJ is a Tacoma/4Runner. They have a huge following out here in the SW part of the US.
As always, a very interesting video. I looked at the rust on the FJ and it looks bad to me, not that I think it's dangerous, or anything like that, but in Arkansas we don't get a lot of snow, but recently the highway department has started doing a pre treatment to the highways with a brine solution when they know it's going to be icy, and or snowing, once we get snow then they spread a mix of sand and salt. Fortunately, I don't have to drive my Avalon in bad weather. It stays in the garage. If I have to get out in bad weather, I've got an 02 Silverado Z 71 4x4. It spent a lot of time in central Missouri and is rusted in all the places you'd expect.
Makes me glad I can keep my Avalon in really good shape.
Another case where using a metal conditioner (undercoating) like Rust Check, Fluid Film or Krown oil would have prevented the rust and would have seeped into the fasteners making the issue of differing metals less of an issue. Also great for keeping bushings pliable.
The void in the back is where the 2nd tank is in a Prado 120.
All but the early FJ’s in Australia come with a 160L tank about 42 Gallons.
I’ve owned my FJ for 11 years and had to replace one wheel bearing and that’s it outside or normal maintenance.
by the way, when replacing the clutch on older Toyotas, in addition to checking and possibly refacing or replacing the flywheel it makes a great deal of sense to replace the rear oil seal on the engine (this seal uses a spring to maintain its seal tension). This replacement is fairly inexpensive and simple to do at this time, and is important since old seals often tend to start leaking oil.
@@efil4kizum for a 22RE, the OEM seal iis around $50 dealer price but available everywhere at around $25. If you are on a tight budget, Yota has this seal as open box, overstock, installed but not used, gently used, old stock or slightly blemished for $2.95. (reliable vendor-wont sell you junk) . It pays to shop around
As an FJ owner myself I always geek out over other FJs. Seeing how they're setup and talking to the owners and they all definitely have their quirks. I will say in all my time I have only seen less than a handful of manual transmission FJs.
In post 2012 Australian models the second tank goes where you showed the 'void' and as a result it has an overall 160 liters capacity. You can get it up to 180 liters if you use third party tanks.
A note on the purpose of the springs in the clutch friction plate. They do dampen the torque when engaging but they also dampen the torque pulses from the engine to the transmission. Not a big issue with a gas engine in a 4000- 6000 lb car but in a big rig where the most lugging torque, at 900-1200 rpm (where the work gets done) those pulses in a 15 liter diesel pulling upwards of 120,000 lbs (in Canada) those springs are vibrating like crazy.
Toyota has earned respect in my book, I have a 2006 Scion xA with 264,965 miles on it. I drive 100 miles a day round trip to work 5 days a week. Original clutch, radiator, water pump and just replaced the alternator which was the original. Motor does just over 4,000 RPM's when going 80 MPH, no engine noise when idling. Best money I've ever spent! Only complaint is lack of power, but the 1.5 L has proven to be bullett proof! Currently considering a 4 Runner to replace my Duramax 3500 which I just sold for $500.00 less than what I bought it for 9 years ago.
Correction 294,965 miles.
I bought a new one in 2011 sold it after a few years, I never new the back glass would open ! 😀
20 years with Toyota service , when u said windshield I fell over ! How true !
I really dig your subtle diplomacy!🤣
"Just get used to not seeing very well" True statement. Lol.
just bought a 2011 FJ with 190xxx...it runs very smooth, looking to keep it for a long time.... luv this channel...
Some old Deutz tractors had a defect where a part that cost probably less than 100 bucks cost 10k to replace. Because you had to dismantle the transmission to get at it. Deutz did solve the problem and the problem parts were replaced under warranty.
Owner of a '07 FJ Cruiser with a manual transmission with 186k miles. The clutch has been replaced twice, once in 2010 right before I bought it and again about 10 years later. I've had her for 13 years and that's the only major repair she's needed. Never done the windshield. I've been lucky and she's been incredibly reliable! We're about to do a bit of 200,000 mile maintenance early because of a leaky valve cover gasket and I've learned so much about my own truck, it's been incredibly interesting! Thank you for videos like this!!!
Nope, we're in OK. The need for salt is rare on our roads, thankfully. I can't say she's rust free but I've seen frames on FJs in the Midwest and do not envy them that.
You really explain it to us where we can REALLY understand, ur AWESOME........ ALOHA
As an Xb owner, I feel your pain with the windshield 😅
Also about the key the land cruiser prado has the same key, around the same year. Great channel.
I remember when I worked at Toyota I did a PDI on a manual one of these. They are nice
8:25: one has to immediately fall in love with the FJ seeing this. 🙂
Hey there! You crack me smile and laughing when the 5th time rotating this bearing with so weird noise :)
Exactly a manual transmission have this important part. However installed deeply inside. Thanks for good explanation of this problem.
Bye for now
I wasn't expecting the rust underneath with such perfect shape inside and body. It deserves a treatment underneath, the FJ cruisers are amazing.
Interesting video though i have zero connection to this car, but the logic is spot on, once you're in there, get things done. Hallmark of a great mechanic
I have a 07 FJ MT-- love it
I had 2007 FJ 6 speed w 321000 miles when I sold it last Spring..I bought it from the original owner w 315000 miles and he did the 1st clutch at 299000 miles! I buy and resell cars so this was one of my "cool " vehicles to own..BUT it was a GAS PIG Using Premium fuel..not fun lol..otherwise I had a great time with it!
I buy and resell ...I have a few videos on it..@@steveolive9991
Yeah why did you sell it?
@@georgeg1947 I buy and resell cars..I have a few videos on it..but it is a huge gas pig..so that was not fun! lol
@@steveolive9991like he said he buys and flips?! And a gas pig w/premium fuel not cheap
@@georgeg1947cleaned it and sold it for more...
This vid makes me miss my 07 FJ with the manual trans. I think my throw out bearing was going bad-though the symptoms were that it squeaked when running, and squeaking went away when clutch was pressed down. From what I’ve read, it’s a common issue unfortunately.
as a 2014 fj cruiser owner. i can agree with AMD he is on point with things. i guess i have been lucky (knock on wood) i have owned it for 5 years now and have not replace the windshield but i got a quote for it. WOW at the price. i will say mine is heavy modded. they are build like a brick sh*t house.
My Subaru svx went through two windshields in late 1990s and was over 2k each
I was quoted $150 for a windshield, in Chicago. Not including the white trim piece.
Remember seeing many FJ s in Kuwait, Saudi
Arabia and Bahrain. Obviously very popular in the desert. Don't remember them breaking down even with tough use by the military. They were quite fuel thirsty but this was the middle East and gas was cheap, really cheap. Kuwait military had quite a few of those units.
Yeah cheap,probably less than 5 cents a litre
Really miss my FJ, solid reliable car, its a shame is no longer being produced
They’re still produced. We’re just not allowed to have them anymore.
My God look at all that rust! So glad I'm in the desert southwest.
Same here, that's really not too bad for Chicago area.
My 92 Civic Si hatch with 462 thousand kms on it doesn’t have this much rust,it would be even better if I wasn’t driving in Alberta winters,I live on Vancouver Island so our vehicles are pretty clean even with high mileage 😎
I bought a 2003 4Runner a year ago and crawled under it before I purchased it. There was very minimal rust. When I brought it home, I sprayed rust reformer on the metal lines and connections to help prolong their lives. It will probably outlive me.
Man, the rust! I feel fortunate on mine being a 2008 TT located in SoCal. No rust on the ladder frame. The only thing I'm addressing now is the roof rain channel factory glue seams. It has a history of coming apart and leaking. I'm considering Rhino lining the roof and seam just in case. Thanks for the lecture, Professor!
Everyone in the Salt Belt knows winter is coming and the roads will be salted. If we choose to rustproof our vehicles with any number of credible products, they will remain perfectly solid. If we choose to neglect basic preventative maintenance we know our vehicles will rot. Rust = Neglect.
@@rightlanehog3151 I lived in the Rust belt (Michigan & Ohio) that "rustproof" only delays the inevitable (if the car is driven on the salted winter roads)
@@onenikkione I have been driving in Ontario for 43 years. The car I bought new in 2005 remains rust free because I take it to Krown rustproofing every year. Just like regular oil changes, rustproofing is fundamental preventative maintenance in the Salt Belt. Letting your expensive car rust away due to neglect is a choice not an inevitability. BTW there may be other products that are as good as Krown but as the host of the channel says - if it ain't broke don't fix it.
It can be saved rather easily.
Had an FJ… I loved it so much but it’s just so impractical overall 😂😂 still love it though
Good to know about the huge blind spot . I’ll be sure to give them lots of room to change lanes in front of me.
I don’t own a single Toyota that you address in your videos. I love your content. I’m considering a Toyota for my future next vehicle
I own 3 Toyota vehicles, a Tacoma, Corolla and Lexus IS. Newest is 11 years old, never been let down or stranded. Take care of your Toyota and they will take care of you!!
The Is300 sitting pretty at the back 😍👌
always learn something on tccn. I love the fj. Wish they still made it. But just like the 70’s the government has to put the squash on cars people really want and we have to be good little citizens and buy the cars the automobile manufacturers are allowed to produce.
To your comment about mechanics and how the easy to get to part never fails. Another mechanic of course, when you’re working under the hood and drop a nut, does it roll back toward your feet? No, of course not, it rolls to the center of the vehicle where you have to decide which side or front area do I need to crawl under to retrieve it. Murphy’s Law at work here.
I've driven manuals for many years and one thing that I've learned is to NOT keep the clutch pedal depressed at a traffic light. After the car has stopped, place the transmission in neutral and take you foot off the pedal. Heating up the clutch will only shorten it's life. I've had them last for a 100K miles.
I had the wiper blade issues until I threw Bosch Icon blades on it. 2 13A and one 16A. Had the same wipers for going on 5 years now! 6:00
Also, good to know about the ball joints. Mine seeped a bit but stopped. Currently at 148k.
I have a 2007 Fj cruiser that I bought new in august 2006, 4wd auto, sun fusion, 163k miles. It’s the best vehicle I’ve ever owned!! I still have the original windshield, got a chip in Wyoming September 2006, had it repaired, been holding up well. Had a second chip two years ago, had it repaired. I don’t get what your customers are saying about the wipers, mine work just fine. My headrests are always in the down position, so I have no problem with visibility out the back window. My Fj has the backup sensors, so that works 😢fine. Backup cameras weren’t available till 2010, but I get along well. I have an old style all metal ignition key, with a separate fob to unlock the doors. So it has no resemblance to modern land cruiser keys, as you stated. Love your channel, keep up the great work!!
Thankfully, living in Australia, we never see rust in a vehicle like that, I had an FJ cruiser loved it, but the seats were terrible. There was no support in them.
My 93 Toyota pickup with over 300,000 miles still has the original clutch.
My 92 pickup had the head gasket go at 326K+. I had a reman motor put in it and also a new clutch, since they were in there anyway. The original clutch still felt fine and the garage said it still had 30% left when they replaced it at 326K+.
I'm sorry to say I can't really answer that. my wonderful garage took it all apart for me and I honestly can't remember what they said about that. I'm sorry to be ignorant.
I will say that the clutch they put in made it 86 - 88000 miles. And I could feel the wear starting already, so they replaced it. they told me nothing lasts like the original Toyota stuff. Sitting at 415,400 miles now.. love my truck ❤
Love the FJC and I own a 6-MT model and I do agree that the blind spot is quite annoying. Toyota should have really made it a 4 dr truck instead of this 2 dr arrangement..
Try a freeze plug , $700 job for a couple dollar part. Happened on my 1998 Toyota sr5 ext cab pickup. Not even cool.
I had a 2007 manual FJ purchased new by me in 2007. Of the 10 vehicles I have owned it had the most problems. I went through 2 of these throw out bearings, a failed seat height adjuster on the drivers seat, power door lock failure, failed front CV axle, rear diff failure. All at under 50k miles. At 49k and 35 months old the warranty was about to expire. I picked it up from the dealership for the second throw out bearing replacement and drove straight to the Jeep dealership and traded it in for a wrangler rubicon. I drove that wrangler daily to 110k miles before selling it with never an issue besides some soft top leaks.
I now have a GX460 which has the becoming common transmission codes P2714 P0761 which no one knows how to fix beside a new tranny. I have had the worst luck with Toyotas!
I would spray the Land Cruiser with oil undercoating. I live in Toronto and I spray my 2005 Camry yearly and it looks amazing including underneath the car.
The belt tensioner on my 2009 tacoma broke. Total repair bill was over $1600.
@@efil4kizum v6.
@efil4kizum the cost was due to having to evacuate the ac system in order to remove the compressor to replace the tensioner. Then recharge the ac system
@efil4kizum the cost was due to having to evacuate the ac system in order to remove the compressor to replace the tensioner. Then recharge the ac system
We sold our FJ a couple of years ago and bought a 3 year newer 4 Runner for the same money. Best decision we ever made.
Bought my son, stationed in Alaska, a 4Runner after he said the FJ Cruiser had too many drawbacks.
You can't get a 4Runner with MT.
my dad had a 2014 offroad with low miles, and it was a quirky vehicle for sure, but man they are great offroad. that said, ours got terrible mileage and you will for sure replace that windshield once every 1-2 years without fail lol.
They make a 2 Wheel Dr. 4runner as well. Presumably for people who know they're not going off-road but still want that look. I believe there's a word in the English language for those folks. Of course at least they're being honest, unlike all those people who never go off-road but have the four-wheel-drive versions
RWD in a SUV or pickup will still provide good towing performance. A FWD CUV on a boat launch can be scary.
I’ve seen a short women driving FJ cruiser with rear window open and she stood on the bumper to get things in/out and says try doing that without hitting your head on the Rear window! 😂
The wiper set up was definitely not made for cold weather climates. I had countless customers complain to me bout the defrost not working on the windshield ice built up on the rubber of wipers. I’m in Alaska
love my 08 FJ with 6spd MT and full-time 4WD. I'm hoping Toyota releases the next 4Runner with a manual transmission with full-time 4WD. Toyota needs one in its SUV line-up.
I hope the next 4Runner or the upcoming Land Cruiser FJ will offer a manual option.
This is the most comical review I have heard from your channel. I appreciate that!😅😅😅
I appreciate your knowledge, and helping others, thank you! I have a 2014 2.5l camry. The PCV valve costs 10 bucks. It took dealer technician an hour to replace. I got charged 5 hours labor! I paid under much protest, manager said just because tech knew shortcut, still got to go by their book,630.0$
Yeah, that PCV is in a strange spot. I was able to change out but it took me 1.5 hours. Patience is KEY.
There is a video on this channel dedicated to that PCV valve change on the 2.5 engine.
I daily a 2013 with the Off Road Package. One of the first things I did was spent a week cleaning and repainting the frame. There was surface rust on the rear differential and the welds. I don’t live in the rust belt but I do live near the ocean and I want this vehicle to last me decades. Keep up the maintenance and these vehicles will never let you down.
If I was an owner I would be concerned with the degradation of the chassis because of rust. All of that will eventually catch up with not unsubstantial costs. It is still a very cool truck with a great following.
Great work...replace clutch plate, pressure plate and throw out bearing while doing the surgery.
We paid over $800.00 to replace two $00.35 cent o rings in the ac of a three year old Subaru. I felt taken. Maybe silicone washers could hold up better?
In AutoShop class and grade 7. In Canada, I took the wheels off of FJ first vehicle. I work done.
Thank you AMD for the great video. Have had to have a few clutches replaced! Guess I was pretty hard on them. Sure liked driving tho!
In defense of the FJ cruiser.
Those that bought these new, and took care of them, put an average amount of miles on them (12k miles per year), could sell this vehicle for just a couple hundred less than what they bought them for 4 years later.
Cant wait to see the clutch job video (if you recorded it). Love your passion for Toyota and your careful explanation about these cars!
Nicely done. Now I know what an FJ is. They always catch my attention but I've always thought that for my life style my 2010 Taco is more appropriate. And I was right. The FJ reminds me of the Jeep CJ5 that I once drove . Great transportation including off road and very classically designed but otherwise short on space and other amenities.
Ah memories! I had an AT 2011 FJ from new to 2018 (then went to a 4runner). Was a fun, reliable and unique vehicle. Definitely Woolwax the frame, made a world of difference in the rust battle.
All great points and overview, that windshield, I was on a first name basis with the Safelite Glass repair guy. Visibility was horrible, and those wipers! Loved every minute of it though.
I think that is what I am hearing on my 6 speed 2014 Corolla oh no! 150.000 miles on it might be time anyway. Thank you and your Car Care Nut crew for your great content and videos.
I sold the first one at my dealership in Tampa Florida when I sold New Toyota vehicles over 10 years. I had to teach new salespeople do the walk around. Just like you are doing. I had to teach the mechanics a walk around too, at the begining.
Love the FJ Cruisers. My first was 08' manual back in 12'. My current one is the 14' TTUE that I am never getting rid of.
Loved the review of the FJ. I have always been intrigued by these and your walk through was very informative. I have had Toyota 4x4 pickups since 1989 (first the basic pickup and subsequently two Tacomas). Absolutely love my Toyotas! Any chance you can get a hold of one of the 2024 Tacomas and do a walk through of these? It would be a great comparison with the walk through that you did last year of the 2023 Tacoma before they made the Gen 4 changes found in the 2024. Thanks for considering this. Love your channel, AMD. I always learn something!
Nice to see the rebuilt Lexus in the background
The nicest FJ I've seen.
Love your videos. Had been following you since the 2020 pandemic when you were starting out!
Please do more videos of a Corolla and, of course, update on your 600,000 mile Lexus. 🙂
10:04 and 12:58 = mechanic speak... i love this guy!!
AMD. just wanna say thank you for all the great toyota/lexus info. have a good day!