@AJaytheCEO Thank you for the response. Can you point me to one of your videos where you showed how it can be done? My church has the Atem studio hd, worship extreme and obs. Do we need 2 computers to run this setup?
When you switch from the bible verses to the lower third, are you switching scenes in OBS or just switching sources within a scene? Would really like to see the video footage of how you have your scenes and sources set up to make this happen.
@@AJaytheCEO understood, but how are you turning the lower third on and off with the bible verses? That has to be controlled in obs. DSK is all on or all off, not switching between. Thus it makes me think you're viewing/hiding the sources within a scene using the eyeball icon.
Do you have any videos of how to do this using Easy Worship? I use the atem every week in church. On my input 1 I have it mirroring our windows computer for countdowns and exit loops, inputs 2 and 3 are my camera angles. I am trying to find out how to put lyrics on cameras 2 and 3. Any help you have would be appreciated.
@@AJaytheCEO I have the virtual monitor setup using the dongle. I may be getting lost on setting OBS up to link to that "monitor" but everything seems to follow what you stated in your video. Thanks for quick response, i'll keep poking around until i get it.
Thanks again Ajay for another useful tip. We use ProPresenter full screen with PIP for the picture (speaker) with OBS as the switcher. We had one of the ATEM mini's, but no multiview. Guess we could have tried an HDMI splitter. Anyway, thanks again.
Thanks. A diagram showing ATEM MIni ports and as you reference a connection in your narrative you could zoom in/cut to the diagram illustrating the connection with source target info.
Hi, thanx for your video. We use a 4M/E Broadcast Studio 4K and we want to use OBS for lower thirds. So, we have an open output on the graphics card. It’s HDMI out and I connected it to a Black Magic HDMI to SDI converter, it then goes to an input on the switcher. Then I configured DSK 1 and configured fill source etc to the input but nothing happens. Did I something wrong? Resolution, framerate works fine. Please explain de scenes settings. Tried everything.
I need this one thanks for this video, I use my lower third on the propresenter using upstream key and nothing is showing , i will try the downstream key if it works
Upstream key is for stuff like the weather on the news (image behind person standing in front of a green screen. downstream key is for placing graphics on top of live video
This is so good. Need some help though being new to OBS. 1. Are you using one computer to do all this? 2. What are the softwares used? Just want to have a clearer understanding. Thanks much
Hi Ajay. How do you get the background to be transparent? I have a png with a lower third that was created with a transparent background, however the Atem doesn’t see the transparency when I enable the DSK and instead shows a black background behind the lower third. Thank you!!
I understand it...perhaps I'm missing something. (Thinking) I get that the 2nd output from OBS is going to the ATEM input #2 for the lower third. So the streaming output is going to (or thru) the 1st output from OBS to the streaming platform (FB, YT, etc.)? (I'm picturing this in my mind on how this works out)
**PLEASE NOTE** this is for streaming with the ATEM directly not with OBS. OBS is used only as a lower third generator not for streaming as well.
I use this same technique to push out my graphics using H2R Graphics when I do cheerleading competitions
Thanks for the tuitorial....lot's of appreciation from Kenya. I'll have to try it practically
You are welcome
Exactly what I was looking for! Thanks so much for the detail. Plan to give it a go tomorrow.
Glad I could help!
This was very helpful
thanks
Thanks for these great tips.
GReat video. Straight forward. I would assume you could bring in anything like a zoom call or video clips this way too right?
That is correct and thanks
Thank you for the insight. I have a question: Can you use this same setup and live stream at the same time?
Yes you can
@AJaytheCEO Thank you for the response. Can you point me to one of your videos where you showed how it can be done? My church has the Atem studio hd, worship extreme and obs. Do we need 2 computers to run this setup?
Thank You!!🙏🙏
You are so welcome
sharp!!!!👌🏽👍🏽...thnQ kind sir....
THANKS!!! It would be hepful to show the commands in the atem or software to show and hide the DSK
Thank you i understand it
great
When you switch from the bible verses to the lower third, are you switching scenes in OBS or just switching sources within a scene? Would really like to see the video footage of how you have your scenes and sources set up to make this happen.
I'm not switching scenes at all I'm just turning on the dsk on the ATEM which sends that to OBS along with the video.
@@AJaytheCEO understood, but how are you turning the lower third on and off with the bible verses? That has to be controlled in obs. DSK is all on or all off, not switching between. Thus it makes me think you're viewing/hiding the sources within a scene using the eyeball icon.
Do you have any videos of how to do this using Easy Worship? I use the atem every week in church. On my input 1 I have it mirroring our windows computer for countdowns and exit loops, inputs 2 and 3 are my camera angles. I am trying to find out how to put lyrics on cameras 2 and 3. Any help you have would be appreciated.
Yes I do have a video showing the same setup with easy worship
I don't know what i'm doing wrong but I'm rewinding and following these steps and I cannot get my OBS scriptures/lwr 3rd into the ATEM.
What is happening?
@@AJaytheCEO I have the virtual monitor setup using the dongle. I may be getting lost on setting OBS up to link to that "monitor" but everything seems to follow what you stated in your video. Thanks for quick response, i'll keep poking around until i get it.
Thanks again Ajay for another useful tip. We use ProPresenter full screen with PIP for the picture (speaker) with OBS as the switcher. We had one of the ATEM mini's, but no multiview. Guess we could have tried an HDMI splitter. Anyway, thanks again.
You are welcome
Thanks. A diagram showing ATEM MIni ports and as you reference a connection in your narrative you could zoom in/cut to the diagram illustrating the connection with source target info.
This is great. I am using a Mac Mini. How do I make it work with the Mac Mini?
Sadly this doesn't work with Mac currently
Hi, thanx for your video. We use a 4M/E Broadcast Studio 4K and we want to use OBS for lower thirds. So, we have an open output on the graphics card. It’s HDMI out and I connected it to a Black Magic HDMI to SDI converter, it then goes to an input on the switcher. Then I configured DSK 1 and configured fill source etc to the input but nothing happens. Did I something wrong? Resolution, framerate works fine. Please explain de scenes settings. Tried everything.
I need this one thanks for this video, I use my lower third on the propresenter using upstream key and nothing is showing , i will try the downstream key if it works
Upstream key is for stuff like the weather on the news (image behind person standing in front of a green screen. downstream key is for placing graphics on top of live video
Thanks for your constant help.
Can you do a review of the AV Matrix switcher?
No promises but what is the exact brand and model name?
@@AJaytheCEO Avmatrix HVS0402U
Thanks
Hello! How did you get both the lower third and the scripture to be on at the same time?
This is so good. Need some help though being new to OBS.
1. Are you using one computer to do all this?
2. What are the softwares used?
Just want to have a clearer understanding.
Thanks much
I am only using one computer running OBS and an ATEM Mini Pro or higher to do this.
Hi Ajay. How do you get the background to be transparent? I have a png with a lower third that was created with a transparent background, however the Atem doesn’t see the transparency when I enable the DSK and instead shows a black background behind the lower third. Thank you!!
Did you make sure the fill and key on the atem is the media player?
I understand it...perhaps I'm missing something. (Thinking) I get that the 2nd output from OBS is going to the ATEM input #2 for the lower third. So the streaming output is going to (or thru) the 1st output from OBS to the streaming platform (FB, YT, etc.)? (I'm picturing this in my mind on how this works out)
This is for streaming with the atem not for streaming with OBS
How do you send the OBS Lower Thirds to ATEM using PRISM Live Studio?
ua-cam.com/video/YSZWEtfYKa4/v-deo.html
Question. Anything With Black In It Appears To Be A Little Transparent. Any Reason Why That Is?
The atem removed everything black. You need to pick a different color or change the gain under desk settings
Appreciate It
@@AJaytheCEO Thanks You Again And I Did Find Out That If I Lighten Up My Black Just A Tad. It Works Perfectly!!
Thanks for another informative video. I’m still at square one. I will figure it .
You can do it!
didn't work for me
Is obs showing in your multiview?
@@AJaytheCEO it was user error. I got it working