I both learned how to put the tensioner in correctly (was initially putting it below the slot instead of in it) as well as the fact there's a needle holder on the machine 🤣
Love your tension fork and greatly appreciated the guidelines for using I t with various yarns...made it possible for me to "tame" a DK yarn that had not been working well with my Addi... now it's great when I used the tightest tension! Also...great idea for "storing"the tensioner on the machine...very smart!
Hi. I just received my tension forks yesterday, very nicely packed envelope with samples etc. I will be using them over the wkend. Will let you know how I get on. Thank you for good service. Jean Simpson from England.
I love my tenion fork that I bought from you, can you tell me how many rows do you do for a mans hat using the loose hole? My husband passed away two weeks ago on our 60th Anniversary and I'm so lonely. I'm trying to keep busy with my Addi machine. Thank you so much. Pat
Hello Pat, I am very sorry for your loss. I hope that you are able to keep busy with the knitting machine, there are so many things you can make with it to help fill some time. I generally use my Sentro 48 pin machine for adult hats, my husband doesn't care for the ones made on the Addi he thinks they are too tight, though I have only done them using the middle hole and I used my Smart Beanie Recipe. For my adult hats I do about 120 rows or so and it is a good fit for most heads. I would think 120 should work if using the 3rd hole, it will be a good starting point if nothing else.
Do you have a small chart regarding which tension hole to use? I think I used “I Love This Yarn” from Hobby Lobby to make a beanie for my 6 yr. old granddaughter. Her head size is about 20+1/2 inches around. I used the Tight hole and the beanie is too tight on her head. Is it a just try it and see technique? Thank you!
I don't have a chart posted anywhere with the tension I used with specific yarns, I do include an instruction card with each purchase with suggested tensions but it is more of a guideline than a chart. I haven't used ILTY in a while so I don't know off hand what tension would be best, but I think moderate might work. I usually use my Sentro for Youth and adult beanies on tight tension. I feel the 2 extra stitches n the Sentro helps give a bit more room. Trying just the 2nd hole (moderate tension) should be a good place to start and see how it goes.
I wouldn't suggest using a size 6 yarn, that would be too heavy of a yarn to use with the machine without damaging the gears. Heavier yarns put too much stress on the pins. There are some lighter weight size 5 yarns that I have used with success like Lion Brand Scarfie but in general I mostly use the recommended weight yarns which are 3's and 4's.
No, Addi machines do not have a tensioner, so I created this tool to use with it. I designed it specifically to be used with the machine and I sell them in my Etsy Shop.
Thank you! I think you are asking if you ran more than one strand of yarn using the 3rd hole (farthest from the machine) would it be loose enough for a mens hat? If so, I think it would depend on the yarn you are using, it is hard to suggest what hole to use unless I know what yarn.
My shop is savlabot.etsy.com I am closed for my winter break so I don’t have the tension forks listed right now. I will have them back in the shop in January.
Unfortunately that is the cost of shipping to Canada, I am in the US and have tried to bring the cost to ship the product down, but that is what USPS charges to mail from the US to Canada. I don't even charge for the shipping materials, the instruction sheet or the info card, which do cost me money to make and provide with each order. I do wish that the price to mail was cheaper, but other methods that I have tried result in the tension fork breaking, so mailing as a parcel is the best way to mail them.
I both learned how to put the tensioner in correctly (was initially putting it below the slot instead of in it) as well as the fact there's a needle holder on the machine 🤣
I had my machine for a very long time before I realized the hole was a needle holder 😀.
Very good point with being able to see the row counter! I’ve seen colored ones out there. I’m glad I haven’t ordered one yet!
I just ordered mine in red. It looks very well made. I can't wait to get it. Thank you 😊
Perfect instructions and I love the Etsy ad ❤️
Love your tension fork and greatly appreciated the guidelines for using I t with various yarns...made it possible for me to "tame" a DK yarn that had not been working well with my Addi... now it's great when I used the tightest tension! Also...great idea for "storing"the tensioner on the machine...very smart!
Thank you, I am so glad to hear the tensioner has helped you with a tricky yarn. It makes me so happy to hear that you like it.
Hi.
I just received my tension forks yesterday, very nicely packed envelope with samples etc. I will be using them over the wkend. Will let you know how I get on. Thank you for good service. Jean Simpson from England.
Thank you, I really hope you like the tension fork and find some uses for the little goodies I added in.
Thank you so much for the demonstration. I’m glad you made this video.
Thank you so much I ordered the fork tension guide and will put them into good use now that I have them ☺👍
Placed my order can’t wait to use it
Thank you so much ❤
I love my tenion fork that I bought from you, can you tell me how many rows do you do for a mans hat using the loose hole? My husband passed away two weeks ago on our 60th Anniversary and I'm so lonely. I'm trying to keep busy with my Addi machine. Thank you so much. Pat
Hello Pat, I am very sorry for your loss. I hope that you are able to keep busy with the knitting machine, there are so many things you can make with it to help fill some time. I generally use my Sentro 48 pin machine for adult hats, my husband doesn't care for the ones made on the Addi he thinks they are too tight, though I have only done them using the middle hole and I used my Smart Beanie Recipe. For my adult hats I do about 120 rows or so and it is a good fit for most heads. I would think 120 should work if using the 3rd hole, it will be a good starting point if nothing else.
Good , easy and informative instructions for using your tension fork and I love Gorilla glue
Thanks Mom 😁, I am guessing the ad you watched was Gorilla Glue 😆.
I love ads, I truly do, can't get enough of Gorilla Glue
@@Savlabot kewl
Best thing I ordered.❤
Thank you, I am so glad you like it 😊
Do you have a small chart regarding which tension hole to use? I think I used “I Love This Yarn” from Hobby Lobby to make a beanie for my 6 yr. old granddaughter. Her head size is about 20+1/2 inches around. I used the Tight hole and the beanie is too tight on her head. Is it a just try it and see technique? Thank you!
I don't have a chart posted anywhere with the tension I used with specific yarns, I do include an instruction card with each purchase with suggested tensions but it is more of a guideline than a chart. I haven't used ILTY in a while so I don't know off hand what tension would be best, but I think moderate might work. I usually use my Sentro for Youth and adult beanies on tight tension. I feel the 2 extra stitches n the Sentro helps give a bit more room. Trying just the 2nd hole (moderate tension) should be a good place to start and see how it goes.
Thank you so much.
Can this be used addi king size knitting machine?
Yes, it works with the King size too.
Can you use bulky (6) yarn with tensioner on addi?
I wouldn't suggest using a size 6 yarn, that would be too heavy of a yarn to use with the machine without damaging the gears. Heavier yarns put too much stress on the pins. There are some lighter weight size 5 yarns that I have used with success like Lion Brand Scarfie but in general I mostly use the recommended weight yarns which are 3's and 4's.
Did the tension fork come with your mechine
No, Addi machines do not have a tensioner, so I created this tool to use with it. I designed it specifically to be used with the machine and I sell them in my Etsy Shop.
Just ordered couple. Question if i ran to strands on the third hole would it ne ok for mens hat. Cheers
Thank you! I think you are asking if you ran more than one strand of yarn using the 3rd hole (farthest from the machine) would it be loose enough for a mens hat? If so, I think it would depend on the yarn you are using, it is hard to suggest what hole to use unless I know what yarn.
@@Savlabot sorry about the spelling fat thumbs. Yer two strands. Its a weight 3 wool we all it DK in the uk. Cheers for the reply
@@johnbayliss7124 I think the 3rd hole will work with two strands of a size 3 yarn. Should give a lose enough fit.
Are you still selling these? I hope so!! I clicked on the link above and it says it's not available.
They are back in stock, I was closed for my winter break but my shop reopened today.
Looking for this tension fork on Etsy but can only find one, not sure if it’s yours. Could you please tell me the name of your shop? Thank you 😊
My shop is savlabot.etsy.com I am closed for my winter break so I don’t have the tension forks listed right now. I will have them back in the shop in January.
Thank you 😊
Did addi mechine popping when going the counter
There is a loud click that comes from the machine with the counter turns over.
Is there a place other than Etsy to purchase your product? To ship to Canada it costs over $19 to ship it for a $10 product.
Unfortunately that is the cost of shipping to Canada, I am in the US and have tried to bring the cost to ship the product down, but that is what USPS charges to mail from the US to Canada. I don't even charge for the shipping materials, the instruction sheet or the info card, which do cost me money to make and provide with each order. I do wish that the price to mail was cheaper, but other methods that I have tried result in the tension fork breaking, so mailing as a parcel is the best way to mail them.
Thanks for the information.
Where can I buy this tension fork ?
I have a link in the description, I sell them in my Etsy Shop
My tension for came with no instustions
If you send me a message from your order I can have a new one mailed out to you.