yes, with linear pattern it can be done. But, When you take this conveyor assembly as a subassembly in another Project to create the motion study of a giant assembly then in that case the linear pattern won't work. Linear pattern or any pattern is suitable (to perform motion) only in the same assembly. This Project was a part of U shaped conveyor project (available on channel) that's why belt was used.
I want to change colors of a part in solidworks motion. I'm really having trouble in doing that. can you help me in any way. actually i wanna create an animation in which colors of a part change. kindly reply soon!
It is possible to hide and Show a Part in Solidworks Motion/Animation But As far as I know it is almost Impossible to change the color in between the motion study/Animation. But If you want to show that color change at any intermediate time then i think you can follow this approach; >Assign Part 1 (let's say) a colour >Create a copy of same part (in assembly) with different name (Let's Part 2) and assign it the desired colour >Mate the both parts in such a way (like one super imposed over another) that Part 1 and Part 2 moves simultaneously [Keep part 2 Hiden till the time] >The Time at which you want colour change, Hide the Part-1 and Show the Part-2 (using KeyFrame at that point of time) I hope this may help you.
I am suffering from this error Failure to satisfy velocity initial conditions. A probable cause is an over-specification of initial velocities of bodies. Please specify fewer initial velocities and try again
6:27 if you applied contacts properly and still the box is falling then: 1. Before Going to Create Motion Study, Make sure that the Box is not penetrating the rollers anywhere (keep the box slightly above the rollers) 2. Create a New Motion Study 3. If Still Fails then Create a New Assembly and give a try. Check these similar tutorials: ua-cam.com/video/yPrzRc3g_xc/v-deo.html ua-cam.com/video/8UQmtxg3ry4/v-deo.html Hope this will help you.
Great !, are you sharing those solidworks files ?
This is perfect work! More one subscrited in your channel!
Thank you very much! Welcome.
Cool job bro ,But i think the belt not more important because really i did it without belt form using linear pattern
yes, with linear pattern it can be done.
But, When you take this conveyor assembly as a subassembly in another Project to create the motion study of a giant assembly then in that case the linear pattern won't work.
Linear pattern or any pattern is suitable (to perform motion) only in the same assembly.
This Project was a part of U shaped conveyor project (available on channel) that's why belt was used.
Do you have the models for the foots?
want that too
I did exactly as you did but the box keeps falling down. PLEASE help me
How can I get the parts for assembly?
Hi, i have a doubt. I did exactly as you did but the box keeps falling down. Are there any mates to be done on the box? Plz reply
Make the contact between box and Each and Every Rollers + Side Frames. (In contact materials:Choose Aluminum dry for better accuracy)
Thanks😊. So the box has to be just positioned on top of the rollers and given contact, no mates for the box right?
Yes
I want to change colors of a part in solidworks motion. I'm really having trouble in doing that. can you help me in any way.
actually i wanna create an animation in which colors of a part change.
kindly reply soon!
It is possible to hide and Show a Part in Solidworks Motion/Animation But As far as I know it is almost Impossible to change the color in between the motion study/Animation.
But If you want to show that color change at any intermediate time then i think you can follow this approach;
>Assign Part 1 (let's say) a colour
>Create a copy of same part (in assembly) with different name (Let's Part 2) and assign it the desired colour
>Mate the both parts in such a way (like one super imposed over another) that Part 1 and Part 2 moves simultaneously [Keep part 2 Hiden till the time]
>The Time at which you want colour change, Hide the Part-1 and Show the Part-2 (using KeyFrame at that point of time)
I hope this may help you.
I am suffering from this error
Failure to satisfy velocity initial conditions. A probable cause is an over-specification of initial velocities of bodies. Please specify fewer initial velocities and try again
did you add motor to roller?
@@SolidworksFunPraveenSingh Yes please help
if you followed every steps of the tutorial and still found the error then
Try:
Creating a New Motion Study
or New Assembly from the Start.
how can provide motion for a L shape conveyer
you can watch this ua-cam.com/video/KwEq4hb9Wqc/v-deo.html
Can u send step file sir...?
I did all contacts
6:27 if you applied contacts properly and still the box is falling then:
1. Before Going to Create Motion Study, Make sure that the Box is not penetrating the rollers anywhere (keep the box slightly above the rollers)
2. Create a New Motion Study
3. If Still Fails then Create a New Assembly and give a try.
Check these similar tutorials:
ua-cam.com/video/yPrzRc3g_xc/v-deo.html
ua-cam.com/video/8UQmtxg3ry4/v-deo.html
Hope this will help you.