Belltech drop kit update-I do not like it!
Вставка
- Опубліковано 10 вер 2024
- It’s been a bad couple of months with the drop kit. It bottoms out so much, and you can’t carry that much weight on the back of the truck. I’m going back to stock. I’m selling the old setup complete with relocation bracket and rear shocks.
Bro if your rear axle is hitting the frame you need a c notch kit, its not uncommon to do certain amount of drops on different vehicles and for the axle to hit the frame without a c notch kit
This guy is high asf lmao
Seriously though lol
What drop do you have...2/4? Or 4/6. I havnt heard any bad things on the 2/4 drop.
I have a 3/5 belltech performance drop on my 2019 F150. Zero problems bottoming out. I would not know if the shocks that came with this kit would have bottomed out, but I proactively went ahead and got the pro comp es9000 shocks for the rear because a couple of guys I know had problems like you with the base kit (not the performance handling kit with adjustable coilovers) and solved their problem with the ES9000 rear shocks. If and when the rear shocks wear out then I will try the shocks that came with the kit and see how that goes. For now I have a perfect ride.
You have to cut off the bump stop cups completely. I did a 4/6 drop and you can't have them at all . You can get some adjustable
shocks and helper bags to make it usable for everyday .
XxXCasinoXxX i thought about cutting them off but the new springs are not as heavy duty as the originals so any load makes them compress easily. I already changed back to stock.
2015 Ford F-150 having the same problem as him with my belltech 3/5.5 inch drop kit. I have the stage 3 upgraded street performance shocks front and rear and I’m running the aftermarket front springs not the stock with zero strut spacers, and they claim you don’t have to cut or mod the frame for the kit. That’s bullshit! Anything more than 3.5-4 in the front and 4-4.5 inch in the rear you have to either notch the frame or run support bags to lift it up while driving around. They should add that info so consumers know what they need before they beat their frame up trying to have a little fun.
You should try a towing bags. They'll keep you level while loaded
I had a shop install a full beltech drop kit with spindles and the rear hits hard on minor potholes and it’s not tight like I thought it would be any suggestions also I’m getting rubbing ft end sounds like plastic inner housing Oo yea it’s a 2013 chevy avalanche 4’/4’ drop ft and rear
Did you put the belltech shocks or factory?
A c notch here in Hawaii would make it impossible to get a recon permit making it impossible to register with DMV.
I know this video is old. But thanks. I was wondering if anyone else was having the same issue w/this kit. Have you found a solution
Question??? what size drop do you have?
That's the problem with coilovers thts why I'm looking for advice to make a choice if I put a set of belltech coilovers to my 2011 chevy colorado
I have a 2/4 Beltech drop and rear is bouncy as hell. What can I do about this?
Traction bars
Did you use a 2/4 kit?
How much did you drop it?
If you have sold the relocation bracket I am interested! My son lives in San Antonio I would have him pick up for me !
Did you sale it ?
which drop was it? and have you sold it already ?
Tyler R belltech drop and not yet
Helper bags probably could have helped you out.
I have a 5/10 drop mine don’t hit frame lol
He don't know jack
The lowering kits are ment for show more than work
Free travel mod. That’s what you need for to do.
Is there a brand you suggest for a 2016 ram single cab?
Feel stupid looked it up right after I sent that
Can we still tow cars on a 2/4 drop ?
My cousin has a 4/6 drop with a c notch and tows a 4dr side by side all the time .
Absolutely
C notch
Cuz you need a underbed notch bro
Why do white people always say bud.do you know what a buddy is in the joint lol
Good thing we're not in the joint. Prison rules don't apply out here
If u take it off are u gona sale it?
sotopr7 i already took it off and it’s for sale already. Everything for $450
Sell*
All you have to do is C Notch it. You can’t really complain about about the product itself, when lowering a truck you can’t expect it to ride/perform like factory unless you know what you have to do in order to accomplish that
Still got it I’ll buy it now for 450$ with relocation brackets
Bryan Hardy hey I’m barely seeing this. Yea I got the kit.
C notch it kid
Get a c notch
Well duh,
Why do Hispanics always say on instead of in. You don’t sit on the truck you sit in the truck. You don’t put money in your wallet. You put money in your wallet.