Y&H 2200W/3200W Hybrid Inverter Connection, Setup 01SUb Solar Priority Demonstration Teaching Video

Поділитися
Вставка
  • Опубліковано 12 січ 2025

КОМЕНТАРІ • 41

  • @fauxque5057
    @fauxque5057 Рік тому +2

    You're about the only one who actually uses ferrules on stranded wire. It's the right way to do it.

    • @yonghuisolar
      @yonghuisolar  Рік тому

      Thank you for your praise. Our technicians have more than ten years of work experience, and they are also able to do some small details.😁😁

  • @styleauto1025
    @styleauto1025 6 днів тому

    no breaker on the battery for protection?

  • @jamesjjs2
    @jamesjjs2 Рік тому

    I adapted two fan Noctua - nf-a6x25 flx in an inverter similar to it. I changed the position of the temperature sensor the right side to work. It was be great. Finished the loud noise.

    • @yonghuisolar
      @yonghuisolar  Рік тому +2

      Hello, yes, the sound of this kind of machine is a bit noisy when it is working, so we generally recommend that customers install it away from the bedroom.

  • @Billie-solarproduct
    @Billie-solarproduct Рік тому

    Cool! and now a new portable solar panel is coming out, and it's Perfect for hiking, camping and garden. foldable and portable.

    • @rx_mattskii
      @rx_mattskii 10 місяців тому

      Lol 😅 exactly what I thought too!

  • @saintsaint8482
    @saintsaint8482 7 місяців тому +2

    Can I use this Imverter with only solar panel with battery?

  • @mikepeck6633
    @mikepeck6633 7 місяців тому

    Hi, just a few questions about the 2.2kVA(1800W) unit:
    1) What size/type of breakers would you use for 2.2kVA/12V/230V for UK use in camper setup i.e. AC IN/OUT, inverter to battery and PV?
    2) Can you use a metal (backing) base for mounting?
    3) When it says 55-450V for the solar(PV) voltage, does that mean Voc?
    4) What minimum Ah battery would be recommended?
    Many thanks - Mick

  • @Tumbleweed5150
    @Tumbleweed5150 Рік тому +1

    I would advise folks to add a fast-breaking T-class fuse as close to the battery positive as possible. I was advised that 7" or nearer was best.

    • @yonghuisolar
      @yonghuisolar  Рік тому

      Yes, a circuit breaker must be used between the battery and the inverter.

  • @adb8478
    @adb8478 9 місяців тому

    Hi. Could you please check if the inverter has USB (Utility first) as an available output source priority (parameter 01, in the manual only appear SUB and SBU)? Thanks!

  • @DavidSmith-qp7yk
    @DavidSmith-qp7yk 6 місяців тому

    what are those cables called the one you use to connect the AC in an AC out? do they come with the unit when you buy them? Does the battery connection also come with the unit?

  • @MkatekoChestar
    @MkatekoChestar 6 місяців тому

    Sir Does the inverter run if u remove pv and Ac cables but plugged to the battery only can u able to run appliances?

  • @jaromirluzar2625
    @jaromirluzar2625 9 місяців тому

    hello everyone, I have an SP-3200 but I don't have an option in the settings [5] lib, I only have agm, fld, use, is there a way to set it to lithium batteries? possibly there is something like "firmware update" thanks

  • @luigibetnunez4550
    @luigibetnunez4550 7 місяців тому

    Hola! Donde se puede conseguir piezas de repuesto?

  • @Tumbleweed5150
    @Tumbleweed5150 Рік тому

    Is this available in the USA, or if not, when do you folks plan on marketing it here. I have lots of off-grid friends who would LOVE the 12V version of this! Thanks.

    • @yonghuisolar
      @yonghuisolar  Рік тому

      Hello, we sell this in the US, you can place an order here, this one is shipped from the US
      www.yonghuisolar.com/products/y-h-2200w-solar-hybrid-inverter-max-pv-2000w-dc55-450v-input

    • @Scott-ig1zd
      @Scott-ig1zd Рік тому

      @@yonghuisolar 230v single phase is EU spec, your 2200w aio would be perfect at 120v single phase for small off grid cabin.

  • @haroonharoon2315
    @haroonharoon2315 9 місяців тому

    Amazing ❤❤❤❤

  • @kamamahoe3248
    @kamamahoe3248 10 місяців тому

    Does anyone know what caused an error or fault code 10?

  • @captainpacific6796
    @captainpacific6796 9 місяців тому

    Option 26 and 27 are same(charging cutoff voltage)? In my manual option 26 bulk charging voltage and option 27 floating charge voltage. Are you sure options 26 and 27 could contain same settings 14.4V for lifepo4 battery?

    • @aleyer_s
      @aleyer_s 4 місяці тому

      They shouldn't

  • @Funny_Animals_cafe
    @Funny_Animals_cafe 20 днів тому

    Where is audio

  • @seobotsengmoloi8767
    @seobotsengmoloi8767 5 місяців тому

    Can this inverter work without AC

  • @reynold.lariza
    @reynold.lariza Рік тому

    this supports LFP batteries?

    • @yonghuisolar
      @yonghuisolar  Рік тому

      Hello, this is the battery type supported by this machine: Seal/AGM/Gel/Flooded/Lithium.

  • @rolf8384
    @rolf8384 9 місяців тому

    Hello Y&H, I can't say anything about the quality of the product and it may be ok, I myself ordered the version with 1500W but the operating instructions clearly stated that this inverter must be installed on concrete or masonry. Therefore it was unusable for me and I returned it. But that's exactly when it becomes clear who you're dealing with. Long story short: Apparently no return label could be printed and I had to pay in advance. I did it. Now, 4 months after Ebay's case was decided in my favor, despite photos of the receipt, shipping label and tracking number, Y&H has not refunded anything, Y&H is demanding the shipping costs back. Since it is normally sent to me via Paypal, this is possible. These are my experiences do with it what you like.

  • @alejandrobetancourt339
    @alejandrobetancourt339 10 місяців тому

    Porqué el mío siempre tiene el bypass activo junto con el inversor

  • @herbertpalines4695
    @herbertpalines4695 10 місяців тому

    Hello! Will the inverter work even without a battery yet? I plan to tie it to the grid first since I don't have yet funds for the battery. Thank you!

  • @khomrattshop9575
    @khomrattshop9575 Рік тому

    Normally, if there is damage to your device How quickly can technicians analyze and solve problems for customers? *Refers to after-sale service

    • @yonghuisolar
      @yonghuisolar  Рік тому

      Hello, if the customer can provide accurate information, the cause of the failure can usually be determined quickly. However, if the cause of the failure is complex, it is necessary to simulate various possible failure situations.

    • @khomrattshop9575
      @khomrattshop9575 Рік тому

      If so We will experiment together... *** Don't care how long the trial lasts. Until the true cause is found After experimenting, success was found. and equipment that customers purchase and use Use it as a home decoration. Waiting for further treatment...indefinitely😊

  • @NaniKeita-r8d
    @NaniKeita-r8d Рік тому

    Super maintenant comment installer appareil kp55k3-ss

  • @BookPaLuy
    @BookPaLuy Рік тому

    can look system in apk ?

  • @willierice7153
    @willierice7153 10 місяців тому

    Why isn’t my system reading my 4 100watt solar panels?

    • @alejandrobetancourt339
      @alejandrobetancourt339 10 місяців тому

      Tienes que ponerlos en serie el voltaje tiene que estar por encima de 40V

  • @totogazebac3654
    @totogazebac3654 6 місяців тому

    srne brand and deye is better

  • @garrydust1701
    @garrydust1701 11 місяців тому +2

    My 3200 unit lasted 5 weeks , it burnt out , tried and tried to have a solution , 10 emails later , just totally crap , I lost good money , this company is crap

    • @ferdm9646
      @ferdm9646 4 місяці тому

      If you show them what happened to your inverter they'll send you a new motherboard. This is how it works and we have replaced several of them. They also have new and improved versions SMG ii models. Obviously you can't compare these with other high end inverters but from the price point they are fine. Cheers

    • @garrydust1701
      @garrydust1701 4 місяці тому

      @@ferdm9646 hi , I lost count how many emails I sent them , under the guarantee, they should have given me an address to return it to them for repair , it clearly states in the manual , if it is code 52 return to manufacturer , they just kept giving me excuse after excuse , 5 weeks it lasted , 400 euro out of pocket