Hi, could you pass the DL421 and DL411 information Dimensions: Width / Length Angle of curvature Drilling diameter Hammer Type: Down or Top Drilling Pressure Drilling axis height Drilling Ascending / Descending Reach of drilling
Hi, could you answer my questions? what type of rock bolting (length, passive or active) did you use in this case? did you have to adapt your drill rigs to execute this activity? thank you
Thats probably the worst meshing job I've seen in 30 years. Way too much overlap and the mesh isn't hard up against the rock. Next time get a Anzac to show you how its done🇦🇺
Top Julien, merci de partager ton expérience de ces fantastiques machines sous-terrain SANDVIK que l’on ne voit jamais en action! 😊
Looks like jumbo to me installing split sets
A very slow one at that.
@julien lessire estou atualmente fazendo esse trabalho, no Brazil, com uma técnica diferente, usando transpasse, sequenciamento de cavilhas
Biriyle deliyo biriyle çakıyo adam
Can you please share the type and details of RB and RB machine
Мы в России делаем так же но только вбиваем болты без вращения.
Hi, could you pass the DL421 and DL411 information
Dimensions: Width / Length
Angle of curvature
Drilling diameter
Hammer Type: Down or Top
Drilling Pressure
Drilling axis height
Drilling Ascending / Descending
Reach of drilling
Yo fortifico (sostenimiento) con un dd 321 con pernos spleset
En que mina hacen este tipo de fortificación esta interesante
Hi, could you answer my questions?
what type of rock bolting (length, passive or active) did you use in this case?
did you have to adapt your drill rigs to execute this activity?
thank you
The question makes no sense
The rock bolt installed were active called split set
Tem mais vídeos naon
No pasa nada con el operador se demora mucho mejor que me contraten ami persona
Jumbo görmeye gelmedik başkan
Hi
That’s a jumbo not a row bolter dummy
Что за болты? Не винта ? Не смолы?Это тувта полная!!!Что держит эта (крепь) ??? А градус какой? Все от фоноря !!!
6 тонн держит.
Какие 6 тонн? Наполнение шпура где???😱
СЗА называется хорошо держит у нас тоже самое только сетка краб
Thats probably the worst meshing job I've seen in 30 years.
Way too much overlap and the mesh isn't hard up against the rock. Next time get a Anzac to show you how its done🇦🇺
Not very neat.
Far out that was painful to watch both operator nipper and camera m an