I made my way to the Tri-Cities to watch the Columbia Cup for my Birthday and ✔️it off my bucket list. What a treat to see these amazing mini’s race around the course. I got some great video too!
You mention about building a boat over the winter, I take it you mean fully built, paint an all! Back when I raced for many many years in APBA and the pro division USTS most of the times an order fir a new boat goes in the year before, and your lucky enough for it to be done by next year, showing up to the 1st race of the year, you spend all day rigging it just to make it in the water before testing ends. No paint, just West, and an X on it for the season, so the ML kneeler I'm building as in true alky fashion has to run this summer with an X and West... lol
Grew up in RC Unlimited Circles in the NW. Really sad the see the lack of craftsmanship that once existed. Good to see David still has the Pack going.. About spit out my drink when I saw that.
The only bad thing on your clips Scott is that they end. Keep up the good work. Can you explain in more depth the actual measurements of the boats in the different classes and the names of the equipment people use like ESC and motor names
I have a factory set of the Miller u-1 decal sheet form a vintage kit that was half built and the other half missing sadly. Still want to build one. One day. But up here in MN we don't have any racing.
Man I have the U-1 Miss Budweiser 1/10 scale boat hanging on my wall and I am also looking into who built these hulls👍Mine has a Dynamite nitro from factory and hull plate number inside!
A couple guys tried gyros a while back, but the response just wasn't quick enough to do any good. Very few even have manually adjustable canards anymore now too. Just not needed once you find the right spot.
Hey Scott, As always great Vid. Have you thought about a Full cut from scratch (Your Planz) Large scale Gas build from start to Finnish?. Your current Videos are amazing, YEAS !.. But there is some gaps that I am sure some of newb's would benefit from 4 SURE.... DIVE DEEP MISS US or Pay n Pack
Killer videos! What is the club's top speed for a gasser and for nitro? I love the nitro days flying and I get it, but you cannot beat the instant torque and speed of electric. Whenever I see gasser boats running, they look slow. Tuned nitros look faster so Im curious what speeds you are running.
Boats in racing videos often appear to be going slow, mostly because they are! After about one lap the order is usually sorted and most everyone is just trying to survive to the end. When running balls-out (technical term) our nitros and gassers are pretty much identical in speed, with fast boats running in the mid 60's
@@M5PerfHydros Wow that is a lot faster than I thought and respectful. Now I see why they look like balsa airplanes after a minor crash, you guys are hauling ass. Now Im off to ML to decide on my winter project then. Hopefully you wont be hearing from me. Ill re-watch your videos before I build.
Loved seeing the KISW Miss rock boats. I was part of the crew for the 89’ season.
Nice to see it being represented 😊
Awesome!
I made my way to the Tri-Cities to watch the Columbia Cup for my Birthday and ✔️it off my bucket list. What a treat to see these amazing mini’s race around the course. I got some great video too!
Always luv the pit tours from the Rc Unlimiteds races Scott. Beautiful boats. Thanks for showing us. Take care and Stay Safe.
I'm on it!
What great videos, such a nice community you have over there
Scott mate best content on the net, love your work.
Thanks GR!
That was a pro boat RTR Miss Budweiser……I have had a few they came with nitro motors
You mention about building a boat over the winter, I take it you mean fully built, paint an all! Back when I raced for many many years in APBA and the pro division USTS most of the times an order fir a new boat goes in the year before, and your lucky enough for it to be done by next year, showing up to the 1st race of the year, you spend all day rigging it just to make it in the water before testing ends. No paint, just West, and an X on it for the season, so the ML kneeler I'm building as in true alky fashion has to run this summer with an X and West... lol
Keepin' it true to scale!
nice video 😎
Thanks!
Grew up in RC Unlimited Circles in the NW. Really sad the see the lack of craftsmanship that once existed. Good to see David still has the Pack going.. About spit out my drink when I saw that.
That red Budweiser boat is from Hydro & Marine.
Hi,you should do a series on building a boat in detail..
Good idea! Radio Control Racing Hydroplane Construction: ua-cam.com/play/PLN1BConcF3a2Ipiq0VOKo4lX-YX3W3b1i.html
What'up~ Like.amazing ~ all the best~ 5M,
Thanks!
The only bad thing on your clips Scott is that they end. Keep up the good work. Can you explain in more depth the actual measurements of the boats in the different classes and the names of the equipment people use like ESC and motor names
Sure! I'll do a deeper dive on some of the boats next time
Why does the boat's rudder have to be on the left side? Thanks.
Doesn't have to be, builder preference
@@guojangjaja.official5400
Perhaps for the linkage which works in traction in the curves and easier to install here to allow this way of acting ?
I always wondered why or if they make big glow plugs for gas engines. And run a gaser on nitro
Why not? It's not legal for most racing series, but I'm sure it could be done!
Nice Video ! The Miss budweiser looks like the
hydro marine T 4 twin Wing
I own a 1/10 T4 H&M and I can assure you it's not unfortunately.
I have a factory set of the Miller u-1 decal sheet form a vintage kit that was half built and the other half missing sadly. Still want to build one. One day. But up here in MN we don't have any racing.
Cool.... Build it!
I was going to drive down from Spokane for this race on Saturday but then I saw the temps and decided not to. Looks like a good turnout.
Hot hot hot!
Man I have the U-1 Miss Budweiser 1/10 scale boat hanging on my wall and I am also looking into who built these hulls👍Mine has a Dynamite nitro from factory and hull plate number inside!
Hydro & Marine. I have the T4 Twin wing 1/8
спасибо за обзор. еще бы показали как бегают эти модели. вот например в конце красная гидро подплывала как она ходит по воде ?
1996 oops
What you think of a 2996 prather pirahna .67 k n b inboard 11cc
What do I think? I think it would be super fun!
At. 24:24 I see a servo for the canard flap. They are manually controlled or they use gyros?
A couple guys tried gyros a while back, but the response just wasn't quick enough to do any good. Very few even have manually adjustable canards anymore now too. Just not needed once you find the right spot.
Hey Scott, As always great Vid. Have you thought about a Full cut from scratch (Your Planz) Large scale Gas build from start to Finnish?. Your current Videos are amazing, YEAS !.. But there is some gaps that I am sure some of newb's would benefit from 4 SURE.... DIVE DEEP MISS US or Pay n Pack
Most of it is right here! ua-cam.com/play/PLN1BConcF3a2Ipiq0VOKo4lX-YX3W3b1i.html
Who does the detailing of the mini drivers? I'd like to get one for myself...
Wife of one of the drivers, only for her friends unfortunately. Do it yourself... You can do it!
Killer videos! What is the club's top speed for a gasser and for nitro? I love the nitro days flying and I get it, but you cannot beat the instant torque and speed of electric. Whenever I see gasser boats running, they look slow. Tuned nitros look faster so Im curious what speeds you are running.
Boats in racing videos often appear to be going slow, mostly because they are! After about one lap the order is usually sorted and most everyone is just trying to survive to the end. When running balls-out (technical term) our nitros and gassers are pretty much identical in speed, with fast boats running in the mid 60's
@@M5PerfHydros Wow that is a lot faster than I thought and respectful. Now I see why they look like balsa airplanes after a minor crash, you guys are hauling ass. Now Im off to ML to decide on my winter project then. Hopefully you wont be hearing from me. Ill re-watch your videos before I build.
So you'll be changing your name to iboat65?
ρяσмσѕм