POWER TROWEL CONCRETE FLOOR | Building a new garage in my backyard | Part 14

The finished concrete floor has been poured, and after partial curing, it was time to float the floor. This is done with a power trowel machine that we operate by hand. You can see how we did this in this video!
Why did I choose a concrete floor? Because the disadvantages do not outweigh the advantages. Concrete floor is seamless, maintenance-free, very suitable for underfloor heating, strong, load-bearing, etc.
When freshly poured concrete has been finished in the right way by means of a straightedge or float, it will look reasonably flat. However, bumps and bumps will still appear during the curing process. When hardened, concrete is a rock-hard material that is not easily influenced. Concrete troweling must therefore be done before the concrete has completely hardened.
When can you start power troweling? The time to start power troweling is when it is walkable after several hours of curing and you are not leaving deep footprints. If you sink into the concrete, you are too early and if the concrete has already hardened, you are too late.
Power troweling a concrete floor is the method to create a spacious, sleek and smooth appearance.
Concrete troweling is done with a trowel machine. After the concrete pouring has been completed, the top layer of the poured concrete is first sanded open one or more times with a power trowel to create a cement layer. This is done by means of a floating disc under the power trowel machine. If, after a number of times floating, a nice cement paste layer has formed on the concrete floor, the floating disc can be removed and the real power troweling can begin.
When troweling, the blades that are under the trowel are used. These blades close the top layer, as it were. The blades under the trowel machine can be adjusted in such a way that they polish the top layer more and more with every treatment. Some time must be waited between each power trowel treatment to allow the concrete to harden.
In this video we explain step by step how we power troweled the concrete floor.
00:00 Introduction
00:08 Pouring concrete with a trailer pump
01:00 Determining the concrete pour height using a laser
01:25 Leveling the concrete floor
01:50 When to start power troweling?
02:10 Power trowel with floating disc
03:16 1st time power troweling
03:30 Adjust power trowel machine
04:33 2nd time power troweling the concrete floor
05:10 3rd time power troweling the concrete floor
05:40 Final result of the concrete power troweled floor
05:51 Post-treatment of concrete floor
You watched a video of Li'l Popeye. 💪
Did you like this video? Like the video. 👍
Don't want to miss a video of Li'l Popeye? Then subscribe to LilPopeye. 🔔
Question or remark? Leave a comment! 💬
On Lil Popeye's channel ( / lilpopeye ) new videos are regularly uploaded. 🆕

[@LilPopeye]

U hebt gekeken naar een video van Li'l Popeye. 💪
Vond u deze video leuk? Like de video. 👍
Wilt u geen video missen van Li'l Popeye? Abonneer dan op LilPopeye. 🔔
Vraag of opmerking? Laat een reactie achter! 💬

[@DavidStomph]

Om de hoeveel tijd vlinder je na de eerste keer? Uurtje?

[@LilPopeye]

Zoiets ja.

[@Fixitvincent81]

mooie video!

[@LilPopeye]

Dank u

[@8bunker]

super film toppy

[@LilPopeye]

Dank u