CB750 4 Into 1 Exhaust Install! Sounds Amazing!
Вставка
- Опубліковано 5 вер 2024
- CB750 4 Into 1 Exhaust Install! Sounds Amazing! In this video I remove the 4 into 2 system that was on the bike and install a used 4 into 1 using an unknown brand header. I modify the header exit to fit a short stainless cone muffler for the best combination of looks and sound per my liking. This bike is now simply perfect!
CycleX is where I bought the muffler but it appears I grabbed the last one! Sorry not sorry! Regardless here is a CycleX link as they provide a ton of great stuff anyway. www.cyclexchang...
Previous episode of the seat that I traded for! • The CB750 FINALLY gets...
If you found this video helpful or simply wish to support the channel further feel free to donate to the "Tip Jar" via the paypal link below! Anything is very much appreciated!
www.paypal.com...
Brick House Builds Amazon Storefront
www.amazon.com...
For updates on this project as well as others be sure to follow along on all the Brick House Builds social media platforms!
Instagram - / brickhousebuilds
Facebook - / brickhousebuilds
Website - www.brickhouse...
Tik Tok - / brickhousebuilds
#brickhousebuilds #cb750 #4into1exhaust
I hope you all like this one as I have wanted to get a 4 into 1 on this bike since day 1! I do plan to make a short version of this video with just sound clips for the masses so I'm aware this one may be lengthy for what is accomplished. As I know many will chime in saying "would be better with stock pipes" just remember that that is simply an opinion. You have them, I have them, everyone has them. That does not mean your opinion is a fact. Just remember this is all fun and we can all enjoy these things in our own way which is what it's all about.
well said :D
Really good work - It looks better, and sounds better too!!
Love it - had a CD175 with a 2 into 1 with reverse cone megaphone back in the day - what a sound
@@AidanH1 🤘🤘
Well said!! That’s the great thing about bikes….and cars…..making them your own! The downside to this build is that it makes me want a CB750 now. And then I’ll want a CBX again when you start working on that!! 😂. I only have a two-car garage man…and it already has two bikes in it!!!!!!
LOVE Honda CB750's, and love the patina you've preserved in this beautiful bike. Great film - terrific storytelling, well edited, well shot. LOVE IT - thanks very much!
Many thanks and happy you enjoyed!
You did a great job on the fabrication and it sounds deeper now, more aggressive. That’s a Yea from me 👍🏻 Oh, btw, you can weld 👊🏻
Thank ya Stew! I figured I'd show of a tiny bit of the fabrication I do since I hadn't shown any on this bike yet 😎
Yeah thats what I was thinking. Nice welds.
Why do they always sound so good, always fall in love with them😜😜 Could listen to them 24x7😄😄
Same lol
Mate, I'm not sure what's more pleasing to the eye. The bike or your skill.
Thank ya!
It’s been fun watching the progress on this bike. Very well done and clean work. Keep up the good work.
Glad ya like it thanks!
Sounds much sweeter with the 4-1 fitted. Bike is really starting to come together now, love what you're achieving with it. 😎.
Thank ya!
My $150.00 72 CB750 came with a very well used Kerker 4into1 exhaust. Did the same thing you did and painted the head pipes black and cleaned up the muffler. Had to replace the end cap. I clicked the like button after only about one minute of watching. You are correct they sound the best with a 4into1 exhaust.
Thanks Ken! I had a Kerker on a cb550 that sounded wicked!
I had a CB750 F Super Sport. Had 4 into 1 exhaust. Mine was like the old Doug Thorley tri-y set up. 4 into 2 then 2 into 1. What a screamer!
Nice!
I’m partial to the original exhaust though I love the sound of the 4-into-1. And it’s always a pleasure watching you improvise. Great work.
Definitely nothing wrong withe the stock exhaust its all personal preference. Since I fell in love with cb750s in modified form first thats the look burned into my head
@@BrickHouseBuilds That 4 in 1 does indeed sound pretty good. Also: nicely done with getting it to fit.
Didn't the CB750 came with a 4-in-4 from factory? Or does my memory fail me here?
@@Vulcanier65 Yes the K models had giant 4/4 pipes. They are worth way too much money lol
Man, that thing sounded killer with the open header!
It was SOOOO much louder off camera. Like painful lol
@@BrickHouseBuilds yeah, I wish there was a way to get that sound, but quieter. No such thing as a free lunch though.
Workmanship is excellent while keeping the patina of the bike! Great job and video! Thanks man!
Glad you like them Mark!
Beautiful "custom" exhaust!!! Love it!!! Takes me back to the 70's when a cool exhaust had to be built. Yours looks really nice!!! Really nice!!!!!!
With that back pipe on it will sound even better I had a C B 750 with a Collins 836 stroker kit and cams Hooker headers and it sounded like an offenhauser Indy engine
Cool Job . nice sound .. Notice your fins were broken. We used to file the head corners off at 45 deg. (Black head with filed fin edges )
Yeah a few broken ones but it adds character. I'll weld them like factory if I ever rebuild this thing.
I’m looking for the old vintage four into four like the six into six cbx ❤ love that quad exhaust look. I have one on my single Grom LoL 😅
Nothing beats that old school 4 into 1 sound! Takes me to "back in the day". Thanks for posting🏁
Glad you liked it!
That blue with the stock decals makes it the best looking CB750 out there. I always wanted a Candy Gold k0 or k1 like the one my brother used to take me for rides on when I was 3. I recently bought a '73 in Maxim Brown Metallic and I'm not fond if the colour. I considered painting it Candy Gold, Flake Sunrise Orange or the Candy Red that came later, but this Blue is the one! I plan to just mask out the graphics even though they're not perfect, paint the blue, then clearcoat the whole thing. Cheers!
The brown is OK but my favorite is the orange or green. Make it yours!
The exhaust sounds absolutely perfect, so I'm doing the same to my '76, also I like that you acknowledge new comments. Great skills and I have learned from these videos, Sensei.
Well thank ya much! I do my best to interact with everyone as I appreciate them taking the time to watch my videos.
An upgrade that does not detract from the look. In fact, it adds extra 'cool' and of course, a wicked sound. Top workmanship as always. Keep up the great work man!
Thank ya Mike!
🦅CB750 FOUR HONDA UMA OBRA DE ARTE EM FORMA DE MOTO 🇧🇷✝️🌎🤠
The 60's Luanda when the Japanese started to invade the market. The first was the cb 350 soon after the CB 750 four appeared it was total madness the 4 collectors in a short pipe it was chilling I remember well I was a kid I loved hearing the sound. Wonderful time. thanks for bringing those moments back..
Glad to do so!
I know nothing about bikes but i always wished for buying one of these older models,i find them pure and real. beautiful bike and video!
Glad you enjoyed!
Yes, the sound now is better. But I like more the symetry with 4/2 or 4/4.
I've always been on the other side of the fence there with preferring minimalist looks.
That exhaust wakes that bike UP! Sounds great! I love how you love this bike!
Its almost perfect! I do very much love this thing
Nice, nice! Remember my beautiful but open Kerker on my old CB900F with fondness and a little pain. I had to fabricate an internal baffle with many holes to cut the noise down.
Those dohc bike have a sharp pitch at certain rpms that just beats the ears
Sounds fantastic, love the fabrication, quality Tig welding. Keep the videos coming.
Thank you Paul! If you like seeing fabrication check out my recent skid plate video!
I think even your bike would hit the like button if it could. That's a sweet sounding Honda you've got there, such a fabulous machine gracing the roads once more. Great work, thanks for the video.
hahahaha thank ya! I'm sure it would! it's life is much more exciting now vs its time spent in the barn
Hi there, am here again because I like what you do, and now I just found a 76'750F and it was running as of last year, but it now has some problems, and I hope am not to old and forgotten on what I used to know, so I will be checking you as much as possible... I commented on one your video and you answered, kool... I will be trying to work on it but one problem is I now don't have a garage... so i will see what I can and can't do... thanks for your channel... ps, I might be wanting to ask a question or two if possible... ok
No worries. Ill do my best to answer should you have some.
I owned a 1973 Honda 350 CL and installed a 2 into 1 Jardine chrome header and muffler. The header/muffler wasn't one piece. I welded the muffler to one of the header pipes. The other header I did not attach because I could removed the header without taking the whole assembly off when I wanted to change the oil. Also, had to make a bracket to attach the muffler to the swinger arm. Also, I went up one size on the main jets. That was it. Ran and sounded fine.
350s and 360s sound really good with a 2 into 1
Nice TIG welds.
Thank ya
Sheeesh that shorty bullet pipe sounds *chef's kiss* I must say the bike sounded more "muscle-y"
This is the first time ive used this cheaper muffler but the Cone Engineering brand units I always use sound amazing on anything I use them on. These were bound to be similar.
Your metalworking skills are impressive. Love the end result.
Very much appreciate it! 🤘🤘
Yeah, that exhaust does sound super good. Nice mechanical sound.
Shades of 1980 had that bike back then when I was 15 wanted the four in the one Kerker header so bad, but couldn’t afford the 300 bucks 😂
Your welding is beautiful
Thank you!
Love watching your progress on this bike, i rode that model around New Zealand back in early 90s for 8 weeks and enjoyed every moment, keep up the great work, you are a genius, love your channel😎👍🏻
Many thanks! Lets not push that genius thing as I have some very dumb moments lol
Nice job. For me, it is the 4 into 2 every time tho! just a preference. Your bike ,your choice, thanks for sharing.
I definitely liked the 4/2 and it could have stayed forever but when the deal comes!
0:15 was hilarious haha
😉
I had a RC engineering 4 into1 header on my Z1 900 Kaw that got me stopped by two different Cops in one hour! I guess i should of installed the baffle! 4 into 1 headers are the best for horsepower & sound.
It could be a seat of the pants placebo effect but I felt every aspect of how the engine runs to be smoother after the exhaust change. Shifting, on/off throttle, power, idle, just everything.
A group of us riding with 4 into 1 pipes was spine tingling. Nice job and way better sound.
I appreciate it Richie
I used to ride past a section of concrete wall on my way to work. I loved listening to the bike as I rode thru there. sometimes, I would even pull the clutch and give the throttle a couple blips. Same with underpasses.
I think they both sounded good but those "pea shooters" just looked a little too "Jetsons" for my taste. If they sounded like the bike did with open exhaust ports, that would have completed the audio visual experience.
Another amazing video from Brick House Builds. Making art from something old. Wow.
I like 4 into 1 with the spark arrester
Great job.
That exhaust strikes the perfect note.
Thank ya!
I had a 74 750 I put a winning 4 in one header on it. Sounded great
Definitely nothing else sounds like a soch 750 with a 4 into 1
Think I preferred both the sound and look before haha but thats the point of building bikes, each man to his own
And nothing wrong with that we can enjoy these our own way
Love the 'that's about right' geometry measurements! I never get bored of your vids dude, so pleased I found your channel. I can watch these vids for hours and not even in order... So far iv affixed a new subframe but can't afford any argon so still using flux core, what a mess! But I'll go over it at 120amps later lol... Just done the rear tank mount and about to start on the front, using a China cg125 tank so measurements are useless it's all by eye. I watch your tig welding so closely, one day I'll do another bike and will strive to match your quality 👌🏼 Thank you for the vids man. Your absolutely inspiring some of us.
Well thanks so much that means a lot! Glad you are inspired to build skills on the welding side. I was teaching a friend to weld today!
@@BrickHouseBuilds you know you've mastered something when your teaching someone else, and good on ya for paying the skills forward too.
I really love that bike
Same here!
But is so hard to find the kind of bike here in the philippines and so expensive!😢😢😢 that's one of my dream bike, good job
Club CB750
That noise brings back memories. I had a cbx with a 6/1
a CBX with a 6/1 is THE BEST sound
Love the sound of CB750 engine
Nothing like it!
And I wish they still made that bike and that motor
Great job! I never learned to weld and sorry I did not. You are really good at it. The new pipes and muffler sound great.
Much appreciated! I weld often and it takes a lot of practice to say the least
Most exciting youtube title of the day! Just about to watch.
🤘🤘
Sounds so much better
Just smooth and snappy!
Recently found your channel and have watched all the CB750 videos. Can I say you have done the right thing with the bike? The important stuff is sorted, the bike runs, goes and stops. 10/10 on the exhaust sir! Looks and sounds great! Age related patina means you don’t get precious about using the bike for what Honda intended. Top marks for a job well done!
Well I'm glad you found the channel and have been enjoying the videos! Much appreciated and I absolutely plan to put a ton of miles on this old girl!
Dunstall decibel exhausts back in the day sounded awesome . They used to do lots of beefy bass mufflers .
👍
This CB 750 K is getting cooler every day. It's been my dream since always, too bad that here in Brazil they are rare and too expensive.With 4 x 1 it was a show!!!!
Definitely a lot of bikes being exported from here
Because there are no balance tubes you can get the balance with a four in to one. And closing it down will help the bike run cleaner. Great choices. I also like how you play the best notes against the sound wall of the loading dock.
Im going to probably make an update video on carb sync and tuning as that will be cool to see. Glad you liked the soundtrack 😎
Looks like a Kerker header, very popular back in the day. Great job on the old CB
Thanks Steve, could be indees
Nice work. Love Hondas. Keep the great videos coming.
Thank ya!
Good thinking on the junction size. Since 4 cyl 4 stroke, there is ever only one power stroke at a time. That means the output pipe size needs be no larger than one of the header pipes. Further, that 4 into 2 was not proper engineering. Since firing order is 1243, the correct way is to pair 1 and 4 in one muffler and 2 and 3 in the other.
👍
Dream bike for sure
I'm having a high school flash back. Most guys could only afford a CB350 back then though.
Hey those were great bikes though
Top Notch welding skills!!!!
I see you got the exchange! I mean about the seat!
man bike sounds amazing coming around that turn at the end!!!!!!
I definitely love it this way
What a beauty. I am now looking for a project bike. They are hard to find. An 80's CB or a mid 90's CBR would be awesome. I love the exhaust setup too bad you got the last muffler.
Check out cone engineering as they have better quality ones
Love that 4-1 sound..back in the day those pipes were the go to performance mod with k&n filters or even the old mesh covered alloy bell mouth carb intakes which usually needed the needle height lifting. The sound with 4-2 is great..but that 4-1 sounds mint. 🇬🇧
I still need to tune the carbs but it shouldn't take much. I'm happy where it's at
Nice set up
Sound is amazing
Thank ya!
Awesome job and sensational welding skills
Thank you much!
Hell yeah, man! I just swapped 4into2 into 4into1 on my KZ650
Looks and sounds great. You gotta be happy. Well done. Can't wait for the weather to pick up here in Victoria, Australia.
Thank ya much. Definitely one of those simple things I wanted on the bike
🦅4X1 ANIMAL RONCO ANIMAL CB750 FOUR MARAVILHOSA 🇧🇷✝️🌎🤠
Well fabricated job on this tig welding is first class could listen to it all day sounds amazing awesome job mate 👍👌❤️🏁🏁
Thank you again Peter!
@@BrickHouseBuilds sorry for all the comments going through all your content lol amazing mate your skill is spot on 👍
@@peteraitken6494 absolutely no issue. I appreciate the comments for real
I’m looking for a cb750 sooooo this is research for me =] ❤
Sounds like she's got a bit of an air leek on the inlet mate 👍🍻
Why do you say that?
Awesome Job. Thanks for sharing
Thank you for watching!
Wow, it sounds great!
Thank ya!
I love how you're enjoying your 750. I love mine too.
I needed this bike at this time and I'm glad my joy comes through with it!
Oh yes! The original Mad Max sound is there! I used to drag race my 77 KZ1000 with just the open header. For street I had the MAC muffler the header came with. I always wanted something in between. My turbo bike will have no muffler as it was before but without the crazy bends.
I have a 76 Honda 750F with a Wisco 915 big bore kit, 4into1 Hooker, Streetcam 29mm carbs and she sounds like mean angles to me. 130hp at rear tire.
The turbo is the proper muffler!
🤘🤘 thats legit
I will comment again, on top of your skill, I absolutely love the way you produce these vids. Wishing you generating so much views and comments that you don't have time to read them anymore.
Well thank you again!
Apart from the great sound it looks better allowing you to see more of the rear wheel / swinging arm etc.
Agreed, I tend to prefer a minimalist look
Great video, lovin the channel.
A collector 4 to1 is the answer for in line 4, no matter the make! Power, sound and personality. Love IT!
Brings me back to 1984, being 20 yrs old, in A&P school and mounting up on my 1975 Z-1 Kawasaki, Yoshimura 4-1, Road race pipe. Like to have that bike back.
Great welding hoss, nice!
Agreed! A 4/1 just sounds right to me but nothing wrong with stock either. Many thanks on the welding comment
Very awesome sound
Agreed!
Oh yeah definitely like the after, sound like a modern bike in my opinion. And it sounds like my old cb750f from back in the day, I miss that bike thanks for taking me back in time and ride safe.
What a sweet sound as the engine is start to moving !!
That it is!
I've restored a 78cb 750 very close to stock . 4 n21 is awesome . 5k to 7 8 k . Just howls . Not cbx but , lil bro fits
Agreed! They howl up top like you say!
Very nice. Sounds great.
Many thanks Alphonse!
Thanks for sharing. Love it
Glad you enjoyed!
Hi BJ, love the vid showing how much care you took, fantastic work. Sounds great. Would have sounded better with a brown seat. 🤣
Thank you
Bike is looking very good and that exhaust looks absolutely awesome. Now that sound.. is soooooo perfect🤤 Dude really, you’re killing it!👏
Thank ya! Arguably a touch loud at idle for me but I love it all else in the range
🦅 QUE RONCO INCONFUNDÍVEL, MELHOR RONCO DA HISTÓRIA DE UMA MOTO CB750 FOUR , A LEGÍTIMA SETE GALO , LINDA E INCONFUNDÍVEL, QUE ÉPOCA MARAVILHOSA 🇧🇷✝️🌎🤠
Reason why honda made it a factory option for the Supersport
Watched the intro...shhhwing!
Was worried it was too long but I thought it was fun so went with it
My personal opinion on patina is … once upon a time a good salesman convinced a impressionable person that corrosion oxidation scratches and all other forms of Entropy is as valuable as new. In my humble opinion one should do there best to maintain or restore a designer’s creation to his or her original vision for there creation or artwork and it is also ok to put your own artistic or mechanical improvements within reason and faithful to the design family (don’t turn a sport bike into a chopper)
You said this on another video
Much better sound now and the aesthetics are better too. 👏👏👏
I appreciate it, I think so too
Worse sound and worse looks. Good job!
Your cutting on the header reminded me of the Supertrapp I put on my CB700 Nighthawk S. (You probably saw it last year at one of the 4 Hands VBNs. It was the red and black one) Anyway, the only header I could find for it was an NOS Mac 4-into-1megaphone, but the baffle was awful, so I cut it off, notched the collector, had it ceramic coated, then cut the inlet pipe down on my my Supertrapp muffler and inserted it INSIDE the Mac collector and clamped it that way. I'm sure the flow wasn't the best, but it worked! 🤣
Hey if it works!
I did 4 into 1 on my cb750 and love it every second. I know you will too!
Oh its a definite
@@BrickHouseBuilds now time to ditch the air box? Really go minimalist. I can remove carbs in 5 min instead of 45.
Oh these are the easiest airboxes to remove. Two wing nuts on the bottom and just two bolts on top. Carbs off in 8 minutes no problem.
That great bike just got greater, really nice job on that exhaust and a good seat now as well, totally jealous, look after it mate 👍👍👍👍👍👍👍👍👍👍👍👍👍
Thank ya! She's pampered now
Just about perfect now!
Ooh man that's a spicy wee exhaust! Love it. Your welding is looking first class too - 💪🏻👌🏻🙌🏻
Many thanks Euan!