Stary człowiek to tylko przyjaciel, z którym razem chodziliśmy na kapitana. Wiele lat temu. Moja żona nazywa go tatusiem, żeby go tylko zdenerwować. Byłby szczęśliwy, gdyby wiedział, że mogę nazywać go tatą. Naprawdę jest tylko osiem lat starszy ode mnie. Chyba nie pokazuję swojego wieku tak jak on. Dzięki za komentarz. Bądź bezpieczny.
@@OmFishing oooooo😮😮 naprawdę jest pan tylko 8 lat młodszy, to szacunek nie widać po panu . A tak na marginesie to nie mogę doczekać się następnego filmiku Pozdrawiam serdecznie 👍 Sebek
Did you find that the tiller moved back a lot or is it manageable. Just bought the same model and I”m a bit nervous about how far back the throttle will end up. Regardless, she’s going on. Our 25hp is just to darned heavy to deal with by hand.
Did you pick up any top speed with the jack plate and tilt and trim.Also where did you buy that setup I'd like to find one for when i fish in shallow water
Brother what can I say, did you open her up all the way? She was running good, maybe next time you can check her speed, something like around 30 to 35 mph? Great video take care and stay safe. Fix your trailer. I'll give you a call later this week ok.
Had a problem yesterday. Engine was running trimmed full down. Trimmed up an inch or 2 and the motor stalled(a few seconds after). After troubleshooting the fuel(indeed getting gas all the way to the bowl). I replayed the stall in my head and we trimmed back down. Started right up. Ran fine for the rest of the fishing trip. Minus some stalling while creeping it up to the dock. Any ideas?
On the cheap camera I had two bungie cords holding it to the boat. The tripod on shore was just waiting for a big wake to knock it down in the water. Then I needed two bungie cords and I took them off just in time for a large boat went by. I had to run to save the camera before the wake hit shore. I just cut out the parts that I did not think anybody care about. I just cut out the dumb stuff. LOL
Hello sir, I baught a Honda 5hp motor and I don’t know the year and I’ve tried really hard to figure it out but I can’t. The number is BADL-1202927. Please help
I'm from California, San Diego. I have traveled all over the USA and never saw any inhabited place as beautiful as was shown here.
Wow!!! There is a guy there parked that looks exactly like your truck and home... 6:54 .. Small world. Lol. Love and blessings from Ontario Canada!
Oh wow! Thank you for watching and commenting. Stay Safe.
We got a lot in common. Get one thing fixed, something else breaks. Lol
Enjoy the videos!👍
The joys of boating. Thanks for watching and commenting.
You sure live in a beautiful place. It's always something with boats and trailers.LOL...
God work
Thanks for the video
Micke from Sweden
Thanks for commenting and as always keep watching.
Fajowa łudeczka i ładne widoczki. rybki można łapać 😀😀,a ten starszy pan to domyślam się że to pański Ojciec
Fajny film pozdrawiam Sebek
Stary człowiek to tylko przyjaciel, z którym razem chodziliśmy na kapitana. Wiele lat temu. Moja żona nazywa go tatusiem, żeby go tylko zdenerwować. Byłby szczęśliwy, gdyby wiedział, że mogę nazywać go tatą. Naprawdę jest tylko osiem lat starszy ode mnie. Chyba nie pokazuję swojego wieku tak jak on. Dzięki za komentarz. Bądź bezpieczny.
@@OmFishing oooooo😮😮 naprawdę jest pan tylko 8 lat młodszy, to szacunek nie widać po panu . A tak na marginesie to nie mogę doczekać się następnego filmiku Pozdrawiam serdecznie 👍 Sebek
Did you find that the tiller moved back a lot or is it manageable. Just bought the same model and I”m a bit nervous about how far back the throttle will end up. Regardless, she’s going on. Our 25hp is just to darned heavy to deal with by hand.
I agree to darn heavy. My motor worked just fine the tiller handle was a little higher but I like it better. I think you will like it.
Did you pick up any top speed with the jack plate and tilt and trim.Also where did you buy that setup I'd like to find one for when i fish in shallow water
I was lucky enough to have one give to me. Check out my amazon page.
@@OmFishing yeah free is always good.And ok ok i will check it out
Looks good!
Thanks and as always thanks for watching and commenting.
I have a 96 30 hp Johnson on a 1448 john boat What prop pitch do you recommend ?
I am running a 10/15 stainless steel prop on my Evinrude 30hp on my jon boat. It has worked well for me.
Where did the Bimini top come from I’d like one
I bought that one from sailrite.com Sorry I took so long to answer.
What are you going to do with the jack plate?
Not sure. The jack plate would have worked better. The tilt and trim is nice. Thanks brother Harvey. PS If you need it I will send it to you.
Brother what can I say, did you open her up all the way? She was running good, maybe next time you can check her speed, something like around 30 to 35 mph? Great video take care and stay safe. Fix your trailer. I'll give you a call later this week ok.
Ok Thanks Brother.
Had a problem yesterday. Engine was running trimmed full down. Trimmed up an inch or 2 and the motor stalled(a few seconds after). After troubleshooting the fuel(indeed getting gas all the way to the bowl). I replayed the stall in my head and we trimmed back down. Started right up. Ran fine for the rest of the fishing trip. Minus some stalling while creeping it up to the dock. Any ideas?
The float
I'm curious to why this and not Yamaha trim?
The tilt and trim was given to me for free. The yamaha trim would have been what I would have used if I were buying it.
Say hello to Captain Mitchell for me.
I will he was nice enough to let me use the ramp in his yard so I could video. If I had that in my back yard I would never be home.
cant get right
I took it back home and adjusted the engine height and I am going to test it out to see if it is any better.
unloading from the trailer i would've knocked the tripod into the water, then crashed the boat while attempting to recover said camera
On the cheap camera I had two bungie cords holding it to the boat. The tripod on shore was just waiting for a big wake to knock it down in the water. Then I needed two bungie cords and I took them off just in time for a large boat went by. I had to run to save the camera before the wake hit shore. I just cut out the parts that I did not think anybody care about. I just cut out the dumb stuff. LOL
Hello sir, I baught a Honda 5hp motor and I don’t know the year and I’ve tried really hard to figure it out but I can’t. The number is BADL-1202927. Please help
That motor is a BB5AM LA 1997
lol