08 - How to Build a Cordless Drill Shelf and Charging Station to hang on french cleats
Вставка
- Опубліковано 17 лют 2017
- GET Detailed 3D PLANS here:
kingsfinewoodworking.com/prod...
This is a build form baltic birch plywood. It is to hold all of my cordless drills, impact drivers, and impact wrenches. I have quite a DeWalt collection built up and I need someplace to store it all conveniently.
I also built it to hold all of the screws that I use most frequently.
It will mount with a french cleat system on the wall of my woodworking shop.
Things we used in this project:
Tools:
Grizzly Cabinet Table Saw - amzn.to/3wXwzo1
Empire Framing Square - amzn.to/3XRfnvX
Dewalt Circular Saw, Tool Only - amzn.to/3DplHTx
DEWALT Bar Clamp - amzn.to/3Rgtzgd
Dewalt 12" Sliding Miter Saw - amzn.to/3XV6odH
Bessey 24" Parallel Clamp - amzn.to/3XOyl6u
Dewalt Power Tool Combo Kit with 2 Batteries and Charger - amzn.to/3johJUr
Countersink Drill Bit Set - amzn.to/3ji170C
Woodpeckers Precision Woodworking 851 Square 8-inch x 5-inch - amzn.to/401kV9k
Kreg Pocket-Hole - amzn.to/3RAgsGR
Wood Glue Dispenser - amzn.to/3D94pKz
Microjig Grr-Ripper Table Saw Pushblock - amzn.to/3XQ7I1y
Dewalt 30' Tape Measure - amzn.to/3RM7W7L
Grizzly Drill Press - amzn.to/3jki7n6
Best Carbide Forstner drill bits - amzn.to/2zdGZ3e
Grizzly Bandsaw - amzn.to/3XUUobR
Materials:
Deck Screws 1-5/8" - amzn.to/3Y9ITxk
Titebond III Glue - amzn.to/3wvDDIh
Kreg Pocket Screws 1-1/4" - amzn.to/3YeWq6v
As an Amazon Associate I earn from qualifying purchases.
Link to the KFW Community Woodworking group. Share pictures of your work & get help if needed. Join our Community Page. Woodworkers helping other woodworkers. Share advice, get project ideas. Free tips. Insider information. Get the best deals on lumber & tools: / kingsfinewoodworkingco...
Help support us through Patreon: / kingsfinewoodworking
Purchase plans on our website: kingsfinewoodworking.com/coll...
Please like and share our videos. Thank You!
We love teaching the world to do woodworking. - Навчання та стиль
Share pictures of your work & get help if needed. Join our King’s Fine Woodworking Community Page.
Woodworkers helping other woodworkers. Share advice, get project ideas. Free tips. Insider information. Get the best deals on lumber & tools.
m.facebook.com/groups/134828903893994
King's Fine Woodworking Hi, Really like the drill shelf! Can you please share your plans with me?
How come you have no guard on table saw
Dpz
Love that your kid is helping you. She rocks!
Great build, easy to follow instructions. Definitely something I can add to my shop. Thank you.
Awesome. Thanks for watching.
Well done 👍🏽 job. Love how your daughter is your helper.
You have an Amazing wood shop & Setup !!!! So glad to see your Daughters enthusiasm to Help along in the Shop
I’m really enjoying this channel. I like how your family comes together in the shop. Looks like a great time! You also do great work and provide helpful tips!
Just recently came across your channel while looking for this type of cabinet for my small shop. Thank you for the idea and the way you walk through the project without all of the added nonsense. You are a true craftsman my friend.
Beautiful piece of cabinetry! And great father daughter bonding time, these are the moments she’ll remember as an adult and share with her children.
Fine job, and your daughter is a trip, cudos to you for involving her in your work!!!
I will start on mine today. Thanks for taking the time to document the process
Awesome! Thanks for watching!
Something about watching a good woodworking craftsman is very satisfying. I enjoyed your videos. Very nice work.
I don't often comment, but awesome job on the project. Thought I was the only one who overbuilt stuff to last forever. You got a new sub
Very cool to see you included your daughter! She’ll always have good memories of working with Dad!
My favorite .. :)) much needed home for my drills.. TY
Thanks for sharing your skills with patience and clarity, I will do a cabinet for my drills and accessories, Thanks you guys,
I myself have found what I want to do when I grow up. Your videos are a tremendous library . Very nice to see your family involved. By the way I'm 65 and it's never to late.
Thanks for the vid. I will be making one of these shelfs, great descriptions.
I KNEW you were a CABINET MAKER within the first few minutes !! EXCELLENT work !! I bet you build some BEAUTIFUL cabinets ! Thanks for sharing your knowledge with us !! Your Daughter is a Doll and is no doubt a GREAT asset to your business. Thanks again, stay safe and take care !!
Nice build. I just put up a clear wall in the garage, and am considering replacing the pegboard in the basement shop with one too.. I will be basing a drill/driver cabinet off your ideas. Having 3 different battery systems will require some modifications, but your ideas are solid. Thanks for posting them.
Great job on the quality build and video. I have watched this and all 4 videos of your miter station, and have really enjoyed your videos along with seeing your daughter'senthusiasm to help! ☺ Keep up the great work!!!
Hi Jordon! Thank you!
I'm really glad I found your channel. You do good work with limited bs with great craftsmanship.
Thank you for such a nice comment.
Ditto... lol (seriously)
Hi Scott! Thank you for watching!
Amazing work! I’ve started to follow your channel very recently and it’s all amazing. Great guidance for a beginner like myself. I got myself into a big project building a wooden airplane flight deck for a simulator, your ideas and lessons on how to use tools have been great help already! Thanks!
I recently found your channel and just clicked subscribe. It is indeed a pleasure to watch you work as you are a true craftsman of your trade. The video format is wonderful; please do not change a thing. You show enough but not too much and thank God for no annoying music to take away from the content. Those things plus the fact that you include your family in your work. I'm sure she is a great helper but, as a dad, I know that's not why you do it. Your daughter will look back at these after you have left here and the memories she has of working with her dad in your shop will forever remain priceless.
I WILL HAVE TO GIVE THESE PLANS TO MY HANDY MAN TO MAKE. THANK YOU FOR THIS GREAT VIEDO. YOU DID A GREAT JOB AND IT LOOKS VERY NICE AND VERY STURDY.I REALLY LIKE THIS SHELF!!!
Hi! Thanks very much! There is a link to the plans in the description if you like.
Thank You! Thank You! Thank You! While we've been friends for a while, and I've always admired your work, I've recently (made the time and) started binge watching your videos. I'm in a (4 year) process of moving, building a new large shop(and house), and designing and organizing it. (In the planning stages now). Your design of the charging station is not only common sensical when it comes to accommodating everything I need (drill-wise etc), but it is the first design that I find attractive, practical and the perfect fit for my new shop. Thanks again James. My fan level of you and your channel just went up a few notches!
Thank you Javi that is very kind!
Just like always... great build! Sure glad I found your channel! 👍🏻 Thanks for sharing James!
Hi Bill! That is very kind! Thank you.
Way to go Dad, include your daughter in the process. I'm a girl and I find building things way more fun than crafts...boring! She will be way ahead of the game when on her own thanks to her Dad. I worked on airplanes as a young girl beside my father and now in my retirement am having blast learning wood working. Having no fear of tools, these type of project are right up my alley and helping me to organize my shop. Thanks so much!
Nice job. I like the design and I especially like seeing the kids get involved.
Thank you!!
Slave labour dontcha know! ;-)
Hello James:
I have been watching you for years and love seeing the girls in the shop. I just watch the drill station video and think I will make my the same way. I will need to change some measurements but I love the inclusion of the big containers of screws. Nice job and no pretense to make it anything except a shop jig. I like that
G'day from Australia,
I'd like to reiterate some previous comments,
I am very pleased with the quality of your video and woodworking. I have subscribed to your channel and will be watching a bunch of your videos
Hi David! Thank you!!
Enjoyable to watch and listen to! best part is your not sponsored by some big tool brand trying to push these large expensive tools down my throat. you use tools that anyone could easily get their hands on and that are reasonably affordable!
Thank you!!
You are my new favorite woodworking channel!
Great tools solution storage, very inspiring!
Well done Sir. Thanks for sharing your expertise.
Love this build!
love this guy, talk about overkill
Well done!
Excellent build sir. I have a small one car garage that I am turning into my workshop and after lining all the walls and ceiling my first job will be to make this style of cabinet, I will add one difference though, locking doors for added security.
Tone Knight, thank you. I'm sure you'll enjoy it. The Charging Station was a fun build.
Been looking for a storage cabinet for a long time, but all the ones I have seen leave a lot to be desired, in my book. Thank you for this video. I happen to have a couple of 4x8 sheets of Baltic Birch that will become as close to your cabinet as I can get them.
That looks really handy nice job
Great tolls storage solution!
Definitely one of the better videos on UA-cam thanks Aaron plus you have one new subscriber !!
Hi! Such a kind thing to say! Thank you very much.
I can’t believe I just found your videos! Excellent project. I would love some detailed plans. Very well presented.
Very nice! exactly like what I am needing myself for my workshop! Thanks!!
Awesome, thank you for watching.
Great video and project. You have a tremendous shop.
like that center drill jig.
Great work mate. Very happy I found your channel
Hi Craig! Thank you!
cool seeing your kid help
Great work!
Really neat idea. Something that nice deserves some paint!
I think I'll be making my own shortly...Nice work.
Hi Ed. Thank you!
Nice job. Now I need one
Perfect. Now you must make it. :-)
You do beautiful work! There's enough fasteners it should survive a cat 5 hurricane!
Haha! Thank you very much.
After a LOT of hunting I found little plywood supplier in Goshen IN with Baltic birch (they call it Russian birch) for $27 5'x5' 18mm (around 3/4"), excellent stuff! Well worth the 1 .5 hour drive for me. Just wanted to brag a bit.
I'm guessing you have a background in building bomb shelters:-) Nice build as always and keep spending time with your family you all work well together.
Haha. Thank you!
Excellent build!
Thank you.
I've watched this videos a few times now and it's still interesting. I enjoy your other ideas and videos too. I especially like when you say, "the glue God's would be happy." Ha ha!
Very good job👍👌
Love it...
Hey nice build and video. Great to see you have your child involved.
Thank you!
Great build! First time watching your channel. I found you because I have been looking for the right cordless drill/charger cabinet. I haven't been happy with the ones I've come across until I saw yours. Thanks for sharing. I just subscribed to your channel.
Thank you! And thanks for subscribing.
Very good. Really enjoyed watching that.
Thank you!
Just watching this video. Awesome project i need to me make one now.
Yes, you should. :-)
Great organization..love it
Thank you!
I invite you to join our Kings Fine Woodworking Community facebook.com/groups/KingsFineWoodworkingCommunity/
Get help on your projects. Share pictures of your work in our gallery. Get advice from master woodworkers, and more. Learn new tricks, tips and techniques.
Nicely done
Thank you!
I really like it
Beautiful 👍
Good craftsmanship , good tome of voice. Good instructions. I'll listen the more
Eric Brouillette, thank you!
King's Fine Woodworking
I agree.... :-) Thanks, James.
Great Work and explanation
Thank you!
That looks awesome! Very nice video.
Thank you!
Good evening, I am very pleased with the quality of your video, and woodworking. I have subscribed to your channel and will be watching a bunch of your videos tonight, if you continue your hard work your channel will evolve I am very sure of it. Thank you for your time.
Thank you very much. I will certainly continue working hard.
Nice build. Doing something similar some time or other myself. Soon as I figure out where I want it.
This is badass built for me. I'm just a beginner. I need hands-on to build this
I built a subwoofer box out of 3/4" MDF. I used Liquid Nails in all of the corners and it made the box super strong. It was so strong that I couldn't break the box apart with a hammer, even with all of the screws removed.
fantastic !!
Just found this! Amazing to see how far the shop has evolved. Also, i see the early evolution of the photobomber.... I had no idea that you have gone through at least three different miter saws.
Haha. It’s so different today than the last video too. But we do have 3 new vids that are almost done filming, so you can see a new evolution too. And also, I’m thinking I should do a shop tour soon. We are currently getting a complete new dust collection and air filtration system installed.
@@KingsFineWoodworking I will be watching!
I love the design. Your charger shelf is tilted at angle, which makes a little cavity behind it. I think the design might be further enhances to put another board level at the bottom of the charger shelf and then drill a hole through the charger shelf and side so all the excess cord could be place in the cavity. You could then mound a power strip on the outside of the cabinet. Thanks for your great channel!
James great build as always I got to say this is the first buil that you haven’t used a gallon of glue on lol
You have a very soothing voice
Thank you
WOW, you have a lot of drills
NICE JOB....THANK YOU !!!!
very cool & well buit
I love how you make it a family affair........Awesome.
Beautiful! Happy Thanksgiving!
Thank you!. Happy Thanksgiving to you too.
Very Heavy Built Shelf Very Nice!!!
Thank You!
I will be getting those plans.
very nice!!!
Thank you!
good job
Very good vids
Awesome !!!
Thank you!
This may sound stupid, but it never occurred to me to angle the chargers downward for easier access to them. I'm glad that I haven't built it yet, so I can still make changes to my plan/drawing of the cabinet I want to make for my cordless tools and their batteries. I haven't decided to make a cabinet with a door or no door. Any suggestions? James, Thank you for another great tutorial! I hope you and yours have a Merry Christmas and a happy and healthy New Year!! ~Dolly
Nice job 👍
Thank you!
James, Now I’ve seen everything! You actually used true ‘beads’ of glue!!! 😉
Great project. Thanks for taking the time to share it. Will you have many more shop projects, cuz from the tour it looks like most of them are done?
Hi Barbara. I am going to be building a new assembly table soon so that I can incorporate some cabinetry and I will be making a different outfeed table with built in cabinets also. There is also a maple and exotic wood woodworking bench with vises and the works on the calendar for early next year. And who knows what else. I take requests from my Patreon Patrons.
Nice 👍👍
A lot of work but it turned out real nice and sounds like it was exactly how you wanted it.
Very nice station dewalt 🥇
Thank you.
I think this would make a great lead in for designing and building a nail gun/ nail center next. Something which still protects them from collecting dust at the air connectors. Maybe small drawers for connectors and hangers on the side for the air hose(s)?
Hi Clyde. That's a great idea. If you are in Denver, you buy the plywood and I'll make it for you for free.
Good job dad and daughter. 👍 😉
Nice 👍
I just put mine on a shelf in the dead space area, works great! took me 2 minutes to hang the shelf.
Awesome.
I have 15 DeWalt drills, so using a shelving system like yours could pose an issue. They fit in the Kobalt cheapo tool box big drawer pretty well though. I find myself using mostly, my Milw... Surge, its really quiet. I think you made your shelf stronger than I make things, and that's really something. Looks like its really heavy! I like it though!