it's not about a cameras, it's about the power which is being harvested by power lines directly from ether so there is no fuel needed to produce the power, because it's free
It’s funny what weird shit that the UA-cam algorithm suggests you, never have I watched anything remotely close to this kind of video, and still I’m recommended this video.
This type of energy collection method requires a very short, high cross section of closed iron core (with almost no air gap allowed!) surrounding only 1 of the power lines. Basically it is a current transformer with a secondary load that is used to power some sensor, camera, battery, etc... The primary current is variable, determined by the load of the power line, typically I=100...1000 A. If the device needs for example P=10 W, then induced voltage/turn must be Vt=P/I=0.1...0.01 V. For 0.1 V you need an iron core cross-section of A=Vt/(4.4*Bmax*f)= 0.1/(4.4*1.4Tesla*50Hz)=3.2 cm^2. From the fact they used even bigger cross-section I assume they aimed for even lower primary current, or higher consumption, or couldn't manage to keep the air-gap tight enough. To keep the device safe from overloading a smartly controlled DC/DC (fly-back or boost type) converter is needed on the secondary (after rectification).
It's just a bullshit as they're actually saying the free energy is harvested directly by power lines from ether, no power plants are needed and burning fuels.
Is it stealing power needed to keep the power flowing to people, or is it gleaning power that’s already lost and useless to the functioning of the power grid?
power is harvested from ether directly by power lines and it's free energy, so no power plants is needed as there is no need to burn anything to harvest the power
It is stealing because the device's magnetic field will interfere with the line's current and it will create voltage-current phase shift (φ). This will cause a percentage of active power (P=V*I*cosφ) to become reactive (Q=V*I*sinφ), keeping apparent power (S=sqrt(P^2+Q^2)) constant. After all energy cannot be created out of nothing, can only be transferred or change form. The device takes energy, the line loses energy.
when you do power harvesting from power lines that could be assumed that you have been steeling electricity. I think that idea is good for public resorts.
power harvesting means the power is taken from ether directly by power lines and the energy is free , what they're saying is to cover the fact in their way of presenting their truth, which is lies, no fuel needed to produce power, except little amount at the beginning
If it's through magnetic induction it's not "energy stealing". My uncle has a little farm where there is a high voltage transmission line passing through. When you go near it, you feel the static electricity, you hear the energy "hhhuuuummm" and from time to time there are electrical discharge (like lightining). I think it's 14000v line (come from ITAIPU). In Foz do Iguaçu city, in some area of the city people can light a light bulb just putting the light bulb on the ground, the energy comes either from ITAIPÚ generators or from a transmission line from ITAIPÚ. It's not "stealing" if it is "leaking". They uses wires without insulation, because "it costs too much to insulate these types of wires" 👍
@@alanhulme5770 Faraday can be credited for his contribution to the study of electromagnetism and electrochemistry, but this is Tesla's tech. So "uhmm actually.." your ass up off muh dkk
Aside from the camera surveillance issue, when this type of device is charging up on the power line, does the power line lose ANYTHING in deliverable power? ⚡️➡️ (🐧📸) > ⚡️➡️ ? (Is what leaves the location slightly lower than what approached the location)
Electrostatically Harvesting Power from High Voltage Power Lines. Note from author: Please do not try this experiment without a thorough knowledge of electricity! Please understand that it is illegal to take power from power lines. This is an experiment only. If you run a single wire along a high voltage power line, (= or> 340KVAC), you will harvest a fair amount of voltage at micro amp levels. WARNING: KEEP AT LEAST 30 FEET FROM THE HIGH VOLTAGE LINE!! DO NOT DO THIS EXPERIMENT ON WINDY DAYS!! The longer the parallel wire, the higher the voltage and amperage you can collect. Run your (antenna wire) parallel to the power line in the trees adjacent to one outer phase of the power line. The higher the wire, (antenna), the better. Use small gauge bare wire hung from fishing line for insulation and support. Run at least 200 feet of bare antenna wire. 400 feet equals twice the power collected. Use a fishing pole and weight to put up the wires in the closest branches of the trees next to the HV line. WARNING, DO NOT TOUCH THE ANTENNA WIRE! YOU WILL GET SHOCKED! I recommend two pairs of rubber gloves and good boots for this. Ground the Antenna wire while you work until the transformer (s) are installed and you are ready for power. Provide a single or several 5 foot copper-plated ground rods at your termination point for the transformer high voltage return to ground. More grounds are better. The ground completes the high voltage antenna circuit. The trick is to present a minimum load to the antenna wire and to step down the electrostatically induced voltage. We need a very high voltage transformer to do this. A ham radio plate transformer rated at 10,000 volts works good. Neon sign transformers work well. You can use several used oil burner transformers with the secondary in series. They are 10 KV each so you can make a 50 KV secondary with five of them. Much better! Remember, the higher the transformer ratio from the high side to the low side of the transformer the better match you will have to the source (the power line antenna). We then connect the high voltage transformer secondary (HV) winding to the antenna and the ground. Separate transformers MUST have the 120 volt leads in parallel and IN-PHASE. You have created a capacitive-coupled step-down transformer. Place a 4 watt, 120 volt light across the 120 volt terminals of the transformer. If the light pops and you measure a higher voltage, you may add another single transformer to get to the voltage you desire from the HV transformer (s). You need to measure the AC voltage out of the HV transformer primary and find a 120 volt transformer for that voltage. Example: 600 volts out requires a 600 volt secondary and a 120 volt primary. Place this step-down transformer after the HV transformer. You may also ground the far end of the antenna wire to create electromagnetic coupling to the power line. No other circuit changes are required for this. Bring along some different wattage/voltage lamps, a car battery charger and small battery and some small AC motors to see the power you have collected. Have fun! Author: I am purposely not saying I ever did this. Work safely and remove the antenna when done so it will not blow into the high voltage power line.
If it's through magnetic induction it's not "energy stealing". My uncle has a little farm where there is a high voltage transmission line passing through. When you go near it, you feel the static electricity, you hear the energy "hhhuuuummm" and from time to time there are electrical discharge (like lightining). I think it's 14000v line (come from ITAIPU). In Foz do Iguaçu city, in some area of the city people can light a light bulb just putting the light bulb on the ground, the energy comes either from ITAIPÚ generators or from a transmission line from ITAIPÚ. It's not "stealing" if it is "leaking". They uses wires without insulation, because "it costs too much to insulate these types of wires" 👍
So let me get this straight if we were smart and Power lines in a way that we could ride on them or on a rail of sorts we could drive electric cars on them?
The tech we could apply is astonishing. Between magnetic bearings,chains, gears. If only we could make things airphobic only we could reach amazing levels of effeciency.
We have that, it's called trains. More seriously, this is a match because the line carries insane amounts of currents. If you try to somehow couple a transformer to it which is grounded, it's a disaster waiting to happen. Better use dedicated line with lower voltages around 10kV and directly tap into it.
@@HyperMario64 apologies. I try to always think.outside the box. Being a troll is just a hobbie when life is kicking my ass. I feel like we're stuck in the 50s relative to the tech that has arose. I'm impatient . There are more and more things being worked on daily. Yet were super reluctant to change unless there are big$$$ to me gained nevermind saving resources, making lives simpler, growing with the planet instead of against it. We could be living in the Jetsons cartoon within a few years if we got our shit together. Instead it feel like we're backsliding socially and unfortunatly evolutionarily, quite stressful. What would air(nitrogen)phobic look like anyways...anti-gravity?
So we can put them on our power lines to power our house and not pay Edison because were making our own power? What is the ratio of power you get off a line 120 volt line = ? Volts with # turns x gauge of wire makes 15 volts! Is there a formula?
No, you can not. This is not the aim of this development, and it is not capable either. This is a current transformer, while your house needs a voltage transformer. This transformer can only supply small, and strongly ground-isolated loads, while your house is a big and ground-connected load. The owner of this device probably pay for the power company, but the price of the electricity for its whole lifespan is much lower than the price of this device. The whole electricity-bill topic is quite irrelevant. The point here is that small devices can be placed along the power lines instantly without having to build regular, giantic and expensive voltage transformers.
I know. but thought it would be nice. If you want to be a billionaire over night we need wireless power. power plant to a substation then to your home no wires. water and natural gas also No pipes
People have been power harvesting electricity from power lines since they were first installed. People were putting insulators on fence post then stringing bare copper wire for a hundred feet or more, then connecting a transformer to boost the amps and wattage to suit their needs...all illegal...and against the law of course...Ever notice when you drive under power lines with your radio on and you get all that static & buzzing? you are driving through the power field that the power lines create...All that electro magnetic energy is going through you as well...not healthy
One would need veeery long distance (1000s feet) and area below EHV power line to get 1 kW of power and good impedance matching device. Another method is the 50 (60) Hz BIG air core coil resonance. For that, tons of thin copper is required (expensive investment)
Illegal for us, but not the power company.....right... past me the crack pipe.. non sense. The hiding of free energy is at the beginning of the end. Ken Engle=33
@@williamjones7604 In my country it's not illegal (at least there's not law forbidding it) as long as the owner is doing it at his property. If you're more than 3 m from their HV equipment and you're doing nothing against environmental regulations you're free to try it. [EDIT: I live in Europe] 😊
These guys used to work for the CIA and got a billion dollars ! one night ---when they were drinking CoronaS with double limeS* they said " we can make a trillion-dollar " Selling To the public*
Currently working on projects like this, and I don't see the downside of it as stealing energy. The amount is very minimal, plus it aids people to monitor the power line errors. I embrace innovation, and utilize what we have now for further improvement.
dolphin2303 not stealing? just because no meter is currently measuring does not mean there is no energy transferring from the wire......its the only way the device gets its energy...by taking it from the wire via induction. if energy could magically appear in the device with none being lost in the wire, then e equals mc squared is totally wrong and we can all get free energy. we can cut the production of electricity down because we can just duplicateore with more devices. you are deceiving yourself if you don't see this as theft. be careful with your project.
@@mrchordstriker It is not stealing, because it obviously requires the approval of the power distribution company, or even the user IS the power distribution company. Stealing is a law/financial term, can not be applied to physics/technology. If they pay for the energy, and the owner accept it, then it can not be stealing, but this is not the subject of the current stage of development.
@@PafiTheOne believe it or not, sucking some energy from the lines, DOES mean the end user might just get a brown out (shortage of electricity), on their end. Because someone took some energy enroute to their home. They paid for that electricity, and the company fell short and failed them. Like a boss, the hydro co has to take responsibility for the shortcoming. What do they do? Find out why and where their failure was. Guess what they find someone sucked their energy out of their lines like a mosquito. You are arguing mosquitos do not steal your blood. Its the same. Enough mosquito's and you will react. Same legally with hydro being sucked out of power lines. You may think your extraction does not have consequences because it is seemingly slight and inconsequential, until there are ten million with your point if view. Some counties already experience county wide brown outs from electricity demands, a pile of mosquitos will make it worse. You may argue it is not stealing until the legal world steps in. Ok. But it IS taking frim someone who supplied the power in the first place, and taking a tiny amount ends up with someone who paid for that hydro, doing without that hydro. You may be a tricky word gaming democrat desperate to excuse stealing or else a dumhead it doesn't really matter. Hydro companies will push the legal end of taking other peoples property if that's what it takes. To play word games beforehand, is usually what prompts legal acts. Taking, stealing, matter if interpretation for you OK that's yer mindset....until YOU have a brownout that crashes your computer and all you are left with is recalling this text.Thanks for responding have a day.
@@mrchordstriker You have understood nothing. The purpose of this development is not stealing, what is more, it is *impossible* to use for stealing electricity, because such device costs much more than the price of the energy can be harvested during its whole lifespan. It is not intended and will never be used by people who want to tap into power line illegally. This idea tells more about you. The whole topic of stealing is an ignorant, irrelevant idea, this is why I mentioned the terminology refers to a non-technical domain and should be abandoned. The typical expected users of this technology is the owner of the power line, police or other security authorities, FBI, etc... Do you really think if they use this technology, then they steal energy? (Weather they pay for the electricity separately or not.) The weight of these devices, or the potential failure of them poses much more risk then the electric load they cause, therefore they will be strictly regulated before mass production.
PafiTheOne What a long statement wow. I went to college to learn electromagnetism. Graduated top of my class. To charge up anything using hydro lines, is to take from the electrons in the wire, into your transformer in your device, into your batteries. If you do not want to call it stealing because it gives you the iggies, well then call it taking. You are taking electrons from one place, and putting them in your batteries. Period. That is my whole point. Please do not badger me about stealing, I only know the physics, not the legality of it. That part is up to you. Have a day.
It is stealing because the device's magnetic field will interfere with the line's current and it will create voltage-current phase shift (φ). This will cause a percentage of active power (P=V*I*cosφ) to become reactive (Q=V*I*sinφ), keeping apparent power (S=sqrt(P^2+Q^2)) constant. After all energy cannot be created out of nothing, can only be transferred or change form. The device takes energy, the line loses energy.
Electricity is freely harvested via the superconductors of the national grid in the UK. The ionosphere is positively charged and the earth is negatively charged. Every metre in altitude there’s 100v of electricity. Since it’s inception from the early 1930’s electricity has been literally taken freely directly from the atmosphere and you’ve all been charged. There’s not a single proof of video real hard evidence that electricity is produced in coal powered electricity stations. They only produce carbon based products. Show me a turbine in a coal power station actually providing power into the grid and the process and quantities fed into it. Compare the power output of the earth to what the national grid produces. Good luck people you’ve all been duped into paying for free energy right from the start. Thank me later 👊😇🙏
@@happydream9268 you need a lot of cable to remove the power potential above you. The Eiffel Tower was an experiment to remove the power potential from the atmosphere but it failed.
They are not stealing the electrical current. they are using the magnetic field generated from the alternating current, to produce more electric, as i understand it. Very interesting concept.
Yes it is stealing power, the power company has to run their generators that much harder to supply the customers the same as before plus this device too.
3DOrama yah very interesting eh. add this to your interest. let's build a whole pile of those things, stick them on the wires, and then cut out one electricity power station! why stop there let's do another. and another......two things eh...one is the conservation of energy principles they are violated. two it is reality energy is transferred via induction that is how all transformers work. those lines carry elec at over a million volts. then they enter that big can up the pole at yer house that changes it back to 120 volts (oversimplified description I know). that transformer is doing the same thing as the device, only you areetered and paying this so called company is not. its leeching. enough of those will trigger reaction from hydro and they will easily find those devices. this idea is theft and will be stopped quickly.
when you plug something to your socket the process of powering your device is the same. You use a transformer that transforms electromagnetic field to your device.
It is stealing because the device's magnetic field will interfere with the line's current and it will create voltage-current phase shift (φ). This will cause a percentage of active power (P=V*I*cosφ) to become reactive (Q=V*I*sinφ), keeping apparent power (S=sqrt(P^2+Q^2)) constant. After all energy cannot be created out of nothing, can only be transferred or change form. The device takes energy, the line loses energy.
Wow now we can use the power lines as a legal loophole to install surveillance without warrants, is it 1984 yet ? I mean the screens are listening now
I do not like the idea of cameras everywhere and especially do not like ones that can fly over my home and look like birds.
I don't like shotguns
@@derarty4290 Slingshots work great too!!
it's not about a cameras, it's about the power which is being harvested by power lines directly from ether so there is no fuel needed to produce the power, because it's free
@@cyganmarek no its not free, power plants pay for it
@@maxczarnecki0 It's completely free and you can harvest it without power plants, check the subject on duckduckgo
It’s funny what weird shit that the UA-cam algorithm suggests you, never have I watched anything remotely close to this kind of video, and still I’m recommended this video.
This type of energy collection method requires a very short, high cross section of closed iron core (with almost no air gap allowed!) surrounding only 1 of the power lines. Basically it is a current transformer with a secondary load that is used to power some sensor, camera, battery, etc... The primary current is variable, determined by the load of the power line, typically I=100...1000 A. If the device needs for example P=10 W, then induced voltage/turn must be Vt=P/I=0.1...0.01 V. For 0.1 V you need an iron core cross-section of A=Vt/(4.4*Bmax*f)= 0.1/(4.4*1.4Tesla*50Hz)=3.2 cm^2. From the fact they used even bigger cross-section I assume they aimed for even lower primary current, or higher consumption, or couldn't manage to keep the air-gap tight enough. To keep the device safe from overloading a smartly controlled DC/DC (fly-back or boost type) converter is needed on the secondary (after rectification).
I knew that! haha!
THE idea is great. How much could one get from the power line coming into a home that is 240 volts Sir ???
It isnt the magnetic field. It's the shifting magnetic field that induces current
I've been looking for practical application of this sorta tech for years!
You guys rock!
It's just a bullshit as they're actually saying the free energy is harvested directly by power lines from ether, no power plants are needed and burning fuels.
So... these guys just now figured out Maxwell's equations?
Is it stealing power needed to keep the power flowing to people, or is it gleaning power that’s already lost and useless to the functioning of the power grid?
power is harvested from ether directly by power lines and it's free energy, so no power plants is needed as there is no need to burn anything to harvest the power
It is stealing because the device's magnetic field will interfere with the line's current and it will create voltage-current phase shift (φ). This will cause a percentage of active power (P=V*I*cosφ) to become reactive (Q=V*I*sinφ), keeping apparent power (S=sqrt(P^2+Q^2)) constant. After all energy cannot be created out of nothing, can only be transferred or change form. The device takes energy, the line loses energy.
@@cyganmarek please share a video about this thanks
Neat stuff coming into interest lately thankfully
Can you do useful induction at the ground level?
If you only need a few milliamps, then yes.
when you do power harvesting from power lines that could be assumed that you have been steeling electricity. I think that idea is good for public resorts.
power harvesting means the power is taken from ether directly by power lines and the energy is free , what they're saying is to cover the fact in their way of presenting their truth, which is lies, no fuel needed to produce power, except little amount at the beginning
If it's through magnetic induction it's not "energy stealing". My uncle has a little farm where there is a high voltage transmission line passing through. When you go near it, you feel the static electricity, you hear the energy "hhhuuuummm" and from time to time there are electrical discharge (like lightining). I think it's 14000v line (come from ITAIPU). In Foz do Iguaçu city, in some area of the city people can light a light bulb just putting the light bulb on the ground, the energy comes either from ITAIPÚ generators or from a transmission line from ITAIPÚ.
It's not "stealing" if it is "leaking". They uses wires without insulation, because "it costs too much to insulate these types of wires" 👍
@@aquamastertheonlyone do you know how transformer works?
@@interbudelblag Yes.
Why the fuck do they want cameras everywhere? I don't like that crap.
How is nobody talking about the fact that this is Nikola Tesla's technology? AC/DC Tesla/Edison..
It's Faradays technology
@@alanhulme5770 Faraday can be credited for his contribution to the study of electromagnetism and electrochemistry, but this is Tesla's tech. So "uhmm actually.." your ass up off muh dkk
Three Hungarian engineers ZBD came up with current transformer which actually does the job of harvesting.
Next time I see a robot bird on a wire, I'm gettin' my BB gun!!!
Aside from the camera surveillance issue, when this type of device is charging up on the power line, does the power line lose ANYTHING in deliverable power?
⚡️➡️ (🐧📸) > ⚡️➡️ ?
(Is what leaves the location slightly lower than what approached the location)
No
Electrostatically Harvesting Power from High Voltage Power Lines.
Note from author: Please do not try this experiment without a thorough knowledge of electricity! Please understand that it is illegal to take power from power lines. This is an experiment only.
If you run a single wire along a high voltage power line, (= or> 340KVAC), you will harvest a fair amount of voltage at micro amp levels. WARNING: KEEP AT LEAST 30 FEET FROM THE HIGH VOLTAGE LINE!! DO NOT DO THIS EXPERIMENT ON WINDY DAYS!! The longer the parallel wire, the higher the voltage and amperage you can collect. Run your (antenna wire) parallel to the power line in the trees adjacent to one outer phase of the power line. The higher the wire, (antenna), the better. Use small gauge bare wire hung from fishing line for insulation and support. Run at least 200 feet of bare antenna wire. 400 feet equals twice the power collected. Use a fishing pole and weight to put up the wires in the closest branches of the trees next to the HV line.
WARNING, DO NOT TOUCH THE ANTENNA WIRE! YOU WILL GET SHOCKED! I recommend two pairs of rubber gloves and good boots for this. Ground the Antenna wire while you work until the transformer (s) are installed and you are ready for power. Provide a single or several 5 foot copper-plated ground rods at your termination point for the transformer high voltage return to ground. More grounds are better. The ground completes the high voltage antenna circuit.
The trick is to present a minimum load to the antenna wire and to step down the electrostatically induced voltage. We need a very high voltage transformer to do this. A ham radio plate transformer rated at 10,000 volts works good. Neon sign transformers work well. You can use several used oil burner transformers with the secondary in series. They are 10 KV each so you can make a 50 KV secondary with five of them. Much better! Remember, the higher the transformer ratio from the high side to the low side of the transformer the better match you will have to the source (the power line antenna). We then connect the high voltage transformer secondary (HV) winding to the antenna and the ground. Separate transformers MUST have the 120 volt leads in parallel and IN-PHASE. You have created a capacitive-coupled step-down transformer. Place a 4 watt, 120 volt light across the 120 volt terminals of the transformer. If the light pops and you measure a higher voltage, you may add another single transformer to get to the voltage you desire from the HV transformer (s). You need to measure the AC voltage out of the HV transformer primary and find a 120 volt transformer for that voltage. Example: 600 volts out requires a 600 volt secondary and a 120 volt primary. Place this step-down transformer after the HV transformer. You may also ground the far end of the antenna wire to create electromagnetic coupling to the power line. No other circuit changes are required for this. Bring along some different wattage/voltage lamps, a car battery charger and small battery and some small AC motors to see the power you have collected. Have fun! Author: I am purposely not saying I ever did this. Work safely and remove the antenna when done so it will not blow into the high voltage power line.
If it's through magnetic induction it's not "energy stealing". My uncle has a little farm where there is a high voltage transmission line passing through. When you go near it, you feel the static electricity, you hear the energy "hhhuuuummm" and from time to time there are electrical discharge (like lightining). I think it's 14000v line (come from ITAIPU). In Foz do Iguaçu city, in some area of the city people can light a light bulb just putting the light bulb on the ground, the energy comes either from ITAIPÚ generators or from a transmission line from ITAIPÚ.
It's not "stealing" if it is "leaking". They uses wires without insulation, because "it costs too much to insulate these types of wires" 👍
This is a brilliant idea!
So let me get this straight if we were smart and Power lines in a way that we could ride on them or on a rail of sorts we could drive electric cars on them?
The tech we could apply is astonishing. Between magnetic bearings,chains, gears. If only we could make things airphobic only we could reach amazing levels of effeciency.
We have that, it's called trains. More seriously, this is a match because the line carries insane amounts of currents. If you try to somehow couple a transformer to it which is grounded, it's a disaster waiting to happen. Better use dedicated line with lower voltages around 10kV and directly tap into it.
I am well aware. Thanks for regurgitating info. Try creating.
@@cavelvlan25 Hey man no need to be like that, you just seriously suggested something crazy so I thought that would be new for you.
@@HyperMario64 apologies. I try to always think.outside the box. Being a troll is just a hobbie when life is kicking my ass. I feel like we're stuck in the 50s relative to the tech that has arose. I'm impatient . There are more and more things being worked on daily. Yet were super reluctant to change unless there are big$$$ to me gained nevermind saving resources, making lives simpler, growing with the planet instead of against it. We could be living in the Jetsons cartoon within a few years if we got our shit together. Instead it feel like we're backsliding socially and unfortunatly evolutionarily, quite stressful.
What would air(nitrogen)phobic look like anyways...anti-gravity?
Where can you get one? Looking for 220v 30A
I know a guy that knows a guy.
So we can put them on our power lines to power our house and not pay Edison because were making our own power? What is the ratio of power you get off a line 120 volt line = ? Volts with # turns x gauge of wire makes 15 volts! Is there a formula?
No, you can not. This is not the aim of this development, and it is not capable either. This is a current transformer, while your house needs a voltage transformer. This transformer can only supply small, and strongly ground-isolated loads, while your house is a big and ground-connected load. The owner of this device probably pay for the power company, but the price of the electricity for its whole lifespan is much lower than the price of this device. The whole electricity-bill topic is quite irrelevant. The point here is that small devices can be placed along the power lines instantly without having to build regular, giantic and expensive voltage transformers.
I know. but thought it would be nice. If you want to be a billionaire over night we need wireless power. power plant to a substation then to your home no wires. water and natural gas also No pipes
This was a known thing 200 years ago. It is LITERALLY what a transformer does. WTF?
I wonder if these little birds have electric meters inside.
So all you need to harvest power is a helicopter the size of a car that can lift 10 lb? Sound's great.
People have been power harvesting electricity from power lines since they were first installed. People were putting insulators on fence post then stringing bare copper wire for a hundred feet or more, then connecting a transformer to boost the amps and wattage to suit their needs...all illegal...and against the law of course...Ever notice when you drive under power lines with your radio on and you get all that static & buzzing? you are driving through the power field that the power lines create...All that electro magnetic energy is going through you as well...not healthy
One would need veeery long distance (1000s feet) and area below EHV power line to get 1 kW of power and good impedance matching device. Another method is the 50 (60) Hz BIG air core coil resonance. For that, tons of thin copper is required (expensive investment)
Illegal for us, but not the power company.....right... past me the crack pipe.. non sense. The hiding of free energy is at the beginning of the end. Ken Engle=33
@@williamjones7604 In my country it's not illegal (at least there's not law forbidding it) as long as the owner is doing it at his property. If you're more than 3 m from their HV equipment and you're doing nothing against environmental regulations you're free to try it. [EDIT: I live in Europe] 😊
@@williamjones7604 it is not free energy.
These guys used to work for the CIA and got a billion dollars ! one night ---when they were drinking CoronaS with double limeS*
they said " we can make a trillion-dollar "
Selling To the public*
That bird on the power line in front of your place is actually your neighbor watching you!
He works for the CIA and they know what you did*
LOL
Om this is huge
So that's what pigeons are
This is not new technology. 😂I learned how to do this from reading a book written in the 1930s.
awesome
Currently working on projects like this, and I don't see the downside of it as stealing energy. The amount is very minimal, plus it aids people to monitor the power line errors. I embrace innovation, and utilize what we have now for further improvement.
dolphin2303 not stealing? just because no meter is currently measuring does not mean there is no energy transferring from the wire......its the only way the device gets its energy...by taking it from the wire via induction. if energy could magically appear in the device with none being lost in the wire, then e equals mc squared is totally wrong and we can all get free energy. we can cut the production of electricity down because we can just duplicateore with more devices. you are deceiving yourself if you don't see this as theft. be careful with your project.
@@mrchordstriker It is not stealing, because it obviously requires the approval of the power distribution company, or even the user IS the power distribution company. Stealing is a law/financial term, can not be applied to physics/technology. If they pay for the energy, and the owner accept it, then it can not be stealing, but this is not the subject of the current stage of development.
@@PafiTheOne believe it or not, sucking some energy from the lines, DOES mean the end user might just get a brown out (shortage of electricity), on their end. Because someone took some energy enroute to their home. They paid for that electricity, and the company fell short and failed them. Like a boss, the hydro co has to take responsibility for the shortcoming. What do they do? Find out why and where their failure was. Guess what they find someone sucked their energy out of their lines like a mosquito. You are arguing mosquitos do not steal your blood. Its the same. Enough mosquito's and you will react. Same legally with hydro being sucked out of power lines. You may think your extraction does not have consequences because it is seemingly slight and inconsequential, until there are ten million with your point if view. Some counties already experience county wide brown outs from electricity demands, a pile of mosquitos will make it worse. You may argue it is not stealing until the legal world steps in. Ok. But it IS taking frim someone who supplied the power in the first place, and taking a tiny amount ends up with someone who paid for that hydro, doing without that hydro. You may be a tricky word gaming democrat desperate to excuse stealing or else a dumhead it doesn't really matter. Hydro companies will push the legal end of taking other peoples property if that's what it takes. To play word games beforehand, is usually what prompts legal acts. Taking, stealing, matter if interpretation for you OK that's yer mindset....until YOU have a brownout that crashes your computer and all you are left with is recalling this text.Thanks for responding have a day.
@@mrchordstriker You have understood nothing. The purpose of this development is not stealing, what is more, it is *impossible* to use for stealing electricity, because such device costs much more than the price of the energy can be harvested during its whole lifespan. It is not intended and will never be used by people who want to tap into power line illegally. This idea tells more about you. The whole topic of stealing is an ignorant, irrelevant idea, this is why I mentioned the terminology refers to a non-technical domain and should be abandoned. The typical expected users of this technology is the owner of the power line, police or other security authorities, FBI, etc... Do you really think if they use this technology, then they steal energy? (Weather they pay for the electricity separately or not.) The weight of these devices, or the potential failure of them poses much more risk then the electric load they cause, therefore they will be strictly regulated before mass production.
PafiTheOne What a long statement wow. I went to college to learn electromagnetism. Graduated top of my class. To charge up anything using hydro lines, is to take from the electrons in the wire, into your transformer in your device, into your batteries. If you do not want to call it stealing because it gives you the iggies, well then call it taking. You are taking electrons from one place, and putting them in your batteries. Period. That is my whole point. Please do not badger me about stealing, I only know the physics, not the legality of it. That part is up to you. Have a day.
Stealing implies that the electric companies are losing something, they're not.
It is stealing because the device's magnetic field will interfere with the line's current and it will create voltage-current phase shift (φ). This will cause a percentage of active power (P=V*I*cosφ) to become reactive (Q=V*I*sinφ), keeping apparent power (S=sqrt(P^2+Q^2)) constant. After all energy cannot be created out of nothing, can only be transferred or change form. The device takes energy, the line loses energy.
LOLOLOLOLOL
😎
bird
Seems creepy.
Electricity is freely harvested via the superconductors of the national grid in the UK.
The ionosphere is positively charged and the earth is negatively charged.
Every metre in altitude there’s 100v of electricity.
Since it’s inception from the early 1930’s electricity has been literally taken freely directly from the atmosphere and you’ve all been charged.
There’s not a single proof of video real hard evidence that electricity is produced in coal powered electricity stations.
They only produce carbon based products.
Show me a turbine in a coal power station actually providing power into the grid and the process and quantities fed into it.
Compare the power output of the earth to what the national grid produces.
Good luck people you’ve all been duped into paying for free energy right from the start.
Thank me later
👊😇🙏
What the fuck
where can I buy a mini super conductor for my home? lol
@@happydream9268 you need a lot of cable to remove the power potential above you.
The Eiffel Tower was an experiment to remove the power potential from the atmosphere but it failed.
365 days a year😆😆😆😆
They are not stealing the electrical current. they are using the magnetic field generated from the alternating current, to produce more electric, as i understand it. Very interesting concept.
Yes it is stealing power, the power company has to run their generators that much harder to supply the customers the same as before plus this device too.
3DOrama yah very interesting eh. add this to your interest. let's build a whole pile of those things, stick them on the wires, and then cut out one electricity power station! why stop there let's do another. and another......two things eh...one is the conservation of energy principles they are violated. two it is reality energy is transferred via induction that is how all transformers work. those lines carry elec at over a million volts. then they enter that big can up the pole at yer house that changes it back to 120 volts (oversimplified description I know). that transformer is doing the same thing as the device, only you areetered and paying this so called company is not. its leeching. enough of those will trigger reaction from hydro and they will easily find those devices. this idea is theft and will be stopped quickly.
You do know that their coil creates resistance right?
when you plug something to your socket the process of powering your device is the same. You use a transformer that transforms electromagnetic field to your device.
It is stealing because the device's magnetic field will interfere with the line's current and it will create voltage-current phase shift (φ). This will cause a percentage of active power (P=V*I*cosφ) to become reactive (Q=V*I*sinφ), keeping apparent power (S=sqrt(P^2+Q^2)) constant. After all energy cannot be created out of nothing, can only be transferred or change form. The device takes energy, the line loses energy.
🌚