Learn Step by Step How to do Flow Simulation in SolidWorks on Cross Flow Turbine
Вставка
- Опубліковано 16 вер 2024
- In this solidworks Flow Simulation Tutorial you will learn how to do a flow simulation on cross flow turbine in solidworks.
Download this model : techexpertpro....
About this Channel
Here you will find Videos Related to
1. SolidWorks 2. Hydro Power
3. FYP Designing and Manufacturing. 4. Electrical Engineering
5. 3D Printing 6. Low RPM Alternators
7. Manufacturing of Hydro Turbines
Subscribe to this channel for all updates mentioned above.
SolidWorks Complete Learning Step by Step from Basics to Advanced Level: • SolidWorks Complete Le...
Urdu / Hindi SolidWorks Learning : • Learn SolidWorks in ur...
Want me to Design Project for You???
Contact Me
My Facebook id: / usman.akhtar.5
My Page link: / solid.online.training
Sadly the only great video out there that get's straight to the point
Some of them webinars are two hours long eh? :-/
How to simulate the rotation of turbine without prescribing it's rotational speed? Like let it start moving due to air flow and find it's speed. Thanks.
Thats what i am also looking for
@@MrJitendra007 me too, did you find how?
@@atef1419 ua-cam.com/video/NauURWekZmY/v-deo.html
@@MrJitendra007 ua-cam.com/video/NauURWekZmY/v-deo.html
@bidon pomoew did you find how?
Maashaa Allah!
A remarkably thorough tutorial.
My computer is not capable of running this kind of simulation..whew!!
find Christ
The link to the model doesn't work anymore. Could you please make it available again? I want to test how plausible the Solidworks simulations are and give some feedback. Thanks from Enschede:)
Okay thx for ur tutorial brother 🤝
How we can see results, blades are not rotating and they are not selected in rotating parts, you have only red shaft selected
Can we work with flowsimulation and motion at the same time?
good content loved it
Can you make a full video of the Cross Flow Turbine Simulation in Ansys?
Good Job and keep it up bro.
Nice.Very informative.Thanks
Hi, my flow trajectories failed to complete. I don't know why, What should I do?
Bro why you put value for angular velocity in rotating region ? i think you also give value to water to check the angular velocity of turbine, and thats the purpose we use turbines.i think you just covered flow trajectories nothing more and that was good.nice work
The link doesn't work unfortunately.
Why it's enouth to select only sfaft as a rotating region?
Sir is it possible to have inviscid flow? How do we model incompressible flow in it?
Thanks for the informative video...
masha allahu, thx u brother :D
find Christ
We alejkumuselam, thank you for help
Could 2 phase flow be handled by solid flow simulation ? i noticed there are several refrigerants in the fluids list.
Hero
MY VERTICAL WIND MILL PROJECT DETAIL
FAN BLADE 66INCH WIDTH HIGHT 144 INCH FAN 10NOS
AIR DANCITY 241
WIND VELOCITY 5.5 METER PAR SECOUND TO 15 METER PAR SECOUND
HOW CALCULAT RPM
HOW MUCH RPM GENARATE
PLZ HELP
Great video, but I cannot understand why you choose external flow rather than internal flow. Is it a good approximation for this type of problem? Why? I know that in this type of problem it's necessary to consider a free surface which is not possible to use in solidworks combined with rotating region. Is it because of this? I was very thankful to hear more about this.
Internal floe is done only when your part is vacuum tight. But in this case we don't have a vacuum tight assembly
Ok. Thanks. But isn't it supposed to be in this type of turbines?
?
This is very useful
can u teach where the option for parameter rpm of the blades and the shaft?
i dont see it
Did you find a way to do that? Please reply
@@atef1419 i don't find the way
fan blades are going in the wrong direction. blades should be backwardly inclined.
The rotation is CCW! The blades are fine.
I come from Indonesia, from Muhammadiyah Riau university. I am interested in casting, I am taking a final assignment in college, horizontal centrifugal casting. Can you help me with a horizontal casting centrifugal tutorial solidworks ? please help me
Twin screw compressor Geometry and flow simultion
Can't download the model.
Bro adding points in flow trajectories doesn't work
Wa'alaikummussalam
make first, measure externally - prototypes probably more precise than 3d software.
Simulations save wasted resources and time
need some information about simulation , i sent mail to u plz reply
hello bro, can you send me the the turbine assy as a step file, cause I have SWX 2016. Tnx a lot
Hello, my email: bg-baernstein@web.de
Hugs and kisses
Isaac NASA
can u share the link of the model
Link is in the description
@@SolidWorksTutorial1 bro i can not find it in the description only fb page link and fb id links are provided
grabcad.com/library/cross-flow-turbine-for-solidworks-practice-2
Which version of solid Works you need to run flow simulation?
all versions of solidworks support flow simulation, but i am using solidworks 2016
I use Solidworks standard 2018. I couldn’t find Flow Simulation in Add-In (time 0.54)
maybe there is some problem in your software.
@@kandasamyrajan Flow is separate module from 3D model. If want you need buy separately. for Info refer Solidworks matrix in their own website
@@manikkammn Thanks for the reply. I use Solidworks 2020 standard version. This video used Premium version. Also I do not have intention to buy separate add-in. If above one is possible with Solidworks 2020 standard version I will replicate it.
Hi dear, I think there are to mistake in the simulation. First, you chose the wrong direction for gravity. Second, you didn't define any rotation to the blade you add rotation to the shaft only.
bhai manufacturing karo ek baar
Bhai ham log 30 sal se turbines manufacturing kar rahy hain.
It appeares that your gravity vector is not set properly. I think it should be z=9.81 and x,y=0
he set it like that to avoid rotating the model.
Tried to download and my Malwarebytes said there was a Trojan, I did not download.
where is the link?
6:12
miner virus
HINDI ffs, please put that in your heading, cant understand a work you speak