Hi, i have trouble. the collective pitch on my heli does not move at all. It works alright on Step 5 except pitch shows -118 on low, 118 on high on step 5. Do not know if this affects my collective pitch not moving. Aileron left and right, elevator all movements fine.
Morning, I would not think having 118 would stop the pitch from working although I would recommend that you change the endpoints on your radio to limit that to 100 and see. I cannot think why collective would not move if you set all the travels correctly in step 5 unless you somehow had rescue mode active already?
Hi, please help me with the problem I have in the step 6, namely after everything ok in step 5, in step 6 I ticked the boxes so the movement of the sticks matches the movement of swash and rudder but when putting away the transmitter and check the heli by hand the movements of both swash and rudder are wrong
This is a tough one without access to a model. I would go back to previous steps and make sure you are not missing/forcing something. Specifically, is the orientation configuration of the Spirit unit is correct? This is how spirit knows which way to correct of movement.
You can do it from the beginning making sure you don’t actually have the motor or blades connected for safety sake. If you are using an ESC with BEC then that is what you want to do. I use a small battery for initial setup for convenience and safety.
Could help Which receiver you use in these config with the microspirit and radio master??
Hi, i have trouble. the collective pitch on my heli does not move at all. It works alright on Step 5 except pitch shows -118 on low, 118 on high on step 5. Do not know if this affects my collective pitch not moving. Aileron left and right, elevator all movements fine.
Morning, I would not think having 118 would stop the pitch from working although I would recommend that you change the endpoints on your radio to limit that to 100 and see. I cannot think why collective would not move if you set all the travels correctly in step 5 unless you somehow had rescue mode active already?
@@yufasa thanks. After disengage rescue mode is fine. It was previous owner set rescue mode
Hi, please help me with the problem I have in the step 6, namely after everything ok in step 5, in step 6 I ticked the boxes so the movement of the sticks matches the movement of swash and rudder but when putting away the transmitter and check the heli by hand the movements of both swash and rudder are wrong
This is a tough one without access to a model. I would go back to previous steps and make sure you are not missing/forcing something. Specifically, is the orientation configuration of the Spirit unit is correct? This is how spirit knows which way to correct of movement.
@@jameswilson999 Sorry, the model is a Logo 400 heli and it is included in the presets models
Can't find your video about Radio Spirit setup
I realize that I never published the radio configurations but only the integration setup...let me see if I can find them and upload.
At what point in time we hook up the ESC?
You can do it from the beginning making sure you don’t actually have the motor or blades connected for safety sake. If you are using an ESC with BEC then that is what you want to do. I use a small battery for initial setup for convenience and safety.
@@yufasa then I will connect a small battery to it and power up everything including the unit and Rx. Thank you very much!
where did you get the setup red blades?
@@radutenea7149 I 3D printed them