Pimp My Para3! Micarta Scale Swap with Titanium Hardware! Parts from Ripps Garage Tech & Flytanium
Вставка
- Опубліковано 7 вер 2024
- In this video I swap the factory scales and hardware off of my Spyderco Para3 in Maxamet and display my amateur knife maintenance skills, or lack thereof. The scales are Blue Denim Micarta from Ripps Garage Tech LLC, and the hardware is Bronze Anodized Titanium from Flytanium. The clip used is from Lynch Northwest. All items are linked below.
Maxamet Para3: riversedgecutl...
RGT Scales: rippsgaragetec...
Flytanium Hardware: flytanium.com/...
Lynch Clip: www.lynchnw.co...
Bearded Gear Merch: teespring.com/...
Support Bearded Gear on Patreon: / beardedgear
That Micarta looks awesome.
Thanks man!
I know this an old video, but an easy way to remove the liners from the scales is to screw in your pocket clip on the liner side and use that as a "handle" to pry the liner out.
Denim micarta feels awesome on a knife.
Agreed! This is my first experience with it and I'm loving it!
hey brother always rocking out the best knifes!!! also loving my sticker bro and your shout out will be out on the next video.. keep up the amazing work your almost to 600 bro!! congrats again on your 500
Thanks so much dude! Appreciate you! 👊🏻
@@beardedgear i appreciate you :)
That movement at the end was awsome
Haha thanks!
Thanks so much for the video there are few videos on about swapping scales on the para3 and you seem to have the best so far and I have managed to see a couple so far...thanks
"Thats what he said" hahahaha im subscribing for just that right there.
Quite the ordeal huh? Sweet choice on the scales. They really do look great, and I'm sure they feel great too.
really enjoyed this video man Thank You for Sharing !!
My pleasure dude! Thanks for watching!
Thank You for Sharing ,awaiting on my first
Para 3 and already thinking about customizing it
so many options .....Once again Thank You for Sharing !!! =+ )
Rad mod Jake. Those look great. Hoping Ripp’s gets some copper scales back in stock soon. It’ll add weight but I think they look dope.
Thanks man! I think copper scales would look dope, I tried ti scales on a PM2 once and it just wasn’t for me unfortunately. I like light PM2’s and Para3’s 🤷🏼♂️
Great video brother!!!
Thanks man! 👊🏻
I’m making denim micarta scales for my manix as I’m watching this
That's awesome! I hope they turn out good!
Try the skinny mod if you haven't yet, I was skeptical on it actually being a functional mod but it does actually feel more comfortable to me
Skinny mod?
@@BuffaloNickel9 yeah, look it up and try it
Just ordered me a set! Looks great 👍🏽
Skinny para 3 scales look nice but they take away greatly from the ergonomics, if fells like theres nothing in the back half of your hand.
Para 3 - knife definition.
I have some bronze scales for my PM 3, but this looks like a pretty difficult project. Already dreading it.
Beautiful micarta.. though I would’ve went with black clip and black hardware, it pops with the blue Jean micarta
That flip at the end was sick! how did you learn that?
If you sort my videos by most viewed I have a how to 👍🏻
Wtf jake my friend 😂..1 year later now, do you still not own a bottle or two of KPL?
Our favorite Lefty, Kev, has got to send you a bottle of the best Kife Pivot Lube! Lol
That is one shiny ass maxamet blade.
I changed out the hardware but now the blade is a little loose. Any tips?
Mr. Toez, can you do a sharpening video of this blade?
Great combination! Can you tell me more about your wiha torx set?
Can you swap lightweight frn scales?
Did the flytanium press fit pin/spacer by the front of the knife make your compression lock have lock stick? I noticed my press fit pin from flytanium was slightly larger or more tighter fitting than the stock one and plus the compression lock being steel rubbing against the titanium press fitting ends up galling and causing lock stick.
That looks like a pain to take apart.
You got hopps oil on your new scales. Still looks great tho.
Painful to watch all that sustained clumsiness. Using the knife tip to pry metal from plastic?! Ouch!
Is Titanium Hardware more or less prone to stripping( T6, T8 etc) than standard oem brand's spyderco, bm, etc hardware
Doesn't seem like they used any loctite ,,lucky you ,or is it the movie magic ??
The pivot of my para 3 broke and i ordered one from titanium. You think is going to be as durable? Thank you
The internals of the pivot or just the screws? The Flytanium screws are great, but they don’t replace the internal component of the pivot.
@@beardedgear the pivot barrel broke. Spyderco wants me to send it to us from greece. Impossible. I just ordered a titanium barrel fro ebay
Rusty Jocsen I have never used a titanium barrel, so I have no experience with it. Sorry!
Might help if you weren't using that monstrosity of a Benchmade tool to unscrew the screws. I mean there are drivers you know?
Did you even watch your own video after you output it? The volume need to be higher, a lot higher.
Buddy just watch some videos first and find out how to do this process, its not hard, just learn it first, nice knife also!!
you have more problems than anybody i know lol
Get a chunk of modeling clay and stop chasing the thing around with drivers.
what a dork. lmao
wear gloves
Sharp Dressed Knives makes a lanyard removal tool. Pliers helps to keep spacers from spinning, but use a cloth to protect it.
That's good to know! I'll probably grab one of those before my next project haha
Soft grip pliers for the win, won't go wrong