𝗛𝗢𝗪 𝗧𝗢: 𝗗𝘆𝘀𝗼𝗻 𝗖𝘆𝗰𝗹𝗼𝗻𝗲 𝗗𝗖𝟯𝟮 𝗩𝗮𝗰𝘂𝘂𝗺 𝗥𝗲𝗮𝘀𝘀𝗲𝗺𝗯𝗹𝘆
Вставка
- Опубліковано 5 вер 2024
- 𝗛𝗼𝘄 𝘁𝗼 𝗿𝗲-𝗮𝘀𝘀𝗲𝗺𝗯𝗹𝗲 𝘆𝗼𝘂𝗿 𝗗𝘆𝘀𝗼𝗻 𝗖𝘆𝗰𝗹𝗼𝗻𝗲 after its been cleaned to remove foul odor and make your wife happy. Low-Medium Difficulty. [**𝗧𝗥𝗔𝗗𝗘𝗠𝗔𝗥𝗞 𝗗𝗜𝗦𝗖𝗟𝗔𝗜𝗠𝗘𝗥 𝗕𝗲𝗹𝗼𝘄]
Tools Used:
1. Extendable narrow screw driver with T15 head
2. Thin, plastic envelope opener
Thanks for watching. If this video helped you, 𝗽𝗹𝗲𝗮𝘀𝗲 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗯𝗲 and join us in our 𝗷𝗼𝘂𝗿𝗻𝗲𝘆 𝘁𝗼 𝘀𝗮𝘃𝗲 𝗠𝗼𝗻𝗲𝘆, 𝗠𝗮𝗿𝗿𝗶𝗮𝗴𝗲𝘀, 𝗮𝗻𝗱 𝗠𝗼𝘁𝗵𝗲𝗿 𝗡𝗮𝘁𝘂𝗿𝗲...𝗼𝗻𝗲 𝘃𝗶𝗱𝗲𝗼 𝗮𝘁 𝗮 𝘁𝗶𝗺𝗲. See you next time at HANDY.DANDY.HUSBAND.
𝗵𝘁𝘁𝗽𝘀://𝘄𝘄𝘄.𝘆𝗼𝘂𝘁𝘂𝗯𝗲.𝗰𝗼𝗺/𝗰/𝗛𝗔𝗡𝗗𝗬𝗗𝗔𝗡𝗗𝗬𝗛𝗨𝗦𝗕𝗔𝗡𝗗
*𝗧𝗥𝗔𝗗𝗘𝗠𝗔𝗥𝗞 𝗗𝗜𝗦𝗖𝗟𝗔𝗜𝗠𝗘𝗥: H.D.H. does not own the DYSON logo or any DYSON intellectual property. This company's logo is being used to identify the product and is for educational purposes. There is no commercial benefit being derived and none is intended. DYSON has neither endorsed nor approved of this video. If you are the trademark/tradename owner please feel free to email me your concerns, if any: thehandydandyhusband.info@gmail.com.*
Very detailed. I took mine apart and cleaned it before I knew you're not supposed to get it wet. Oh well. You have a great and detailed vid on how to put it back together. Thanks
Hi Randall Meek, Thanks for watching and your positive comments. I am happy that I was able to help keep your vacuum running for another few years (maybe even more). All the best, H.D.H.
This was SO HELPFUL to deep-clean my Dyson D23 after making the same mistake and submerging it in water. Thank you so much!!
Hi Karen Lemke, thanks for watching and your appreciative comment. Very glad to help you out. All the best to you in 2021,
thanks, H.D.H [: { ]
Very good. Best explained ever seen. THX
Hi WEZ S.D.S. thanks for watching and sending me your comment. I am happy that I was able to help you out. All the best to you, H.D.H.
Thank you so much this was very helpful
Hi Tim and Penny Sayers, thank you for watching. I am very happy that you were able to get your Dyson up and working again. Hope it continues to serve you for many more years to come. All the best to you, H.D.H. [: { ].
Thanks!
Hi Ona, thanks for watching and commenting. You are very welcome. All the best to you in 2021. H.D.H. [: { ].
13:22 ошибка. Резиновое кольцо одевается после того как закручены винты
Привет. Спасибо за ваш комментарий. Пока я не говорю по-русски, основываясь на гугл переводчике, я не согласен с ошибкой в 13:22. Перед затяжкой винтов необходимо установить прокладку / резиновое кольцо. H.D.H. [: { ].
Do you know how to disassembling a the extensible arm? I can not yo block the third part.
Hi Fernando Boned Izuel, thanks for watching and your question (and your interesting UA-cam handle--made me laugh). I have not disassembled the extensible arm; stay tuned though as I may have a follow up video for an adapter to the arm that I am planning. With regard to your immediate problem, here is what I suggest: 1) You first need to determine the nature of the obstruction(s). To do this, I think you will need a camera snake probe or something similar, 2) once you have determined the nature of the obstruction, see whether you can pull it out with a flexible plumbing drain claws (this device has a flexible metal long body, typically 24"-36", with small metal claws that open and close when you depress the trigger). 3) If this doesn't solve your issue, then you may want to use an electrical wire snake--it is flexible and they come in lengths of over 20 feet. Make sure you cover the tip that you are inserting into the hose with plenty of duct tape to prevent the metal from puncturing the hose. Lay the hose to the vacuum down so that it sits flat, then run the wire snake into the hose until you reach the obstruction. Either push it into the canister or try to pull it out. A little bit of patience and elbow grease may reward you and get your vacuum operational again. If you have any further questions, let me know. Hope this helps, all the best, H.D.H. [: { ].
@@HANDYDANDYHUSBAND Manu thanks four tour quick answer. The problem is the circular seal has been removed, I don't know why. I have disassambling the upper parte but it is not possible to get It. Thanks a kit four tour answer. If It get a solution I report you.
@@fernandobonedizuel2267 Hi Fernando Boned Izuel, thanks for providing more information. Unfortunately, I don't know how to disassemble the arm, or the 'upper part' you mentioned. If you do find a solution, please let me know so that the rest of the community is made aware as well. Thanks, H.D.H.