+Khiem Dang Yes, it works fine. It is only a small delay between each shift, but I do not care. It's nice not having to check if you have put in sixth gear or not.
Hello!Which housing do you use for the camera?I have the same camera(and thesame bike :)) but the wind noise is terrible even with the waterproof housing.
Hi, I bought a speed triple year 06 1050. And how the lights above the tachometer flash in this video. It flashes for you from 8000 rpm to 10,000 rpm. It starts to light up on my motorcycle as early as 3000 rpm and at 5000 rpm the whole field is already lit and it doesn't change. Is it possible to set or change it? It's pretty annoying because it keeps shining. Thanks for the reply from anyone
torreto torreto: I found this online. See if this works for you. Setting Gear Change Light Limits: To reset the gear change light settings, turn on the ignition only. Press the 'trip' and 'scroll' buttons simultaneously for 4 seconds. After 4 seconds, the tachometer needle will move round to the last set position and the word 'tAcHo' will appear in the clock display. Press the 'set' button for 4 seconds. After 4 seconds, the rev limit will be set to zero. Pressing the 'set' button again at this point will turn off the gear changelights. To change the setting in increments of 1,000 rpm, press the 'scroll' button. The first press will start the setting at 3,500 rpm. Each individual press will then increase the settings in increments of 1,000 rpm. When the correct setting is shown, press the 'set' button to confirm. The setting can now be changed in increments of 100 rpm. When the correct setting is shown, pressing the 'set' button will confirm the setting.
+Ee .e Yes, my clothes smell exhaust after I have driven my bike. I think it is because of the dual high-mounted silencers. It would be better with low exhaust mounted.
this exhaust sounds so lovely
Beatiful landscape. Beautiful Bike with an glourious sound. No one needs more than this.
Nice Sound love it
The Gear Indicator works very nice.
+Khiem Dang
Yes, it works fine. It is only a small delay between each shift, but I do not care. It's nice not having to check if you have put in sixth gear or not.
Sounds godly
MTLFAN11
:
Thanks!
Awesome! More more more videos?
Guten tag!!! Gute road!!!!!
Hello!Which housing do you use for the camera?I have the same camera(and thesame bike :)) but the wind noise is terrible even with the waterproof housing.
I had low one on my bike. It helped a little. Dont get to excited. :-(
Do you still have the cat in? and do you have the arrow low or high mapping?
Nice sound !
Yes, I still have the cat in and I have the mapping for Arrow high.
Thank You!
what kind of exhaust muffler do you have, because it sounds great
Kazimierz Nowak:
The exhaust muffler was Black Stainless Steel with carbon cap from SC-Project.
Hi, I bought a speed triple year 06 1050. And how the lights above the tachometer flash in this video. It flashes for you from 8000 rpm to 10,000 rpm. It starts to light up on my motorcycle as early as 3000 rpm and at 5000 rpm the whole field is already lit and it doesn't change. Is it possible to set or change it? It's pretty annoying because it keeps shining. Thanks for the reply from anyone
torreto torreto:
I found this online. See if this works for you.
Setting Gear Change Light Limits:
To reset the gear change light settings, turn on the ignition only. Press the 'trip' and 'scroll' buttons simultaneously for 4 seconds. After 4 seconds, the tachometer needle will move round to the last set position and the word 'tAcHo' will appear in the clock display. Press the 'set' button for 4 seconds. After 4 seconds, the rev limit will be set to zero. Pressing the 'set' button again at this point will turn off the gear changelights. To change the setting in increments of 1,000 rpm, press the 'scroll' button. The first press will start the setting at 3,500 rpm. Each individual press will then increase the settings in increments of 1,000 rpm. When the correct setting is shown, press the 'set' button to confirm. The setting can now be changed in increments of 100 rpm. When the correct setting is shown, pressing the 'set' button will confirm the setting.
@@TheJocke77 Thanks for the answer, I was looking for it and I didn't find anything, I guess I asked Google wrong. Anyway, I'll try and see ...
No, they are removed.
What a beautiful place!
What country and locality is this?
Diney Silva
:
Yes, this is a really great road to drive.
It's one of my favorite routes.
This is located in Sweden.
Perfect vid to sell me on Speed Tripple
Hi man, did you remap the bike after putting on the sc project cans? Ive just ordered some!
Hello!
Yes, I remapped it afterwards.
Did you try the cans with standard map? What was the difference to the Arrow High map over standard?
PravusJSB No, I did not test the standard map. I went directly to the dealer to remap it after I installed them.
Hi Mr. Speed great sound! I have the same bike (2015). Can you say me brand and model of your gear indicator? I want this want.
Regards.
+Beto Zuñiga
Hi!Thank you. I am very pleased with the sound. My gear indicator is GIPro DS from Healtech.
after you ride do you/your clothes smell exhaust? i got a s3 2006 . and after a short spin. i'm all smelly.
+Ee .e
Yes, my clothes smell exhaust after I have driven my bike. I think it is because of the dual high-mounted silencers.
It would be better with low exhaust mounted.
Är detta i/runt Säffle?
Nej! Det är utanför Vårgårda.
Arrow exhaust?
No, SC-Project.
For videopurpose it's more fun if you use the highrange more :) but damn that's a nice sound!
Très belle Yamaha ;)