Greetings, I have spent days on this problem for various reasons, however to solve your own issue you must make the IP address of the 705 fixed in the radio. Then you go into your router and create a port forwarding rules udp port 40000 to the fixed ip in your radio, then you will hear incoming audio. Regards Tubby
Hi Kerry, I'm in VK also. Anyway I'm trying to use a 4g sim type wireless router, I've added port forwarding 40000 UDP using the IP that's in the 705 but still I can see on an XLX dashboard that I'm getting out but no RX. I'm puzzled as how to create a fixed IP on the 705. How did you do that?
@@markregan24 Hi Mark before you spend hours in Oz this only works for home systems not portable as all portable dongles are double Nat so there is no way you will ever get it to work portable, home is different as all domestic home systems use a single Nat from the ISP, cheers Kerry
@@kerrymckenzie4975 Hi Kerry, just as I thought, even when using a 4g sim wireless router. I can do it no problem when connected via USB to Doozy on laptop which is wireless tethered to router or even a pocket WiFi. That was puzzling. Thanks for your reply. Cheers
CQ UK now terminal enabled. XLX922E - set up video on my QRZ page M6DPS . Under Terminal Mode Setup Guide. There’s a few settings you have wrong. If you come into XLX922D I’ll wait for you there.
Silly question, I have my 705 connect to doozy and all receives OK but would I still need an antenna connected to the radio although in terminal mode to transmit?
@@HamTechRadioScannerDrones tnx for feedback... i know this is more advanced, i have used ours too :-) there is some config on the ic-705 in the ip setting and so on. i just hope you will make some videos about that. I have forwarding udp on the router 400000 and 3 ports but i dont get nothing on the radio but i am conected tru wifi....
I still cant Dstar working no matter how hard I try. One of the most convoluted rediculously technical things to setup. I got DMR running in about 13 seconds from the fist time I seen how to do it. A week later still cant use terminal mode in any working order.
Same here, and it's 2 years later I'm trying with my new 705, I can connect to 1 XLX reflector without issue but all others I've tried give me the red x and won't connect. Fusion is so simple compared to this.
Greetings, I have spent days on this problem for various reasons, however to solve your own issue you must make the IP address of the 705 fixed in the radio.
Then you go into your router and create a port forwarding rules udp port 40000 to the fixed ip in your radio, then you will hear incoming audio.
Regards Tubby
Hi Kerry -Many thanks
Hi Kerry, I'm in VK also. Anyway I'm trying to use a 4g sim type wireless router, I've added port forwarding 40000 UDP using the IP that's in the 705 but still I can see on an XLX dashboard that I'm getting out but no RX.
I'm puzzled as how to create a fixed IP on the 705. How did you do that?
@@markregan24 Hi Mark before you spend hours in Oz this only works for home systems not portable as all portable dongles are double Nat so there is no way you will ever get it to work portable, home is different as all domestic home systems use a single Nat from the ISP, cheers Kerry
@@kerrymckenzie4975 Hi Kerry, just as I thought, even when using a 4g sim wireless router. I can do it no problem when connected via USB to Doozy on laptop which is wireless tethered to router or even a pocket WiFi. That was puzzling.
Thanks for your reply.
Cheers
CQ UK now terminal enabled. XLX922E - set up video on my QRZ page M6DPS . Under Terminal Mode Setup Guide. There’s a few settings you have wrong. If you come into XLX922D I’ll wait for you there.
Hi I have outgoing ok but on the icom 705 i hear nothing , i will join 922 on my 5100 give u a call thanks.
Silly question, I have my 705 connect to doozy and all receives OK but would I still need an antenna connected to the radio although in terminal mode to transmit?
Hi no but I always add a dummy load .
@@HamTechRadioScannerDrones OK Thank you.
Is this reflector still active ? doesn't connect for me on the 705 I jst get a red x
I prefer using Doozy .
Cheeky request...when u get it all sorted will u do a start to finish video as I get my license next week from Ofcom😁
Yes no problem .
Check out Doozy
www.pa7lim.nl/doozy/
how do find the right gateway ip adress? you put david capello in, why?
I used his connection not sure if its active someone needs to run a server to make this work in terminal mode .
@@HamTechRadioScannerDrones tnx for feedback... i know this is more advanced, i have used ours too :-) there is some config on the ic-705 in the ip setting and so on. i just hope you will make some videos about that. I have forwarding udp on the router 400000 and 3 ports but i dont get nothing on the radio but i am conected tru wifi....
I still cant Dstar working no matter how hard I try. One of the most convoluted rediculously technical things to setup. I got DMR running in about 13 seconds from the fist time I seen how to do it. A week later still cant use terminal mode in any working order.
ua-cam.com/video/yBr_-LrZ-JI/v-deo.html&ab_channel=DIGITALHAMRADIODIARY-M0FXB
Same here, and it's 2 years later I'm trying with my new 705, I can connect to 1 XLX reflector without issue but all others I've tried give me the red x and won't connect. Fusion is so simple compared to this.