Peugeot 208 Headlamp Bulb Replacement - DIY
Вставка
- Опубліковано 9 січ 2019
- In this video I show the step by step process of how to change the dip low beam bulb on a Peugeot 208
If I helped ya out and you would like to buy me a drink ko-fi.com/gerardburke
Link for Phillips Headlamp Bulbs - rover.ebay.com/rover/1/710-53...
Thanks to everyone who watches my videos, Likes, Shares and or leaves a comment. I appreciate everyone of you.
Tool options that I recommend and use. www.amazon.co.uk/shop/gerardb...
➢ To support the channel / gerardburke
➢ For business inquiries Email : gerardburkebusinessinquiries@gmail.com
Disclaimer:
GerardBurke is a qualified motor technician who has completed modules & courses in manual handling and all aspects of workshop safety. These videos are not intended to be used by anyone who is not trained and or qualified to carry them out.
Due to factors beyond the control of GerardBurke, I cannot guarantee against improper use or unauthorized modifications of this information. GerardBurke assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GerardBurke recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GerardBurke, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GerardBurke.
#HowToReplace #HeadlampBulb #Peugeot208 - Авто та транспорт
![[DIY] PEUGEOT 208 BRAKE BULB REPLACEMENT](/img/n.gif)
For offside bulb, take the fuse box cover off. You can easily get a screwdriver on the top of the plug and finger at the bottom to prise it off the bulb.
You've saved my life mate!! Halfords told me I'd have to take it to a garage to have the headlight taken out. I followed your video and did it myself. Cheers!!
Absolute lifesaver. Just fixed my light bulb now, thanks to your video.
It was the left side though, so it was a tricky bugger to do 😂😂
Top vid. Fiddly as all hell to do, but only took me ten minutes thanks to this vid. Cheers fella!
Amazing, cheers mate. Will buy the bulb later and install it
Cara, salvou minha vida mostrando como é por dentro. Vlw msm.
Thank you very much.. No place to work but after your video I will try
Excellent video though please note to replace the offside headlamp bulb (as I did) the access is more restricted by various engine parts, HOWEVER with patience and the aid of a small pliers it can be done as I proved. Thanks Gerard Burke for a very clear and useful video which saves time and money!
Thanks Stephen for your comment
Hello, my offisde dip light needs replacing, this video shows its not that hard but as one said, he had to do the offside/passanger side one. There is a fuse box and others in the way making it hard for any hand I think to work in, can I unmount them to make work easier? Many thanks
Thanks, used this video to just fix mine. Bought a bulb for 1.50 from gsf. 5 minute job 👍
thank you guys, your video was 100 times simpler than the french videos!
Thank you Ferhat
@@GerardBurkeBurkesGarageav tried an followed ur vid but the lights can’t coming on with new bulbs an advice
Thx for the vid mate !
Very much appreciated 😉🙂
Cheers Matthieu
Best video for replacing headlights iv seen
🙏👍
Thanks for the instruction I appreciate your help
Thanks for the kind words 👍❤️
Thanks for the video !
I saw a * tiny spring latch* on the bulb before releasing the bulb itself (on a year 2015 facelift model -Malaysia local assembled )
*remove the spring latch*, and you will be able to take out the bulb
Same on my 208. 2016
Great video!
Man, my hands didn't quite fit in there, but it worked, somehow. Thanks for the video, couldn't see what I had to do otherwise.
Thanks for your video, very clear. I saved some money 🤑
🤗👍
Thanks a lot! I changed it myself!
👌👌💪
Thanks for the video
Holy shit dude, you’re a lifesaver!!!
This video is pointing out changing long-distance (Full/high beam) bulbs and I was seeking the other, main (normal) bulb replacement process.
Great vid! I don't know if I can do it though. 🐸
Brilliant thank you.
My bulb went yesterday so I shall be using this video to help me change it.
Hope it helped Natalie.
Changed my offside dipped light today as it was blown out. Tried to change the near side but can't reach in there. I have 2014 model 208. How difficult is it to remove the headlight assembly so i can reach?
What about the left had side? Does anyone have a video for this? Its a nightmare to get to on the 208 model.
ive the same problem looks like the fusebox has to come off
Lol same here
My hand is too big for the left side
Headlight has to come off
Everything on this car is a nightmare ... I really like to see engineer who did this car replacing this.. He didnt think...
What lights is good for the side lights for white
Nice to hear that Roy from Reynholm Industries has branched out of IT support into car maintenance. Has he tried turning the car off and on again?
😂😂😂
I managed :D Thank you so much
Great job! Thanks Sylvia
Thank you - just done this on my sons...was it designed for someone with hands of a 2 year old!
Hello, can you please tell us what exactly bulbs did you use for the back.side.?
Hi my husband changed his last night but unfortunately It only works on full beam now any ideas what he's done wrong??
As a general comment, if you have a problem with the side of the fusebox I had the same issue, a friend of mine used a screwdriver as a lever because the thumb could not fit in, and it works.
Absolutely listen to this advice, worked for me also. Unless you have hands like Jeremy Beadle you aren’t going to be able to this clip off without a screwdriver or something similar to release the top part.
Helpfull thanks.
Thanks for the kind words
Perfect
great vid but wondering what's the smaller round light next to it called and does it use the same bulb? Mine has just gone :/
update: as someone just liked the comment... takes the same bulb but still no clue what the light is called! :)
@@idiotbox7 Are you talking about the daytime running lamp? That should be a W21/5W!
It actually says so on the plastic holder thing you pull off with the lamp ;)
Really helpfull
Thank you
Original headlights are VALEO?
Plz the dimensions of the light the big circle ?
Trying to do the passenger side dipped and lost the bulb clip/spring! Any advice??
You can get a clip or replacement spring from eBay.
How to change on the other side?
Thanks a lot
Your welcome
HI do you have one on how to change the drivers left hand headlight, everything we see for the left is for a 308 and cant find anything
It's a bit more complicated because of the fuse box. It's freaking hard to fit your hand in there to detach the connector, so use a plier
Probably a silly question but do you need to disconnect the battery first or can you go straight in?
No need for that.
Just don’t turn on the lights when working on them
Thanks
GoodNTight......indeed...... at least you just need to push inward to lock the bulb...
How come you pull the bulb out at 3 o'clock or 9 o'clock but put back in at 12?
His camera is not straight and that’s why he put an arrow pointing to the “Top”
By any chance can you do the DRL for peugeot?
I record and edit problems/jobs that come my way in the workshop, if it ever does I will but where I live currently in Australia has very limited amounts of Peugeot's on the road.
@@GerardBurkeBurkesGarage thanks so much I appreciate it!
My hand is a bit big to remove the one on the left...the fusebox is on the way
👍
Can you take the head lamp out?
Yes you can by removing more parts but no need to. It is not a designed headlamp for easy removal so useless the light is damaged etc.. it would not be option in removal of a bulb.
Its a massive ball ache doing the passenger side not a lot of room to work
Easy enough but when you accidentally unclip the little metal holder on the side where the fuse box is then your in for a long one. (Ask me how I know)
How?
Yes this one is simpel.
BUT, now the other site.! ! ! ???
.
Yes, the tricky side
Capo
Unless the beams are switched on UK models, the exterior is high/full and the interior one is the low/dipped.
Not on my 2014 model 208 (also UK). It's the same as in the video. Maybe you have a newer year?
@@RozumUniversalRobot In that case the beams are switched. Mine is 2015, EU model and the beams are as I stated above.
You didn't do the left part which is much harder
PIUGIOOOOOOOOO
The left side is Impossible
Krisztian5HUN why?
@@jakospanu bcause the fusebox and no room
I hear taking the fuse box cover off helps somewhat
@@furtivedig fake news lol
@@Krisztian5HUN lying bastards! I remember changine bulbs on a 147 was a pain in the neck as well.
just find difficult to unplug the right one, there's no space for the hand
Great Not searcing for fixing. Just Push......
I wish I could see the designer's mother or sister
I changed but until the end I was swearing to him.🤬
This is a pain in the arse of a bulb change believe
Muy malo para mostrar
Thanks