GE Washing Machine The Replacement GE Model GTW330ASK4WW
Вставка
- Опубліковано 26 сер 2024
- The replacement washer is just as bad as the first one! Still not pleased!!!! I purchased the GE Model GTW330ASK4WW Washing Machine this month. This review shows my first uses with the replacement machine. The first machine made such a racket during the wash cycle that I called Lowe's to check it. When the service people came out to inspect the washing machine, they told me it was defective and that I needed a swap out. Nine days later, Lowe's delivered a second machine from the same line and model number. This video shows that the second washing machine appears to suffer from the same problems. See the first video here: • Washing Machine GE Mod... I have more videos on the subpar performance of this GE washer.
For specs on this GE Model GTW330ASK4WW washing machine, go here: amzn.to/2FGqK6O
My faithful Kenmore washing machine was 14 years old and stopped emptying water during the spin cycle. See my video asking for help: • Washing Machine Won't ...
I attempted to repair the Kenmore washing machine series 80; the video may be seen here on my UA-cam channel: • Washing Machine Repair...
My other videos on this GE Washing Machine
Washing Machine GE Model GTW330ASK4WW Review | TERRIBLE Product!
• Washing Machine GE Mod...
GE Washing Machine The Replacement GE Model GTW330ASK4WW
• GE Washing Machine The...
ASMR | Loud Washing Machine | Off-Balance Load | by Kim Townsel
• ASMR | Loud Washing Ma...
Tangles Clothes! GE Washer Model GTW330ASK4WW Rant | KimTownselUA-cam • Tangles Clothes! GE Wa...
Washing Machine Tangles and Travels | GE Model GTW330ASK4WW • Washing Machine Tangle...
Support my UA-cam Channel and Creative Endeavors
paypal.me/KimT...
It is free to like subscribe, leave a comment, and share. UA-cam is free!!!
#WashingMachine #GEModelGTW330ASK4WW #GEWashers #GEWashingMachine #Appliance #Washer
Just me expressing my thoughts and opinions. Watch the others in the series #1000Days #KimTownsel #KimTownselUA-cam
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
Kim, I called the GE for the complaint and then BBB if they don't make this monster machine right, I"M going viral they are going to send me a seventy dollars for the laundromat till its resolved,
Good!!! Please keep us updated on this. I support you 100%!
I bought a similar GE seven years ago along with the matching dryer. Yes the washer is loud and makes weird noises but after seven years it still works perfectly and my clothes always come out clean. Dryer is also loud but still works great.
I’m watching this as the same one is in the background in the laundry room making the same sounds . I thought it was broken at first. But it works just fine . I like it
I think I am getting used to the noise. It was shocking at first. I could not believe that a washer I bought over a decade ago would be better than one bought in 2018.
Thank you for this honest review. Just got mine Saturday and it sounds just like yours! I thought something was wrong with the agitator. I walked back and forth just to check on it. I don’t have time to babysit a washer machine. I wish I had watched your review first! The dryer is ok so far. My only problem with the dryer is that it has a buzzing noise that sounds off when they’re almost dry. Thanks again ❤️
Thank you!!! I do not understand why modern appliances have to be so noisy!!!
I’ve had mine for two years and works just fine, mind you it gets used twice as much simply because it’s two families living at this address. If anything it gets a break like once a week, we’ve had no issues whatsoever.
Thank you. Does yours make the same noise at mine does? I'm just wondering if that noise is normal...
@@KimTownselwe just got one (wish we did some research before) and it makes that annoying noise that yours does
You're 100% correct. GE should be ashamed to sell this product but they obviously are not because 3 years later the product hasn't improved one bit. Truly amazing that something like this could go through an entire design and QA process and this is what they have as a finished product? I just bought the same machine under the Hotpoint badge. Same piece of junk. My laundry area is on the second floor and you can hear the dying animal noise all over the house which is a total non-starter. And it just doesn't clean well, which is the whole point of a washing machine. I'm sending it back and replacing it with a Maytag commercial washer.
Hi Kim,
I bought the 2019 version of your washer and the matching dryer; it was delivered about two weeks ago. My Samsung dryer drum “only seven years old” split. I decided to replace both the washer and dryer-the Samsung set put me back nearly $2,000.00 USD., in 2013. I must say I am very impressed with this GE washer; it cleans far better than my high-end Samsung and the matching dryer dries in half the time. It used to take an entire day to do all of my clothes and bedding, now it’s complete in an afternoon-and the items come much cleaner. In truth, the machine is a little louder, but it doesn’t bother me. I have a four-foot-long velvet finish pillow, the Samsung could never get clean, now it is shining like brand new. I must say it’s been over a decade since I have had an agitator, and I love it. In your video, you questioned where the detergent went; I have wondered the same thing too. Occasionally, my detergent vanishes. I think it runs under the agitator. I enjoyed watching your review, and I am sorry your machine doesn’t live up to your expectations.
p.s.
I find that pushing the start/pause button works to pause without needing to hold it for any period of time.
Thank you!!!
I own this machine as well and it’s actually pretty good at cleaning clothes. Regarding detergent, I’ve noticed that (at least for me) rarely does it end up below the agitator. Found this out when I pulled out the softener dispenser and looked inside the agitator. 90% of the time we use powder detergent so maybe that’s why it doesn’t go below the agitator. Ever since I found that out, I let the washer fill up a bit before adding detergent.
I have a washer similar. Its works. My smelly clothes came out just as fresh and clean as with my old worn out machine would do. I have no complaints about it. Less water
Mine is horrible!
Kim, I am a professional appliance repairman for over 26 years --YES!! you are correct utter TRASH! These newer models (most of them) are utter China parts made disasters! Give me the old great 2000-2007 Whirlpool or Kenmore washers over this anyday.
GE set this in motion back in 1995 when they stupidly discontinued their filter-flos.
What's your recommendation to replace this washer? I hate this model 🎉
@@kimdecovich1198 There are two basic kinda "old style" washer that seem ok. Amana and Roper. They both are on lower end price and have the agitators inside. Although they still have the standard computer crap, they seem alot better in simplicity and repair friendly. Both can be usually purchased at Home depot or Lowes.
I bought this model 6 months ago . So far the machine does a fine job . The spin cycle spin so fast I thought it was going to hover like a ufo . Clothes come out so dry they hardly need to be put in the dryer. Kim I hope this helps you , after you set the washer push strart and leave it alone . If you just wait it will do its thing . Pushing buttons prematurely will confuse the electronics. Please let know if this works for ya 💕♥️😱
You are so right about the spin cycle. It is fast, loud, and thorough. You are also correct about pushing the start button and just leaving it alone. Thank you so much for leaving us a helpful comment.
EXACTLY....people need to learn to WAIT. I have a part time cleaning business, we do a lot of Air B&B's and corporate condo cleanings, somehow the owners and clients are always calling us about the washing machines....usually inpatient, middle age to older white women in a frenzy asking why the machine is not working, 9/10 times it's because they start hitting buttons or trying to change cycles thus causing the sensors to start timing in and turning off the interface for a minute while it starts to program. . I tell them to "hit the start button once...and WAIT 5 minutes". Almost ALWAYS it goes back on starting whatever cycle is programmed.
Girl I feel u, right now I'm going through the same thing. This is the noisest washer I've ever seen . I HATE this machine and I've had three different repair men come and check it out. You have to put ur water on bulk to have enough water to wash ur clothes, a hand full of water do not clean ur clothes. And I'm stuck with it. Please people Don't buy this GE washer. The man that came out yesterday heard it was Loud so he thought I needed a HUB and left and said they would call me when the part came in. He came right and said this machine doesn't have a HUB, so he look under it and said their was a lose nut on the transmission shaft. Still loud. I'm pissed my first time buying a new washer and dryer. Mind u I got it February of this year and have two more payments on it.🤬
I love mine it makes a lot of noise but cleans very well and clothes come out almost dry...
I think I am getting used to the noise. It was shocking at first. I could not believe that a washer I bought over a decade ago would be better than one bought in 2018.
I just bought one and I thought Something was wrong it but I see that's just how it sounds. I just want my clothes clean on the first wash and it does a great job.
Things that make noise are usually doing it's job. REally not an issue unless you are running loads ALL day and night. People are just looking for things to complain about....it's a friggin washing machine, after I shut the door I can barely hear it....and only lasts for about 45 minutes. My AC makes noise, so does the tv, dishwasher, kids, dog and people working in the street, Oh dear the world is a LOUD place.
The manuals seem to warn people of the noise now. I just got a similar model a few days ago, and when I read the manual, that was one of the things I saw.
Same, i was surprised that i could actually have a washer with a brand that i could trust
Whirlpool washer is the best... My whirlpool just went bad, it was 15 years old... Now I have the one your reviewing... My new washer is quite to compare with the old one...
Thank you for the information!
Oh my. Thanks for sharing I was just getting ready to purchase one. There is no way I would put up with a machine that sounded like that!
It's loud but I just got it, sister and cousin have it and the clothes always come out awesome!
Thanks for the info,weird looking agitator and this washer is louder than a pinball machine.The buyer should be allowed to hear the machine cycle @ the store before buying and trying @ home .
Agreed. When I got home with it, then instruction booklet had a QR code where the buyer could listen to what the normal washing cycle stand a lot. However, by then it was too late to be helpful for comparison shopping because the consumer had already purchased the product.
It would also be nice if the person that sold you the washing machine had knowledge about it so when you went back to ask questions they could help. Definitely not a fan of this washing machine.
@@KimTownsel nice washer
I have the same exact washer not having any problems with it...
Jake Ringer give your GE washer 8 more months. :)
I just bought the washer and dryer and I just used it for the 1st time (the knobs have extra cycles now) It is a bit on the louder side but my water was filthy so I know it cleaned the heck out of my clothes (and that's what matters to me) and it's in the basement so I don't care.
I’m with you, the old whirlpool/Kenmore units were pretty good and easy to work on. I’m a handyman and I do work on a lot of things. Here’s my advice-
Washing machines and dryers are something you’re going to need all of your life unless you plan to do them
I elected on my next purchase to buy laundry mat grade washer, and dryer
Or even buy a used laundry mat washer and dryer they are quicker. They work well and they are bulletproof.
Here is my past story
I had always had Kenmore Whirlpool washers and dryers the old-fashioned style and they were always reliable and easy to work on
The residential line of front loaders came out. I bought a pair of LG.
They were absolutely wonderful they had a 10 year warranty and they lasted 10 years. They didn’t use very much electricity or water and they did a decent job and were relatively quiet
At 10 years, I begin to have problems with the dryer in the washer so after trying to fix them and them not lasting much longer plus they were hard to work on a set
So this time I bought Samsung front loader residential line, the washer is about the same same as the LG as far as the way it works and operates however, the dryer after it’s done the clothes continues to run and operate with all the lights off, I was told it’s a defective relay in the board and they want $300 to replace this at expense still under warranty
If you’re buying residential, Bosch is the way to go !
But I would all always go commercial laundromat quality
I just bought this one used and I was as shocked as you with the heavy cycle pathetic pausey action. Unbelievable.
dont waste your money on these new machines. The older machines are the way to go
It seems that way.
Where to go old style? I am searching around nothing. Thanks
Try a Speed Queen TC5
@@pgc476 used appliance stores
I'm sorry if this comes off as rude to anyone here, I purchased a GE GTW465ASNWW in this family that sounds exactly the same...
What machines are you guys coming from that find this *sooooooooo* loud? Do you sit near your washing machines the entire time they're running? I just truly don't understand, as far as a top loader goes this was on par with the noise of the Maytag commercial we also considered, it isn't much louder than the front loading Samsung it replaced. We have a house that isn't great in terms of sound deadening yet with the door to our laundry room closed you'd be hard pressed to hear it.
Aside from that...
Your issues around 5:15 are purely due to not reading the manual/taking the time to understand how this machines operation differs from your previous. To explain the reasoning behind some of what you're complaining about (which is explained in the manual). This machine *will not* start a cycle until the lid is closed, if you start a cycle allow the machine to fill, and then don't return within 10-15 minutes the machine will drain the water and you'll need to restart the cycle. Pressing the start/pause button doesn't turn the machine on, opening or closing the lid, changing one of the selector knobs, or pressing the deep fill (deep rinse in the case of your model) button however will. Later with your "no lights are on comment" the machine runs a quick test to make sure both hot and cold water lines are connected (the two quick bursts of fill water you hear immediately after pressing start) then after that (about three-five seconds) the fill light will illuminate as yours did. Unless your're incredibly impatient I fail to see the issue.
Nothing against you, but I dislike seeing people complain about products when a bit of patience and manual reading to understand the product can correct most if not all the issues.
great point
Washing machines are loud machines. All I care about, does it clean my cloths and doesn’t break in 5 years like my top load no agitator washer has!!!
I got the same machine less than six months ago, and experiencing the same thing
Hello! So Lowes just delivered my GE gtw335asn2ww….I was on phone with GE support immediately as I have never heard a washer make this noise!! The rep said it’s normal for the agitator to sound like this!! So I feel a lil better after watching vids, I guess. But Ugghh, the noise!!! I wanted a washer most similar to my old one, but I’m just not sure about this one!
She’s spot on right.
My second one just shot craps after 3 years. The previous one lasted only 3 years as well. Both purchased new from Home Depot. It’s off to Lowe’s later today. I’ll be getting something else.
I just left Lowes. Bought a Maytag on sale. No more GE.
LMK how you like the Maytag, if you don't mind.
@@KimTownsel will do.
@@KimTownsel I received my Maytag washer yesterday. Manufactured by Whirlpool. Ran two loads through it. I barely knew it was running as its so quiet. The delivery men said the G.E.s are junk, and that this Maytag will be more durable with normal use.
I also received a new flat top Samsung self-cleaning oven.
I had identical problems with the G.E. matching dryers. Blew through two of them in six years. Two years ago I purchase an Amana dryer, also manufactured by Whirlpool. Seems to be holding up under normal use as well.
Lowe’s has good pricing on major appliances, but I’ve found their customer service to be not so good.
@@tubalcain6874 Thank you so much for the updates. In the past, I have had such good experiences with GE but based on these last two GE washers, as well as the high number of other viewers on my GE washing machines, I will not be buying another GE appliance.
It will begin to start walking forward within 3 years of ownership, after this model and 2 other cheap brands I did the research and saw a lot of comments saying the Commercial/Residential line of Maytag (about a $1000 US) beware of the cheaper digital model, the Commercial one is from the same line as the laundry place without the extra cost of the coin box, very solid,... So far so good, easy analog dials with extra rinse and presoak options,, almost old-school but strong motor and belt and gives you a true half and full tub of water instead of the High Efficiency models Congress passed a law some years ago restricting how much water went into the wash, usually the top stuff felt dry still, the one you reviewed here failed us badly as with several brands before, so the Commercial Maytag model is coming out on top even over those front loading GE etc models at twice the cost at least.
So I disagree about the Commercial Maytag. I have had the same problems this lady is having . Within 6 months, they had to replace the tub and motor. Now, the sensor is out. Always noisy! Im replacing mine. Tired of dealing with it. Bottom line, everything but speed queen is a piece of junk. I cant afford, unfortunately.
GE washer is a joke, I just bought one and the noise is killing me.
I just bought the 335 version of this same washer and I’m pretty happy with it. I don’t think it’s the same quality as the 30 year old washer it’s replacing but if I get at least 10 years out of it I’ll be happy enough.
The sound is actually a special feature of this model. It's in direct contact with the Federal early warning disaster system. So if you hear that comforting claxton like sound, head for the nearest bomb or storm shelter.
you are lucky ,your machine is still working . My machine broke down in 13 days now it has been down for a month+ no replaced allowed
WOW!!! That is not fair.
I've had mine for 3 years and I'm having so many problems it's unreal
Mine makes this noise I literally came to UA-cam just to hear if it was just mine
Apparently it is "normal" and we are just supposed to accept this as "modern technology." :/
Me too wow! Thank you for sharing the information.
Lol thats why i am here
Me too 🤣🤣
Same I got scared because I barely swapped it because the other was making a squeaky sound 😂
I had a GE it only lasted for a month you should get the lg top load washer
Kim don't complain don't you have the best of everything
I had a 20 year old washing and drying machines. I had to replace both. The washer for some reason was not washing the clothes like it used to and the dryer was burning the clothes. The laundry room has limited space so my husband and I went to Lowe's and purchased a GE model GTW465ASNWW washing machine along with a dryer GE model GTD42EASJWW. I don't mind the noise.You can't hear it when the door is closed. Thank goodness for that, my husband works at night and sleeps during the day. I only 2 issues…
1. It has five knobs, none of which do what I want (LOL). I want is to skip to the rinse cycle. Not possible
2. For some reason I cannot for the life of me figure out why I can’t smell the fabric softener or the lovely smelling Downy Unstoppables after the wash is done. My clothes seem to come out smelling like that new washing machine smell. Yuck!
I wish they made washing machines the way they use to. I miss my old machine when it worked well.
By the way the dryer is awesome.
I have same model, but ends in 2WW, everything else identical.
This machine is a complicated mess, the clothes at times comes out with small dry areas that look like never made contact with water. Not to mention..there’s a trouble shooting code sheet taped under inside side panel with which to help one determine what’s causing issues that will arise, in our case it stopped spinning, because the lid lock broke…again a UA-cam clip saved the day.
Agree with you…wouldnt recommend to worst enemy. Used to love our old GE washer from the 90s. The last 2 only got worse.
Don’t slam that lid.
the washer was working perfectly fine, it is a good washer, but you might have to get used to the new sounds.
I have the exact same model and I understand what you are saying as I was confused until I started understanding how it works and what's normal. I don't like bells and whistles or electronics but government regulations force the companies to make them this way. Next time I will look for one with fewer options.
This the way my Maytag bravos sounded. I have recently purchased this and have no issues. It’s belt driven. You need the direct drive they are quieter I think you will like it better
Thanks for the info!
They all sound like this unless you splurge for the $700 plus machines. You are correct about the belt driven machines. I do know that direct drive is more sturdy and expensive, but belt driven ones can be easily fixed for cheaper, thus overall can last longer if you are willing to repair it if that goes out. Anyway, you get what you pay for, all machines now are built to last 3-5 years....and unless you pay about $300 more, you get a little more noise. I just bought a GW 4.5 Cu ft, it's probably louder than this one, but who cares! it makes about the same noise as my dishwasher in my kitchen. Two loads a week comes out to about two hours where I have to deal with this noise. Seriously not an issue to me.
My wife bought one just like this Saturday. I liked my old one and I think I could have fixed it. But the paper sticker with the ser. and mod. numbers had faded / washed away. And your SOL if you do not have them. Not impressed with this thing. Hope you were able to get yours fixed or find one that you like.
in March 2011 , an article titled "How Washington Ruined Your Washing Machine" was posted in the Wall Street Journal. You can find that article online. Just do a search and read it. Basically , the EPA has an obsession with energy and water efficiency. Since 1996, the EPA has continually increased energy and water efficiency standards for appliances and manufacturers have to meet those standards. The result : Every appliance you shop for in America is designed primarily to use less energy and less water , even if that means compromising performance.
true we need to fire washington
Thank you, James!
It's still happening today. Nothing has changed!
The older ones are the Best anything made by Whirlpool is good
Thanks!
I'm also looking for a descent working washer, I've not found anything other than those commercial grade washer , and those todays commercial grade are probably not as good as those very common washers from the 70s. Very soon people will have to start washing by hands, back to square one.
thank you so much for posting! saved me the money :). I bought an LG top loader with no agitator a few years ago and was so unhappy...clothes come out dirty still. Looking for something better but not super expensive.
Glad I could help! Let us know if you buy something that works.
I bought the one with no agitator, just the open tub. We put the dry detergent on top after loading. It went through the full wash cycle, opened up the lid and the soap was still ontop. Still dry!
Just like you, we ended up with this machine, if we don't start the water add soap, and stir, we get soap residue on the bottom clothes.
Forget washing large sheets, comforters, and blankets.
I use the highest water level no matter how many clothes, towels, or linens. When I used their water levels, the laundry barely was damp. :(
@@KimTownsel It's not you, we've went through at least 10 different washers. Exchanging them, returning buying different models. All from Lowes.
Another dirty lil secret, every washer we returned, exchanged, was placed back out on the floor with a 10% markdown, and sold as scratch n dent...
@@vegascolors WoW!!! 😟😦😢
I own this same embarrassing washer. It says soak in the dash but apparently it's not really a feature on this model
I’ve watched other videos of this washer and this is what it sounds like. My plumbers wife has this machine and she said she’s pleased with it.
Thank you very much! I think I'm just going to have to get used to the noise. It seems to be cleaning my clothes well.
I have had this machine for one week and now it won’t fill with water. Piece of junk!
I have a GE washer and dryer. I agree its noisy. My question is the rinse cycle. Its does not fill up to remove the soap. Is it suppose. What I get is spraying while it spins and drains. I can't believe that it removes the soap on clothes. I've had 2 companies come the first said it doesn't have a rinse cycle but didn't know how to fix it. The next one said don't put too much soap only 2 tablespoon of soap per load. I can't believe that's would take care of problem.
Hi, ty for doing this video and sharing the way the washer works. I seriously thought my washer was broken and am trying to find a way to make it quieter when washing. I am sorry for the other issues you have with yours though. I think GE should give you a full refund and you should be able to get a diff brand 1 and hopefully that will work better for you. I dont mind the pauses it does for the cycles, I just dont like how loud it is.
Thank you, Lori. From what I have learned from others, this is just how "modern" washers sound and function. Disappointing. Thank you for watching and leaving a positive comment. 😎
GE won't trouble shoot over the phone. You need to schedule an appointment $$$!
Maybe I should state the ONE and only thing I like about this as a washing Machine. It gets my clothes clean when I get it to WORK right. 😂😂😂The sound is weird to me too. My house must be well insulated or I’m going deaf my old age but the volume doesn’t bother me just everything else about it. My old washing machine was 35 years old so it’s been a long time so maybe they’re all like this I don’t know but I agree with you hundred percent I do not like the washing machine. I would not recommend it to anyone. I like to add water and agitate for a little while to mix my detergent then put in my clothes then have it fill the rest of the way. I don’t think that’s a possibility with this washer. Thank you so much for putting out this video.
PS I am old hahaha and I do have a hearing problems but now that you mention it all I heard yesterday was that weird sound coming from my washing machine! I chuckled every time I heard my washing machine. So if it helps you made me smile quite often yesterday. 😂🤣😂
That General Electric washer looks awesome and it sounds good when it’s washing dirty clothes 😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎
I have this machine. It works fine. I recommend always use deep fill.
I do. Otherwise the water level is far too low to sufficiently clean our laundry. I still have it but it is unnecessarily loud and creates vibrations through the floors.
@@KimTownsel mine is in basement so i don't really hear it. Turn up the music. ;-)
I absolutely hate the new washers they are building now. I was able to obtain a new Speed Queen back in 2017 before they made the design change. It has the old-school agitator and wash style. I'm glad I bought it before 2018, because from what I understand, everything after 2018 sucks.
The GE Filter Flo washers from the 1960's through the early 1990's were the best! I loved those!!
They are all bad today. Every last one fo them! I see the old ones go, and I want to cry!!!
It is sad, isn't it.
we've had this same one for about 6 or 7 years now its only now giving us problems, "wont actually spin" but from my experience it's the user error and not knowing or trying to learn how to work the product for most people that causes these errors.
Omg!! I have this same noise machine and last night I had a load soaking over night everything was off and at 4 in the morning it starting rinsing by it self I got up and there was no lights on dashboard ..I had to unplug it to stop..this is second time this happened last time water was filling..Im leaving it unplugged..anyone else having same issues???? Scary!!
Same here.
Being a new owner of a new high-efficiency belt drive washer like yours (a model GTW465) I half to say that most of the problems you are experiencing are due to your own error and lack of knowledge when using this washing machine. You seem to believe that this washer will work similarly to your old Kenmore direct drive however, it does not at all. The first piece of advice I must give to you is to always leave the load size selector knob on large or super. Any other lower water level will not cause sufficient rollover in your clothes during the wash cycle with medium or large-sized loads. Also, I recommend that you leave the deep rinse on for every cycle. It will cause the machine to fill and agitate during the rinse cycle like your previous Kenmore and will help to get stains out better. You can activate the deep rinse feature by pushing the deep rinse button on the left side of the cycle LEDs. The machine should remember that you have selected it for future washes with the particular cycle you activated it on, but you can make sure by checking to see if the light for it is on each time. The issue of you leaving the washer after initially starting it and coming back to it with an empty tup is proper functionality. If you leave this washer, or any other high-efficiency washer with water in the tub for more than 15 minutes while the cycle is paused, the washer will cancel the cycle and drain the water. Also, if you turn on the washing machine, leave the lid open, and walk away, then as soon as the cycle starts when the washer finished filling, the washer will immediately pause, and the auto water drain countdown will begin. In addition, the issue of you returning and not being able to cancel the cycle at 5:14 is not really an issue, but moreover how these washers are designed. You were unable to cancel the cycle due to how as I previously mentioned, when the washing machine drained the water, the cycle was also canceled. If this happens in the future, where you return to the machine having drained all the water with the drain pump still running, then turn the cycle selector knob until the LEDs light up. The reason why you can't do anything when the lights are off is because the control panel has gone into sleep mode, and you must input a command with any of the knobs to wake up the control panel to use the start button. At 7:36 this is exactly what I am talking about. You are attempting to use the washer when the control panel is in sleep mode, so the start button was not working. You then open and close the lid, which wakes up the control panel (the LEDs being on indicates it is ready for you to press start), you push start, and it works. You need to make sure that before every cycle the LEDs are on so you can push the start button. Another key point is that I recommend you modify the way you insert clothes and detergent into the washer. You should start putting in your clothes and detergent, even before you start the washing machine and then close the lid before you start it. You should also try to leave the lid closed for the entire cycle. This will eliminate the issue of the washer auto draining the water because you forgot to close the lid and walked away for over 15 minutes. What you hear at 10:07 is the "slow speed" agitation. On some cycles for the last 5 minutes of the wash, the washer enters slow speed agitation before it drains and spins. The reason why the washer does pulses of agitation is that it has no real low-speed setting, so it just pulses the high-speed setting. Practically no new washers have a slow-speed setting built in the motor for agitation anymore. The last and final point I would like to make is about the spin cycle with bulky items and how the washer may seem to go out of balance when it initially starts spinning. If you happen to hear the washing machine come out of balance when it is spinning, here is what you should immediately do. As soon as you hear the tub start hitting the walls of the washer cabinet start counting to 10. If the washer stops banging before you get to 10 and is still spinning, then let it spin however, if the washer continues to bang for more than 10 seconds or stops itself, then you will need to redistribute the load manually. You will also need to redistribute it manually if the spin light is blinking and the washer is just sitting there. This may happen twice during a spin cycle, once when the washer initially starts spinning and again when it goes to ramp up to full speed. Here is an example of one of the washers initially going out of balance, but was able to correct itself in under 10 seconds: ua-cam.com/video/LjPV6Me0OZk/v-deo.html
Thank you for your honesty,
I feel like you. I hate this machine and it wasn't cheap were I live, I have issues you did not address. Just know it's not you this is not a good washer, I feel we all should be given a refund.
.
What is the model number of your washer and what were the issues you were experiencing with your machine? I personally understand what you are talking about. This washer could be made so much better and easier to use with minor design tweaks on the same platform, but as far as I am concerned all new washing machines are like this. If your not looking to get your washer from a tech company and can't find a Speed Queen or used washer your options are pretty much a Whirlpool VMW washer, or a Ge.
Yes, to all this… I was thinking all this while watching. After reading instructions and washing a load or two mine still works just fine and always has. Idk what people expect with a low middle price range.
Hi should this machine fill up on rinse to rinse. Mine just sprays while spinning then drains. It does not fill up. Is that what it's suppose to do?
Mine doesn't fill to rinse.
did you check how much water this fill? mine in whatever load size i select the washer fill the same amount of water its that ok??
I keep mine on the highest level. Hardly uses any water at all.
I bought one also and really dont like how it fills and washes it is quieter than an older one i had but hate that the water doesn't fill up. And gets off balance so much
GTW330ASK4WW Was The Best Washer You Owned In A Long Time
Not at all.
Just bought one with the select water use, reading reviews some good some bad but all the new stuff leaves you with little options. Loves my old Kenmore, lasted me a long time
I wish my Kenmore had lasted as long as I will. :)
Rare to see Kenmores with the agitator now a days. Did you return yours? I’m putting my first load in today, give it a test run.
@@l.m652 I wanted a Kenmore but also wanted an agitator. Our local Sears was closing when I bought mine and the pickings were slim. I purchased one like the one in the video, called Lowe's, and they brought a replacement. Better but still shockingly strange. I still have it. Just can't run it when we need quiet times.
Kim Townsel understand. Bought mine at Lowe’s also, these were on backorder everywhere else. Hope it does it’s job that’s all, the noise being it’s in another room outside I won’t mind. Keep ya posted, thanks for the responses
I have this same machine and I hate it. Mine will start to agitate for about 4 seconds then stop and do nothing for some reason. Then I put it on the speed wash just so I can spin the water out. I have intermittent problems where at times it will start to wash or spin and just suddenly stop after a few seconds. It's extremely noisy on wash and when it goes to spin it sounds like Boeing 737 rumbling down the runway. I would not recommend this machine either but if you get one just be sure that you have a basement, enclosed laundry room , or porch to put it on because it is so loud. Reading and executing the diagnostic codes are also very confusing. I am going to replace it with a much quieter one because i live in a condo where my laundry room is just off the kitchen. I've very good service with GE in the past but this thing has sent me looking at other brands. One positive thing I can say is that it does a good job of cleaning the clothes.
Gosh thank you for this video, I just bought this washing machine. Same thing happened to me, I couldn't stop it for anything in the world! Also, it does NOT NOT NOT add enough water I just don't understand why, what is with these new machines!!!! GE ...HELP!!!!!!
I didn't want an HE because NO ONE should be controlled on which type of detergent to use! I still don't understand how to turn it on! I hate that I can't turn the buttons to re-rinse whenever I'd like! It is loud and whenever I'm washing a heavy load, it practically stops and sounds like it is pausing between each churn!
I'm so UNHAPPY, because there aren't many choices when it comes to shopping for washing machines.... all the stupid washers say HE....that means I can't use the Mexican detergents I love!
I bought this washer because it's not an HE and therefore I can use Ariel or Zote Soap to whiten my socks!
I'm glad that the agitator (medium only) works like a normal washing machine and not in slow motion!!!! Honestly I wish GE will come up with a better NONE-HE washing machine than this weird one and let us exchange this weird machine for a good old fashion conventional one!
That’s just how they sound nowadays 😆 most don’t use a lot of water and have sensors to determine how much water to use :)
Thanks for watching and leaving a positive comment! That's what I've learned... That they just sound that way. Crazy!
@@KimTownsel we are in a new world
Absolutely right. I have the same model. GE should be embarrassed. They used to be a respected company. Not so much any more. The noise is not the only problem. You'll see.
I have one of these and I'm not impressed, even the highest setting of the water doesn't cover the clothes. What good is that? I have 5 gallon water containers that I put into the top washer to get the clothes covered. Again, not impressed.
We have the GE GTW220 (ACK5WW) the landlord bought it to replace the GE that went out. I just left it for a few minutes to get some more clothes, came back, the machine decided to empty out all the water and detergent I had put in, so now I lost detergent, looks like GE is in the detergent business as well. The cycles don't make sense, I read the entire instruction manual, it never says what HEAVY, MEDIUM and LIGHT does, the water temperatures are ridiculous, the water that comes out to fill the tub is never what you select, yes, my HOT and COLD water hoses are properly connected, I double checked them. There is no place to put in the fabric softener. Yes, you heard that right, THERE IS NO FABRIC SOFTENER CUP. So you have to stand in front of the machine and wait... and wait.... and wait... GE should just get out of the appliance business, I'm sure Apple or Toyota would make a much better and more logical washing machine. Machine is pretty quiet, but then again, if you're listening for the water sound so you can run back to put in the fabric softener, the quietness isn't helpful. If this was my property I'd return this piece of shit right back to wherever it came from.
My neighbor just bought a GE washer and she misses her Kenmore 90 series it was similar to your dryer it starting leaking and I was going to fix it for her but I was out of town at the time, I told her to wait for me to come back but she didn’t want to
I wish my Kenmore had worked forever!
Kim you are looking at in contrast to old school washers. These new machines have been tried and tested. They save water. You dont have to soak clothes with mega gallons in order the wash them good. You saturate them and let them move and the filth is loosened up. The rinse cycle does get them really wet to wash out the filth but to saturate the load in lower levels of water is a cheaper way to get them clean like Great Grand Ma used too. Sure lots of water cleanses but its not needed.
I understand about the less water but the machine has other features that are subpar. It is too noisy, it takes too long to wash, the technological features don't allow changes for the cycle, and it gets stuck on a cycle and will not let you change your mind. There is more technological progress than merely saving water.
If this is the best washer machine we can make in 2018. Ha ha. It's year 2023 and we just bought one of these GE washer machine new from home depot store and that loud noise is horrible, I thought the machine was defective, turns out it's made that way. Older machines don't make that noise, so why does this machine have too. Sounds like a distorted Duck quack. 😬 I have looked up other washer machine and it's as someone commented here in the comments 'that other more expensive washer machines are loud too' the only way too solve such a noise problem would be for these washer machine makers to seal in the loud areas of the washer, I just don't understand why older washer machine gears and clutches don't make such a loud agitating noise, instead older washer machine have a harmonious sound that can put you to sleep. However, the job is getting done, I guess that is what matters but it would be nice if the job can get done and not be loud as well. I'M EDITING THIS COMMENT ( I DID MORE RESEARCH) TURNS OUT THE Speed Queen TR7 IS MADE TO BE QUITE COST $1,500
Hey Kim, I’m slowly catchin up haha!! But hey, this is what happens when you buy a new washer that is not a traditional speed queen. As I’ve probably said before go used and when you go used you’ll have to clean it yourself but I would rather clean a machine from head to bottom then have to worry about buying an overprice piece of crap with ridiculous sensors and computers that don’t need to be involved in the washing process of clothes. Plus you’ll save hundreds and hundreds of dollars if not thousands if you buy a used set off marketplace or from other refurbished store some of them you may have to really clean always look for the most pristine mint condition fully loaded models, Whirlpool made and speed Queen along with the older original brand Maytags are the best. Sell this washer and use the money you get from it to get a new used washer I’d say I’m telling you as a technician you will hate anything brand new other than speed Queen TC series, NOT Tr series. You have to go used unfortunately, I went used and have never had any issues with my 1996 beast of a Whirlpool!!!
Thank you!!!
I just found this review because I bought this damn loud washer in November! I was replacing my washer that was bought in 1992 and this is louder than that one lol I do love the space it offers but so confused as to how in 2019, 2020 that our washing machines are this damn loud. I was told at home depot where I bought it that the salespersons expensive washing machine is loud like that too
I agree!!! Dishwashers are quieter but washing machines are louder? Why Why Why???
I just got the 4.5 Cu ft. HE model, It DOES have Deep Fill options for the Wash cycle AS WELL as the rinse. This is one is 3.8 Cu ft, if I'm not mistaken. Anyway, mine works fine, so far, if you are doing large loads you need to use Deep Fill options.... for this model that would be the Depp Fill rinse. I have not had any issues with mine. People complain about the noise, REALLY? Everything is noise in my house, kids, dog, Wife etc. I do laundry on Saturdays, I can get almost everyone's laundry done in a couple loads (4.5 CU ft!!!), I set the first load, shut laundry door, LEAVE go to the corner store for a 6-pack, come back, change out to dryer, put in new load, go to porch and drink beer with dog until load finishes, I really don't get bothered with the noise once I shut laundry door. Even if I'm in the kitchen ( next to laundry room) with wife on phone, tv on and teenage daughter face-timing....I seriously do not even HEAR this machine. Are you people trying to sleep while you run loads of laundry? LMFAO. Anyway, it does seem weird the lights and cycle goes dormant. But,,,,if you have a little patience and WAIT, it may click back on as they have timers and sensors that need a couple minutes if it thinks you changed cycles. Hitting buttons while it's sensing will only make matters worse. Patience!
I have the same model. Won’t agitate or spin
always use deep rince to get a good rince. Because washers nowadays do spray rinses on default instead of filling up with water and agitating like the old matchines.
Thanks for the tip.
@@KimTownsel You should try removing the lid switch and placing it in the slot. So that you could see whats really going on when the matchine is operating. You as the owner and user of the washing matchine should know how the matchine really operates. The lid switch could be removed with just a philips screw driver to unscrew the screws that hold it in place. You should make a video about it
I use softener anyway.
This is why people like Speed Queens. The TC5 is like a washer from the 90s.
LG front load washers are also quite nice.
Enough with speed queen give it a break
GE went to stupid crap in 1995.
Why? They're the only washer and dryer that will work right anymore.@@Thedonsmoney25823
GE doesn't want them to last, that way they sell more units.
You are exactly correct.
Kim should this machine fill up to rinse or just spray for a bit and thats considered rinse.?
@@monicac7683 Who knows? Mine does NOT fill to rinse.
Thank you for an honest look.
JUST one more thing.. Thanks!!
I wished that GE would bring back the older style Filter Flo, and Rim Flo washers-the REAL washers-instead of this plastic junk they are making now!
I remember the Filter-Flo style. I think manufacturers make appliances to last only a short time, forcing us to become a consumer of whatever they are selling. :(
Exactly!
I'm late to the post. just got mine today, and it sucks. thinking of returning it
Oh I just bought the same model! I have 10 days to return it if I am not satisfied. I am in the third day and I think it is too loud in the washing cicle. So I think I am going to take it back to Walmart. But honestly, I do not know what washer to buy! Please help 😊
I don't know what to buy either! It's why I still have this stupid version. Other viewers have suggested Speed Queen and Maytag.
Speed Queen is the highest rated but also one of the most expensive. I think they come with a 10 yr warranty but I don't want to spend $1400 for washing machine that I will likely leave in my condo when I sell it.
I just go one today but like its washing without water. very little water. the clothes are moist. but not immersed. is this correct?
That seems to be what this machine does. 😳 ☹️
@@KimTownsel i figuered it out. it seems the machine can see. i fixed the settings and it eventually filled. Yes it washes with less water. Actually i like it. my last machine lasted me 30 years but was a westinghouse. Lets see if this can match that. Take care Kim.
Most all the new ones are like that. My mothers Maytag is the same way.
I have the same exact washer and it fine
I have the same one exactly same noises etc. I had a whirlpool for 20 years and I also returned 2 of these stating the were defective. It is the (New Top Loader they said)! My current issue is mold growing inside the agitator under fabric softener cup. It says not to put anything in this hollow cavity but it's black mold and its getting on clothes when washing. Hmm? It smells horrendous and the whole laundry room smells like mold. I checked out your video to see if this was your issue. It was not. Mine is 2 years old now. Have been unhappy since the 3rd one was delivered. Also I always push Deep water button first you get double the amount of water just FYI. If anyone can look under the fabric softener cup and tell me if its also moldy I could certainly use the advice. Thanks
The worse whenever I wash my blankets and never spins my blankets it’s always wet I have to do it manually
Mmine washer is almost identical to yours, my model number is a GTW330 Wask3ww. My washer is also noisey, alot. When it's about to spin it goes out of whack, u balance?, plus it's tearing everyone's clothes. 👖👚👗👙🩳🩲👕👔It not in my budget to replace at the moment. But I do wash it tub all in then I start a cycle by it's self. Still sick washer. 🤯😠🙏
What it does it when you have the lid up and you don’t shut it quickly after it fills up what it does is it drains itself. It’s terrible I can’t tell you how many times I forgot and it will drain for no reason
I bought the same one, what a mistake. I did one load and sent it back to Lowes. Bought Samsung washer and dryer from Lowe’s ,great machines. Both on clearance sale, same price as the GE. Samsung washer model # WA45M7050AW
Thank you!!!
FYI, the Samsung you mentioned as being great above has been RECALLED due to safety issues.
Did you get top load or front load ?
My GE washer had so many issues and stopped working after 4 years of use
I have a GE and love it. Yep,a bit loud but better yhan any Samsung piece of junk I've ever owned.
My other washing machine was trash, it made a lot of noises, I couldn't go to sleep. I don't know what to do with it.
What did you end up doing, did you keep it? We just got one installed today, and it started making that awful cranking noise, so I came here to see if there were any videos on it. I’m wondering if I should just call tomorrow to have Lowe’s take it back :(.
This was the replacement and I can't tell it is any better. I still have this piece of #$% and it tangles at least one load of laundry each week. I recently posted an updated video. Check the reader comments under this video and the first video I made on the first one; we are not alone in our disappointment. Other viewers also provide advice on what to look for in my next washer. I am paying for other repairs but when I complete them, I will buy another washer but not a G.E.
@@KimTownsel
Uggh, that’s terrible. Sorry to hear that. We just got this today, so I’ll call tomorrow to see about sending it back.
I think I have a newer model than this one same brand and his has 2 more extra nobs but anyway I just received it today and did the first load and it’s been washing for an hour already.. so I’m not sure if that’s normal and it’s really loud I’m not sure if it fills at the right amount cause the lid locks on me all the time
Sounds about "right" for this family of GE Washers. 😠
2nd load in just installed machine filled for rinse & drained over & over & over & over 5+ times at least an hour. Repairman replaced broken part
THIS IS A NEW MACHINE. So next day the machine FAILED to fill for rinse cycle…..instead it started spinning for 2 mins. Then…spin light lit up & spun 20 mins
So I had to rewash clothes w/o detergent to get soap out
HOME DEPOT & GE informed me they can’t replace machine unless I have to have machine repaired 3x for same issue. Really???
The preferred brands I really wanted were out of stock for possibly months!
Back in the day a washer and dryer would last 20 to 30 years. In an average persons life you would have to buy two or three sets. Now they last five to ten years., So you will have to buy five to eight sets. What I hear is speed queen last around 25years. The Maytag commercial is good. Either one will cost you plenty. Somewhere between 1100.00 to 1400.00 just for the washer.
I got mine today and my girlfriend did 4 loads and I was laying in next room and I did not heard anything.its really quite washer and dryer.not sure why yours making that much noise.i am using GE feom last 4 years and I like it better then any brand out there.i guess samsung is best but I can bet on GE.sorry to hear that you have to go through all this after paid alot of money but I guess its just a manufacture fault.coz I never had a issue with GE washer and dryer.and that's the only company which makes 90 percent of products with American parts.so I saw someone was saying that,its happening coz it's made in china.its not made in china.it is made in america 100%.but I hope you will get the solution for it.thanx for your review.
Thank you so much! Your info encourages me to think that perhaps I have a lemon machine rather than a lemon model. 😯
I’ve had one just a little bit different model number for two years works fine. Sure it makes a little weird noises that’s because they make them out of light stainless steel and mostly plastic that’s why they don’t way any thing. Sure I probably won’t last as long is an old Maytag Had
It's a shame, right?
So loud. Thank you for sharing
You bet!