Thanks Chad. I have a GDL and was getting a buzz on my 4th string on certain notes. Noticed my tailpiece was off of the hoop. Just lowering the tailpiece to touch the surface of the hoop took care of the buzz. Thanks again!
My question: all videos i see, they lift a lid to get under the tailpiece. There is no lid, it's one solid immovable piece. All i need to do is add a string i broke while tuning. I have no idea how to remove the tailpiece. The user manual didn't show and no video out there shows me HOW?? so frustrated. It's a 5 piece full size vangoa banjo and i tried to loosen 2 screws and loosen some other knobs and I'm probably ruining my new banjo 😅
Hi! I've seen some videos regarding Presto style tailpieces which recommend not setting them on the tension hoop or using the angle adjustment screw andetting them "float". What is different about the TruTone tailpiece vs. a regular Presto style where uou set it up differently? I have a Julia Belle that I was doing some setup on and didn't want to mess up the tailpiece adjustment. Thank you!
Sorry to bug you guys with questions, but after watching this video a couple of times and looking at my own Banjo (a Maple Blossom) I think I have issues, but I'm not sure. So my tailpiece sits higher at the top (towards the 5th string) than it does at the bottom. Also, the long phillips adjustment screw is at a pronounced angle. Is it supposed to be straight up/down? Is it possible my tailpiece is bent all out of shape?
Hey Chad, what about the Deering standard tailpiece, like what's used on the Goodtime series? It's mounted to the banjo differently and has no adjustment screw. It's mounted to the coordinator rod. Is the standard tailpiece also supposed to be firmly against the tension ring like the True Tone piece in the video? My Artisan Special came with it almost an 1/8" above being in contact with the tension ring and 1/4" from the head as measured at the edge facing the bridge.
The Goodtime tailpiece can be adjusted by loosening the outside nut on the coordinator rod until there is a small gap between the tailpiece and the face of the rim that it makes contact with. The tailpiece should be set as low to the head as possible without contacting the head, there should always be a small gap from the surface of the head to the bottom of the tailpiece. This will give the Goodtime banjo the tightest “bluegrass” sound. To allow a warmer, rounder tone the tailpiece can be raised away from the head and set according to what the player’s ear prefers. Once adjusted tighten the outside nut firmly against the rim and re-tune the banjo. Hope this helps.
Is there any real difference between what's shown here and the Maple Blossom series? My tailpiece is WAY over the tension hoop. Also you don't need to loosen the strings before doing this?
Hi Timothy! No, the tailpiece on your Maple Blossom is exactly the same. You do not need to loosen your strings, but be prepared to have to retune. :-)
The Goſpel that ſaueth and how to be ſaued accoꝛding to the woꝛd of God : "1 MOꝛeouer bꝛethꝛen , I declare vnto you the Goſpel which I pꝛeached vnto you, which alſo you haue receiued,and wherein yee ſtand. 2 By which also yee are ſaued , if yee keepe in memoꝛie what I pꝛeached vnto you , vnleſſe yee haue beleeued in vaine. 3 Foꝛ I deliuered vnto you firſt of all , that which I alſo receiued , how that Chꝛiſt died for our ſinnes accoꝛding to the Scriptures : 4 And that he was buried,and that he roſe againe the third day accoꝛding to the Scriptures." - 1 Coꝛinthians 15:1-4 Holy Bible 1611 "9 That if thou ſhalt confeſſe with thy mouth the Loꝛd Ieſus , and ſhalt beleeue in thine heart , that God hath raiſed him from the dead , thou ſhalt be ſaued. 10 Foꝛ with the heart man beleeueth vnto righteouſneſſe,and with the mouth confeſſion is made vnto ſaluation. 11 Foꝛ the Scripture ſaith, Whoſoeuer beleeueth on him , ſhall not bee aſhamed. 12 Foꝛ there is no difference betweene the Iew and the Greeke : foꝛ the ſame Loꝛd ouer all, is rich vnto all, that call vpon him. 13 Foꝛ whoſoeuer ſhall call vpon the Name of the Loꝛd,ſhall be ſaued." - Romanes 10:9-13 Holy Bible 1611
Chad is awesome. He teaches you every step in easy to digest pieces.
He does! He is like that in real life, too. :-)
Thanks Chad. I have a GDL and was getting a buzz on my 4th string on certain notes. Noticed my tailpiece was off of the hoop. Just lowering the tailpiece to touch the surface of the hoop took care of the buzz. Thanks again!
Thanks so much. Now that I know how to use the TruTone...
Glad to help!
What about the Vega Senator? How do we adjust the tail piece on that?
My question: all videos i see, they lift a lid to get under the tailpiece. There is no lid, it's one solid immovable piece. All i need to do is add a string i broke while tuning. I have no idea how to remove the tailpiece. The user manual didn't show and no video out there shows me HOW?? so frustrated. It's a 5 piece full size vangoa banjo and i tried to loosen 2 screws and loosen some other knobs and I'm probably ruining my new banjo 😅
Hi! I've seen some videos regarding Presto style tailpieces which recommend not setting them on the tension hoop or using the angle adjustment screw andetting them "float". What is different about the TruTone tailpiece vs. a regular Presto style where uou set it up differently? I have a Julia Belle that I was doing some setup on and didn't want to mess up the tailpiece adjustment. Thank you!
Sorry to bug you guys with questions, but after watching this video a couple of times and looking at my own Banjo (a Maple Blossom) I think I have issues, but I'm not sure. So my tailpiece sits higher at the top (towards the 5th string) than it does at the bottom. Also, the long phillips adjustment screw is at a pronounced angle. Is it supposed to be straight up/down? Is it possible my tailpiece is bent all out of shape?
Hey! If you'd like to send us an image of your tailpiece to info@deeringbanjos.com we can take a look for you!
Did you get it fixed?
@@valcirp1754
Probably not or embarrassed because because it was so simple.
Wouldn't that often rupture the head?
Hey Chad, what about the Deering standard tailpiece, like what's used on the Goodtime series? It's mounted to the banjo differently and has no adjustment screw. It's mounted to the coordinator rod. Is the standard tailpiece also supposed to be firmly against the tension ring like the True Tone piece in the video? My Artisan Special came with it almost an 1/8" above being in contact with the tension ring and 1/4" from the head as measured at the edge facing the bridge.
The Goodtime tailpiece can be adjusted by loosening the outside nut on the coordinator rod until there is a small gap between the
tailpiece and the face of the rim that it makes contact with. The tailpiece should be set as low to the head as possible without contacting the head, there should always be a small gap from the surface of the head to the bottom of the tailpiece. This will give the Goodtime banjo the tightest “bluegrass” sound. To allow a warmer, rounder tone the tailpiece can be raised away from the head and set according to what the player’s ear prefers. Once adjusted tighten the outside nut firmly against the rim and re-tune the banjo. Hope this helps.
Is there any real difference between what's shown here and the Maple Blossom series? My tailpiece is WAY over the tension hoop. Also you don't need to loosen the strings before doing this?
Hi Timothy! No, the tailpiece on your Maple Blossom is exactly the same. You do not need to loosen your strings, but be prepared to have to retune. :-)
Please help, my husband has undone his clamshell tail piece and cannot put it back together 🙏
Hi Rachel, your best bet is to call our customer service line at 619 464 8252, or email info@deeringbanjos.com.
The Goſpel that ſaueth and how to be ſaued accoꝛding to the woꝛd of God :
"1 MOꝛeouer bꝛethꝛen , I declare vnto you the Goſpel which I pꝛeached vnto you, which alſo you haue receiued,and wherein yee ſtand.
2 By which also yee are ſaued , if yee keepe in memoꝛie what I pꝛeached vnto you , vnleſſe yee haue beleeued in vaine.
3 Foꝛ I deliuered vnto you firſt of all , that which I alſo receiued , how that Chꝛiſt died for our ſinnes accoꝛding to the Scriptures :
4 And that he was buried,and that he roſe againe the third day accoꝛding to the Scriptures."
- 1 Coꝛinthians 15:1-4 Holy Bible 1611
"9 That if thou ſhalt confeſſe with thy mouth the Loꝛd Ieſus , and ſhalt beleeue in thine heart , that God hath raiſed him from the dead , thou ſhalt be ſaued.
10 Foꝛ with the heart man beleeueth vnto righteouſneſſe,and with the mouth confeſſion is made vnto ſaluation.
11 Foꝛ the Scripture ſaith, Whoſoeuer beleeueth on him , ſhall not bee aſhamed.
12 Foꝛ there is no difference betweene the Iew and the Greeke : foꝛ the ſame Loꝛd ouer all, is rich vnto all, that call vpon him.
13 Foꝛ whoſoeuer ſhall call vpon the Name of the Loꝛd,ſhall be ſaued."
- Romanes 10:9-13 Holy Bible 1611