Rekluse RadiusX Installation for KTM Duke 390 and Husqvarna Svartpilen 401
Вставка
- Опубліковано 20 січ 2020
- This video covers the installation process for the Rekluse RadiusX auto clutch for the KTM Duke 390 and Husqvarna Svartpilen 401.
- Авто та транспорт
Very helpful video, now I just have to fit the kit myself!
could you please tell me if this kit can be installed on duke 200 ??
Can this be installed on a 390 duke with hydraulic clutch conversion (replacing cable with clutch slave piston cylinder type hydraulic conversion)
Kya price ka lga bhaiya ji
can u have for zx25r
Does it works on older duke 390 2014 below without slipper clutch?
The clutch is applicable for 2015+ models. To make a formal product request, please e-mail "customerservice@rekluse.com.
What is the difference from stock plates? any benefits in performance or life of clutch?
Hi Job, Thanks for your question. Our TorqDrive friction disks are unique because they are thinner which allow us to fit more disks in the clutch pack. More frictions = more torque capacity thus unlocking the full power of your engine without the need to add stiffer pressure plate springs. Our frictions are made with a steel core for improved heat dissipation and longer clutch life. Please reach out if you have any other questions.
would this work with a quickshifter/autoblipper installed too?
Thanks for your question. Yes, auto clutches can work with quick shifter devices. To confirm for your case, give us a call at (208) 426-0659 or e-mail us at customerservice@rekluse.com
Would this also work on a Vitpilen 401?
Hello, this clutch for the Vitpilen 401 is available directly through Husqvarna. Part Ref: 28532900000
Hi, your website doesn't show compatibility for the RadiusX with any 390 Duke models.
It only shows the manual Torqstreet clutch. What's the deal? I'm after a RadiusX for a 390 duke, and my 2015 690 Duke R.
Hello Samuel, thank you for reaching out. Our website is currently being updated. We do offer the RadiusX system for your 390 Duke. They are available through your local KTM dealer. We do not offer a RadiusX for the 690 Duke at this time. Thank you again and have a great Holiday season
Hello, what is the purpose of the fastening strap?
The fastening strap on the brake lever keeps the motorcycle from being able to roll when parked. When an auto clutch is installed, the motorcycle will be able to roll even while in gear, as if you had the clutch lever pulled in.
Do you have this kit for the 125Duke?Would be nice not just drive a scooter...
Hi there, thanks for your question. Yes- to order the RadiusX auto clutch for the Duke 125, please contact your local or preferred KTM dealer. The clutch is KTM Part Number 28832900000.
Hi,
I have a rekluse clutch installed on the duke 390, but it's now slipping under a higher load. Adjusting clutch cable play reduces, but does not eliminate slippage completely.
Is it possible to eliminate slippage completely?
Hello klugegl, thank you for reaching out and running our products. Please shoot our team an email at customerservice@rekluse.com or if you are located in the US, please give us a call at 208-426-0659 8am-5pm MTN time. Our staff will get you taken care of. Have a great day!
@@RekluseMotorSports what was the resolution here?
G'Day guys how's it going? when i look on your website for the auto clutch for the 390 duke its not giving me the option?
Hi Andrew, Thank you for your question. Yes, we do offer our RadiusX for the Duke 390. For pricing and availability please give us a call at (208) 426-0659 or e-mail us at customerservice@rekluse.com
What doyou mean about the last 3mm Friction plate " making sure its in the right basket slot" can it be unstalled the wrong way?
The basket has a main slot, where the steel sleeves are installed. This is the slot where all the friction disks should be installed, as shown in the video. There are smaller slots on the basket between the main slots. The friction disks should not be installed in these smaller slots.
@@RekluseMotorSports 1 main slot? Or alternating slot, everything is working except you cannot stop without pulling the leve,r it stalls
@@willyangabrigo1174 for technical assistance, please e-mail tech@rekluse.com
do you guys have a model for svartpilen 701?
Thank you for your interest in Rekluse. Unfortunately, we currently do not have product available for the Svartpilen 701. I will add your request to our product request log where our development team monitors demand for all the different models. If you would like to provide your phone number, you will be added to a call out list should we develop this clutch in the future. For more info you can also contact us at (208) 426-0659 8AM - 5PM MST. Let me know if I can provide any more info and have a nice day.
Sincerely,
Rekluse Team
Do I need to drain ALL liquids before removing the clutch cover ?
Yes, otherwise you will end up in big mess.
No you should always start and open your cover...lol
Hello does this work with rc 390?
Hello, this clutch for the RC 390 is available directly through KTM. KTM Part Ref: 28532900000
so...i don't see the part number online for this kit (390), please help thanks~
KMF
KTM Power parts 285.32.900.000
Enrique Miller thank you
Can we do this for duke 250 .pls answer
Thanks for your interest in Rekluse. The RadiusX auto clutch for the Duke 250 is available through KTM. It is KTM reference number 28532900000. Please let me know if you have any other questions and have a nice day.
www.ktm.com/en-us/parts---wear/powerparts/products.html
hei, will this fit a duke 125 2017?
Hello Jo, thank you for watching our video. No, that system will not. It's specific for the 390 & 401. At this we do not offer a clutch for the Duke 125. Thank you again.
Hello I’m trying to get 390 duke but i want to buy this Rekluse auto clutch if you dont mind can you send the link where can I buy this clutch, thank you I really appriciate that.
Hi there, the RadiusX auto clutch is available exclusively through KTM PowerParts. Please check with your local KTM dealer to order. Thanks.
What size of rubber band are you using in the video for the clutch lever?
Good morning R.G., Thak you for watching the video. We use a 1mm thick rubber band and can get you one if needed. Our team can be reached at 208-426-0659 8-5pm Mon-Fri. Or shoot us an email @ customerserivce@rekluse.com. Thank You!
@@RekluseMotorSports Thanks for the reply. Also I was wondering in the manual of the Torqdrive Clutch, there is not mention of the clutch lever and cable adjustments. Only the level of play your clutch needs right. This adjustments were intended for the automatic rekluse clutch or for every clutch kit?
@@r.g.8339 Hello, yes you are correct, the adjustments for Free Play Gain are for our Auto Clutches. Have a great day!
@@RekluseMotorSports appreciate your response. Ill let you know how the torq drive feels.
Is this good for stunting out a duke 390
Hi Jack, Thank you for the comment and reaching out. We do have customers that use our clutches for stunting and have really good results. Let us know if we can help with any other questions.
Does this work on the 390 adventure since it shares the same 390 motor?
Thanks for your question. At this point, the RadiusX clutch for the Duke 390 has not been verified for the Adventure 390. Feel free to check back later this Spring for possible updates.
@@RekluseMotorSportsdoes this offer clutchless shifts on the 390?
Hi
I just had this installed on my Svartpilen 401. Love it, except when coming to a stop there is not enough compression / engine braking. How can I fix this?
Hi PC. We are glad you are enjoying the product. Are you able to call our team to review engine braking? It is generally easier to talk through things over the phone. We can be reached at 208-426-0659. Our office hours are M-F 8:00am-5:00pm MST.
There is a 2 small tiny aluminium thing, what is the use
At which time in the video are you referring to?
@@RekluseMotorSports not in the video, it came with the package i tjink it has 2 extra aluminium fatener for the core
@@willyangabrigo1174 for technical assistance, please e-mail tech@rekluse.com
Hello; putting oil on the plates will finish in an slip clutch man. With the normal oil there is just enough; you do not need any oil on the friction discs.
Ur not right
@@AndrewNoronha-cb2gy Why? what do you want to add or say? Always was that way but may be you have a new way to do things so enlighten us we are waiting to what you have to say
It would be helpful to mention that the required gap is actually created by the tension of the cable...lol
First lol
could you please tell me if this kit can be installed on duke 200 ??
Hello, we currently do not make product for the Duke 200. If you would like to make a formal product request, please message "customerservice@rekluse.com".