I tried this and it worked great! I used 30 ft of 1/2 inch PVC an 2 yards of fabric per wing. DO NOT USE 1 INCH. I did that my first attempt and it was to heavy to lift. Sadly my clamps are different so when I try to swivel them forward it jabs my sides. Try to get ones like his. Also I recommend a stomach strap as well as a chest strap. It is easier to lift the wing's with your hands instead if arm straps. Hope this is helpful!
@@jboyt2431 polyester is the cheapest often, you can get a very light weight polyester or nylon fabric, where the polyester one is around €0,50 in the eu, so likely half that price if you are in USA. cotton is very heavy, canvas even more so. if you want it for practical use you can look towards nylon or ripstop nylon which is strong enough for actual use, use if you really only focus on practicality armed PE works very well since it can hold a few hundred kilogram of force per cm2 and is also ripstop, so that is strong enough for actual flight(where ripsotp nylon also is technically seen, but you need to be more careful when working with ripstop nylon. you should also add extra support to prevent the wings from going towards your back so you won't have to lift your own weight. I have experienced that for me a wing of 4M2 was enough to fly when there was decent updraft, this was however a powerkite design so it had much more speed and gained more lift from that, for actual flying devices shaped like normal wings you should look to around double that size for some fun gliding, to make it proper for actual flight there are some more things to concern like the controls mostly, but for now you can mostly rely on your weight and a slight v shape. but the wings should be constructed stronger with double joints instead of single sided ones and you likely need something behind it and in front of it, often this is done with a strong rope from the front. if you want to glide at lower speeds you can use the air foil shape in the wings, however the standard airfoil is heavily outdated despite almost every plane or flying machine still using it. for simplicity you can keep it like a normal airfoil but at the tips of the wings they go back to a flat wing as if there was no airfoil, this makes it around 80% more efficient than a traditional wing according to nasa's papers, it mostly does so by converting the force which normally forms turbulence on the tips into lift, this also allows much lower speeds while maintaining lift. the other big gain is that you don't need to add a tail for drag behind it because it stays stable by itself, this also makes it much more stable which are the 2 reasons(efficiency, stability) why it is used in the mars glider for example, however the wing type is much older than that. if you get them folding well while also having such a new version of the airfoil it would be nice if you posted the designs since it isn't something I have really tried to do yet because a airfoil like shape increases material usage, cost and weight a lot, so I didn't really see much reason to put it in back foldable wings. however since in Europe cosplaying is legal, but using things that go into the air, or going into the air yourself is not unless you buy a very expensive licence from the government, it would possibly be nice to have foldable cosplay wings which give you proper stability and more lift at low speed when flying
Now make it about 6x bigger have a tail rudder elevators and ailerons use aluminum instead of pvc and high strength dracon fabric then you have yourself a possibly working glider or a death wish
Thank you so much for this tutorial. It makes for a great prototype for a polished product. Aside from converting metric to imperial, it was easy. I also curved the two inner ribs as well. I purchased some red and black scales textured vinyl, cut it in strips, used spray adhesive and gave the “ribs” of the wings a bit more depth and realism, I also made wing dew claws to cap off the ends. I’ll post the final product when I’m completely finished but overall, I’m very pleased with the result.
Fiil pipe with sand and cork each end ? ....prevents the tubes from kinking ! - warm pipe & bend When pipe cools down remove corks empty sand out ? ...perfection ! I was shown that while at school in 1976! (15 years old ) - Whole clase was on a plumbing course ? Getting us all ready for leaving school in 77! - I Never actually used that hack myself ? haha - (60 year old next) - Thought I better pass it on now while I can ! - Might not be here much longer ? - Not if I try jumping out of an upstairs window with my bat wings strapped to my back ? - Haha ! This tip might help just bend pipes better If someone - is building these great wings ?
So for the past two days, I've been looking at ways to make movable wings, then I see this video made a day ago, how did he know exactly what I was looking for at the right time
Ok. I've made something from somewhere before and just made it scaled to myself at the time. Use an arm length from the final shot and your own arm for measurements.
The pipe he uses looks like solar heater pipe, which isn't easy to find. Home Depot near me only carries schedule 40 PVC, too thick for this. Lowe's had the thinner stuff. I bought three 10 foot lengths in the 1/2 inch diameter, two feet of 3/4 inch, four 3/4 inch pipe clamps (I assume his fancy plastic ones are part of a solar system as well), four 3 inch bolts (for the three pipe joints), eight 2 inch bolts, four 1 1/4 bolts (for the pipe clamps, two 1/4 inch PVC 90 degree angles, to two 1/4 T-connectors. Screenshot his measurements, cut the pipes to his specs, i painted them at this stage, drill and build using your screenshot from his measurements. The 3/4 pipe goes over the vertical 1/2 pipe on the square section with the wings connecting to the pipe clamps attached to the 3/4 pipe, this allows the forward rotation of the wings. The straps, which aren't clearly shown, are connected like backpack straps to the top and bottom horizontal bars in the back square piece. The arm straps are connected to the wings. You'll see which piece as you manipulate the wings and see which one allows the best movement.
Sorry, 1/2 inch connectors. Also, as my son wore it we found the nuts kept backing out. I dropped some hot glue on them but one still came off as he was trick or treating. I'm going to try the nuts that have nylon in them, they are locking
Pretty fast to design, film, edit, and upload in less than 36 hours. Normally these kinds of videos take several days to make, and are set to "release" automatically a few days to a few weeks after upload.
Wish this “tutorial” didn’t leave me guessing how to do basically everything, so far it’s taken 4 hours and we still don’t understand wtf we need to fix for it to work
Assuming you'd ever see this, would I have to change the size of the pipes if I wanted the base square to be a bit shorter so you wouldn't see it over my shoulders?
I took the pvc structure, but the cloth part was not working out but i use cardboard, feathers and lights it came out beautiful for this Halloween, thank you
Currently just finished making them. Still wishing there was more info because my wings are unable to close all the way at the elbow joint, and I don't know how to make it work.
Really, if you appeared at night in the woods with these wings, people would think they would be a creature from another dimension, all that's missing is the bat mask, I liked the wings 😉
well after having to diy some things to make this, i finally have it! I used fabric on both sides to hide all the hardware and it looks great! thanks for the video. I would have loved more descriptions and measurements though.
Hello, just curious, where can i get the stuff you use for other things that ou make that uses motors, batteries, switches? I would really appreciate it...
How heavy exactly would you say the frame is? Im working on doing wings like this for a cosplay of mine! However im being bombarded with the question, “how heavy is it?” And i would really appreciate some help! Thanks! This is super cool and helpful!
boy oh boy that reminds me of a birdman you make it look so easy I am from India I watch each and every of your video you are such a genius your videos are amazing love them all👌👌✌✌👍👍 maybe u are gonna fly with that wings some day
Materials:
-Magic tape strap
-Pvc pipes
-Pipe joiner
-Plastic pipe clip
-Bolts and knots screw
Can you be a bit more specific?
Thanks
:D
heat gun and hot glue gun too
@@Solarcai1293 You can just use stove fire too
I tried this and it worked great! I used 30 ft of 1/2 inch PVC an 2 yards of fabric per wing. DO NOT USE 1 INCH. I did that my first attempt and it was to heavy to lift. Sadly my clamps are different so when I try to swivel them forward it jabs my sides. Try to get ones like his. Also I recommend a stomach strap as well as a chest strap. It is easier to lift the wing's with your hands instead if arm straps. Hope this is helpful!
Hi... I really don't know what fabric for the wings to use ... would you ask me to help with the type of fabric?
Eu não estou acertando os furos depois daquele primeiro que ele faz. Você poderia me ajudar com isso já que fez uma ?
I just used cheap craft store fabric. I think I just used a polyester blend. But I think cotton works too.
@@jboyt2431 polyester is the cheapest often, you can get a very light weight polyester or nylon fabric, where the polyester one is around €0,50 in the eu, so likely half that price if you are in USA. cotton is very heavy, canvas even more so. if you want it for practical use you can look towards nylon or ripstop nylon which is strong enough for actual use, use if you really only focus on practicality armed PE works very well since it can hold a few hundred kilogram of force per cm2 and is also ripstop, so that is strong enough for actual flight(where ripsotp nylon also is technically seen, but you need to be more careful when working with ripstop nylon. you should also add extra support to prevent the wings from going towards your back so you won't have to lift your own weight. I have experienced that for me a wing of 4M2 was enough to fly when there was decent updraft, this was however a powerkite design so it had much more speed and gained more lift from that, for actual flying devices shaped like normal wings you should look to around double that size for some fun gliding, to make it proper for actual flight there are some more things to concern like the controls mostly, but for now you can mostly rely on your weight and a slight v shape. but the wings should be constructed stronger with double joints instead of single sided ones and you likely need something behind it and in front of it, often this is done with a strong rope from the front. if you want to glide at lower speeds you can use the air foil shape in the wings, however the standard airfoil is heavily outdated despite almost every plane or flying machine still using it. for simplicity you can keep it like a normal airfoil but at the tips of the wings they go back to a flat wing as if there was no airfoil, this makes it around 80% more efficient than a traditional wing according to nasa's papers, it mostly does so by converting the force which normally forms turbulence on the tips into lift, this also allows much lower speeds while maintaining lift. the other big gain is that you don't need to add a tail for drag behind it because it stays stable by itself, this also makes it much more stable which are the 2 reasons(efficiency, stability) why it is used in the mars glider for example, however the wing type is much older than that. if you get them folding well while also having such a new version of the airfoil it would be nice if you posted the designs since it isn't something I have really tried to do yet because a airfoil like shape increases material usage, cost and weight a lot, so I didn't really see much reason to put it in back foldable wings. however since in Europe cosplaying is legal, but using things that go into the air, or going into the air yourself is not unless you buy a very expensive licence from the government, it would possibly be nice to have foldable cosplay wings which give you proper stability and more lift at low speed when flying
@Arts of Akanksha well, you can alter it probably. Make all the pieces a bit smaller or something.
MATERIALS:
Osier branches, waxes
WARNING:
Don't fly too close to the sun, ask Daedalus for more advice.
Ridge Gavin Engo H A
Nice an icarus reference
Icarus: fuck Off.
*falls down*
SHIiit
I WAS BORN IN 2011
@@Gabrielgrzywacz-g9t young boi
Now make it about 6x bigger have a tail rudder elevators and ailerons use aluminum instead of pvc and high strength dracon fabric then you have yourself a possibly working glider or a death wish
UA-cam comments giving me creative ways to kill myself. Nice
Mr.E your welcome
Uh u r a really smart person if you build that let me know and I'll watch that video.
The latter
Why not have both?
Nice elytra I didn't think you could craft one I just got mine from a end city
?
He is talking about minecraft
And I just got 3 elytras 😂
lol
Is it possible to fly with this one?
Thank you so much for this tutorial. It makes for a great prototype for a polished product. Aside from converting metric to imperial, it was easy. I also curved the two inner ribs as well. I purchased some red and black scales textured vinyl, cut it in strips, used spray adhesive and gave the “ribs” of the wings a bit more depth and realism, I also made wing dew claws to cap off the ends. I’ll post the final product when I’m completely finished but overall, I’m very pleased with the result.
You have a link to the final product? I'm hoping to make some for my daughter's Halloween costume.
Do you have a picture of it?
Ain't they curved hands on the wings?
@@benlucchese7375 thanks not a hand it has additional features like this 🖕
Me: *builds it*
Also me: *adds jetpack*
Also also me: LETS GO BOIIIS
My new Halloween costume
oh thx for the likes
You're welcome.
Omg yasss
It would take me a long time to make that though @-@
@@hannahhh6898 I am currently making it.
Fiil pipe with sand and cork each end ? ....prevents the tubes from kinking ! - warm pipe & bend When pipe cools down remove corks empty sand out ? ...perfection !
I was shown that while at school in 1976! (15 years old ) - Whole clase was on a plumbing course ? Getting us all ready for leaving school in 77! - I Never actually used that hack myself ? haha - (60 year old next) - Thought I better pass it on now while I can ! - Might not be here much longer ? - Not if I try jumping out of an upstairs window with my bat wings strapped to my back ? - Haha !
This tip might help just bend pipes better If someone - is building these great wings ?
Thank you for this❤
So for the past two days, I've been looking at ways to make movable wings, then I see this video made a day ago, how did he know exactly what I was looking for at the right time
I know. Right?! I was thinking of umbrella splines for lightness, but this is so much more likely to survive and work.
That's Me today lol
if only I could fly for real😂
Yeah...I would fly away from my problems
☃️🏔️🐸
You are my god if you make me fly
Nyasar bang?
@@jxjxjdjdjcjj788 ıj🙂🤗😋🙂🙄🤗😘🙂😐😐☺🤗💤👸👳♂️🤴👨✈️👩🚒👮♂️👮♂️👮♀️🤴👳♂️👸👸👸👸👸👸👸👷♂️👱♀️🧔👩🚒🤴👷♀️👩🚒👷♀️👱♂️👨🎤👨🎤👨🎤👨🎤🤴🤵👸👸👸👸🏿🧔👸🏿🧔🤴👳♂️🍄🥕🎂🏐🎯🎯🎯🎯⛳🎯🎯🎯🎯🎯🎯🎯🏑🎯⛳🎯🏒⛳🏒🏉🏈🏉🎿🏂🏂
MATERIALS LIST
*PVC Pipes*
1/2 inch:
120cm x2
65cm x2
45cm x2
50cm x2
26cm x2
53cm x2
45cm x2
24cm x2
42cm x2
37cm x2
L shaped connector
T shaped connector
3/4th inch:
32cm x2
*Nuts and Bolts*
*Plastic pipe clip*
*Velcro magic tape strap*
Saving this for future reference
Can we have like an actual how to video with the measurements and steps like
Plz yes
Ok. I've made something from somewhere before and just made it scaled to myself at the time. Use an arm length from the final shot and your own arm for measurements.
can we have one that flys
The pipe he uses looks like solar heater pipe, which isn't easy to find. Home Depot near me only carries schedule 40 PVC, too thick for this. Lowe's had the thinner stuff. I bought three 10 foot lengths in the 1/2 inch diameter, two feet of 3/4 inch, four 3/4 inch pipe clamps (I assume his fancy plastic ones are part of a solar system as well), four 3 inch bolts (for the three pipe joints), eight 2 inch bolts, four 1 1/4 bolts (for the pipe clamps, two 1/4 inch PVC 90 degree angles, to two 1/4 T-connectors.
Screenshot his measurements, cut the pipes to his specs, i painted them at this stage, drill and build using your screenshot from his measurements.
The 3/4 pipe goes over the vertical 1/2 pipe on the square section with the wings connecting to the pipe clamps attached to the 3/4 pipe, this allows the forward rotation of the wings.
The straps, which aren't clearly shown, are connected like backpack straps to the top and bottom horizontal bars in the back square piece. The arm straps are connected to the wings. You'll see which piece as you manipulate the wings and see which one allows the best movement.
Wanting to make this today, THANK YOU FOR THIS!!!
Also, you say to use 1/4in elbows and connectors.. is that supposed to be 3/4inch?
Sorry, 1/2 inch connectors. Also, as my son wore it we found the nuts kept backing out. I dropped some hot glue on them but one still came off as he was trick or treating. I'm going to try the nuts that have nylon in them, they are locking
Finaly a usefull comment! Thank you :)
@@rahicfinn4435 I was actually wondering if the nuts would back out
Writing from the hospital. Not functional. Be careful.
dude, what the f is wrong with your avatar
Hahaha. I don’t drink anymore so I do what I can. 😆😆
Hmm
Dudes he don’t want more people to save (Be careful okay)
The fuck..!?? That was so creepy :v
Can we get more information on this like last steps to make it articulate and how u strapped it on🙏
I'm wondering how that part works too ngl
watch the video at half speed
They just used hot glue or super glue, pins, and straps.
😁
Is that from "all the good girls go to hell"!?? :v
THATS WHAT I THOUGHT
This is the comment I was looking for when I clicked the video
Just watched it and then this...
Coincidence? I THINK NOT!!!
Pretty fast to design, film, edit, and upload in less than 36 hours. Normally these kinds of videos take several days to make, and are set to "release" automatically a few days to a few weeks after upload.
xD billie bought them
Imagine go to Halloween party, sit in a bar, try to grab your drink and remove someone's eye XD
aahahahahahahahahahahahahahahahahahahahahahahah
Literally no one: .........
Billie Eilish: 3:52
😂
Yes
I was going to comment on that
Sureee!!😂😂😂
please tell me the name of the song)
Ａｌｌ Ｔｈｅ Ｇｏｏｄ Ｇｉｒｌｓ
Ｇｏ Ｔｏ Ｈｅｌｌ
A w e s o m e
Shame that one was cgi.
a w e s o m e
Why?
:)
Never thought it would be that easy...
Wait, it is The Q.... There is no hard task for him. 😂😂😂
For those looking to make these, they have PVC cutters in the same aisle for like 7 bucks lol
NO hacksaws on pvc... keep them edges clean
Listen to this guy, saw is much more expensive if you’re just buying it for this project, and takes a ton more arm strength
imagine wearing this while going skydiving and it works THAT WOULD BE COOOOOOOOOOL
id have anxiety of it falling apart mid flight tho xD
🎉🎉🎉😎🎉😎🎉🎉😎🎉😎🎉😎🎉😀🎉😭🎉❤️🎉🎉❤️🎉❤️🙏❤️🎉❤️🎉❤️🎉🎉❤️🎉❤️🎉❤️🎉
Yes yes yes!!!! Please do it!!!!
@@KC._.1116 no i mean like having a parachute with u while jumping
Make a tutorial. You did show us how you made it but some of the angles when you mesured left us with a estimate.
Please make a tutorial though.
News suddenly a new surge of bat people is taking place across the world
Hahaha..... Suddenly everybody on Earth got wings
Hehehe😆
beople
Ķkķkkkkķķkķmkķkķkķ kk
Nnnnnñññnnnn
@@ibroramoni8212 same
So cool and much more affordable than aluminium i imagine! Thanks for the video!
I have been looking for diy wings for years and finally found it thank you
Wish this “tutorial” didn’t leave me guessing how to do basically everything, so far it’s taken 4 hours and we still don’t understand wtf we need to fix for it to work
Skill issue
Looks incredible! Also the movement of the whole construction is awesome. One question I have is: What is stronger, hotglue or sewing?
Sewing usually
Sowing with dental floss is stronger than thread and at the Dallor tree dental floss comes in Black and white
I’m here because I want to somehow follow along to this and make a Philza minecraft cosplay-
YES
Same
Assuming you'd ever see this, would I have to change the size of the pipes if I wanted the base square to be a bit shorter so you wouldn't see it over my shoulders?
Rapture left shoulder had seagul poop has this got to do with anything?
Before I read the description, I was like "Those look like billie's wings" amazing job dude, i'm going to be billie demon for halloween
Amazing . First Giant wing video .
Power of PVC pipes 🔥🔥
Thanks for this vid just finished my wings for only €14 and 1 hour of work absolutely amazing
What diameters of PVC did you use?
@@WhateverIWantChannel 19mm at that size you don't have the same attachments as used in the video so I had to make some custom stuff
blip blop 88 thank you!!!
More awesome Halloween costume builds please!
but its not flyable :\
Absolutamente genial! No dudo que con mayor superficie de sustentación este chico volará efectivamente!
*Billie Eilish has joined the chat*
All good girls go to hell
legitly I'm about to cosplay that mv
It's so simple yet so cool. I love it
I took the pvc structure, but the cloth part was not working out but i use cardboard, feathers and lights it came out beautiful for this Halloween, thank you
So awesome! I can actually make a dragon costume with working wings! Thank you, thank you for your amazing video!
I will connect these wings to my backpack so I can fly out of school
*Lucifer is back*
In hell, yes🤗
🙄
@@spontaneouscreativity6858 he get on the land
Quinton beck is that you??
Batman Begins! Very good!
Bruh this is the best I can find on making wings, I love it but I wish there was more information and step by step. Great video though.
Currently just finished making them. Still wishing there was more info because my wings are unable to close all the way at the elbow joint, and I don't know how to make it work.
This would be a great edition to an ender dragon Halloween costume!
U play Minecraft?
Awesome! I'm totally going to make this for Halloween! Supercool , thanks for including the measurements too! Definitely going to try this!😀❤😀❤👍👍👍🤯😃
Você usou as asas junto com o que no halloween 🎃?
I'm commenting this from Jupiter guysss
It worked awesome
Thank you so much! I've been dying for a simple tutorial on how to make wings! Now I can make my Lucifer cosplay that I always wanted! Thx so much!
Really, if you appeared at night in the woods with these wings, people would think they would be a creature from another dimension, all that's missing is the bat mask, I liked the wings 😉
5 minutes of silence for this guy after making this glider he realises that he can't fly
well after having to diy some things to make this, i finally have it! I used fabric on both sides to hide all the hardware and it looks great! thanks for the video. I would have loved more descriptions and measurements though.
''I believe I can fly...''
For real.
You are the man! I just finished a pair for my Red Demon! They work awesome!
Hello, just curious, where can i get the stuff you use for other things that ou make that uses motors, batteries, switches? I would really appreciate it...
Yeah I would love to know too
Home depot most likely
when you try to do that tho just make sure that its no to heavy that it will bend, droop, or feel uncomfortable
Hello, I'm from Thailand, I like your video.
Hi I'm from UK
Yours is the best comment to this video !
Can you please make a materials list please?
hellboy version of PVC
Billie eilish??
Love this design! Awesome!
Nossa passei horas procurando alguém que mostrasse alguma asa com vários momentos e esse sem dúvidas foi top !!!! Parabénsssssssssssss amei !
Ola mano izaque mas esta asa que ele fez avoa mesmo.
Imagine how cool this would be with feathers attached to the fabric. 😳😳
0:40 that satisfaction🤤🤤🤤🤤🤩🤩🤩🤩🤩
Better than I thought it would turn out. Great work
So cooolll!
You look like the valkyries in god of war
Cool Billie wings
Now, you too can learn how to cosplay Billie Eilish. You can also add some feathers to make it more like Billie.
Fully functional, lots of effort put into it.
standing in the mountains and jump. Miracles will come to you🤔
You can flying 😱 to a hospital
😂😂😂😂😂😂😂😂😂😂😂
Nejlepší ❤️ moc a moc děkuju. Přesně tenhle návod jsem potřebovala...
Where do you attach the straps for the wings?
oh my goodness, this guy is a GENIUS!!!
Just paint those PVC pipe in black color..it will look awesome!! But you will still not be able to fly😊
well done sherlock
Amazing Wings
Belly Eyelash wants her bbq wings bacc
LightDarkEquivalent 714 this made me laugh. Thank you for making my day!😂😂
awe I want to make a Vultan cosplay from Flash Gordon Loved him I always thought his wings where cool this idea helps out
Parabéns excelente trabalho 😍😍
Very Cool Bat Wings.
Ficou muito bom mesmo
This guy is a legend
Billie : Aw yeah
I'm impressed you did a great job on your wings
You are the best
I made some and they are so so cool, fantastic tutorial
This is so amazing!!! What's that part/joint called which shown in this vdo from 1:50-2:00?
Pipe joiner and plastic pipe clip
Mishael Abogado do you know where you could purchase it? I can’t find it anywhere!
Ya las hice. Están preciosas y me encantan. Muchas gracias ❤❤❤❤
Tieness todas las medidas, podrias dar mas detalle porfavor
0:12 personaly i will be very bored cuting the wings 😂😂
Wow. This. Is. AWESOME!
Wht´s the name of the piece in 1:50 and where I could buy it? Thanks..
Home depot most likely
@@homiehopper52 but I you call that piece?
@@ortegaviacava i honestly dont know sorry
No way!!! I TOLDLY WANT THEM!!!!!!!!!!!!!!!!!!!
What did you use to grip the PVC on the body to the wing 1:50
Pipe joiner and plastic pipe clip
Jjmnnhykj¡B👁️👁️👁️👁️👍🐼👍👍👍👍👍👍👍👍👍👍👍🐩🐩🐩🐩🐩🐩🐩🐩🐩🐩🐩🐕🐕🐕
Be
How heavy exactly would you say the frame is? Im working on doing wings like this for a cosplay of mine! However im being bombarded with the question, “how heavy is it?” And i would really appreciate some help! Thanks! This is super cool and helpful!
The only problem I see with this is the possibility of going to hand something to someone and slapping then with your sick wings
Wow the different frames and video editing and presentation was more amazing to me than the project.
Me: playing Minecraft.
The Q: I have just build elytra!
Me: calling FBI
My Goodness, I haven't seen this guy in so ooooo long.
My Lucifer is lonely...
Only legends will know...
🤨👍
Season 5 hype
Cringe
14 year olds*
I want to make this too! For another memory and development in life 👍
The Batman!
boy oh boy that reminds me of a birdman you make it look so easy I am from India I watch each and every of your video you are such a genius your videos are amazing love them all👌👌✌✌👍👍 maybe u are gonna fly with that wings some day
nope not EVER with those wings