That was very clear, concise and helpful. Thankyou. (Before watching your video I had struggled for 30+ minutes having misaligned the washers after cleaning out the basin drain).
Had a leaking connection between the waste and the trap. The black washer bit was stuck behind the trap thread. The video showed me it needed to be taken out and attached to the waste before screwing everything up. Thanks it worked really well!
I have the same problem but, how did you fish the rubber ring out? Both black rings are stuck down too far and I can't seem to hook them out. May have to buy a new trap due to this.
thank you - this helped but I couldn't see which way round the rubber washer was and had to good 'shamford edge' until a friend said I probably meant 'chamfered'. For anyone else you need to put the stretchy washer over the pipe from the wall with the pointy bit pointing at the trap
thanks for this I dont have to cut through the waste out flow pipe to fit a tee and pit an air addmittance valve on top ,so this saves me a lot of trouble ,thanks
That was very clear, concise and helpful. Thankyou. (Before watching your video I had struggled for 30+ minutes having misaligned the washers after cleaning out the basin drain).
Thank you for posting this video was at a lose end trying to fix my bathroom sink tonight and this help me get it done in no time 👊
Had a leaking connection between the waste and the trap. The black washer bit was stuck behind the trap thread. The video showed me it needed to be taken out and attached to the waste before screwing everything up. Thanks it worked really well!
I have the same problem but, how did you fish the rubber ring out? Both black rings are stuck down too far and I can't seem to hook them out. May have to buy a new trap due to this.
@@annwitbrock9112 its a long time ago and can't remember! I thinl they are cheap to buy so pull it out and don't worry if it breaks
For me too.
Thanks for this video guys. It helped me reinstall my trap. 👍👍👏👏👏
Thank you. After watching many videos... this helped me. From a single mom
thank you - this helped but I couldn't see which way round the rubber washer was and had to good 'shamford edge' until a friend said I probably meant 'chamfered'. For anyone else you need to put the stretchy washer over the pipe from the wall with the pointy bit pointing at the trap
thank you so much for this tutorial! i declogged our kitchen sink easily . thumbs up
thanks for this I dont have to cut through the waste out flow pipe to fit a tee and pit an air addmittance valve on top ,so this saves me a lot of trouble ,thanks
Thanks for the video. It was informative. Can you tell me what material is the bottle trap used in the video made of?
Love the accent
This Video helped me immensely! Thank You. Is it similar procedure for fitting on the chrome metal version of the bottle trap?
we want mobile number
Merci beaucoup pour les infos.
What is the name of the top part with teo inlets? Please share a link of where I can get one
favorite chenal.
Thanks a lot, easy to understand. I managed to fix mine.
Thanks for this helpful video
Thanks, good work
Without applying Teflon tape?
The Conical Washer need to be fixed how? You also have Ring and Flat Washers, how to fix?
I have a leak on mine, is there meant to be a black and blue washer ?
Thank you, this was helpful.
Great video
2:55 you are still turning clockwise to tighten.
Thanks!
thank you
a small mistake at the end of the video screwing back on is clockwise not anti-clockwise
It's a left handed thread... so no mistake.
I have cleaned the trap but sink still getting full of water
I also put a cleaning rod through the pipe
good
where do you get the 40 to 32mm adaptor from?
Bar-tech hardware shop awailable
The music is annoying.
great
Please send me reppring
Nico
I guess this will be better if there's subtitle
Ok
P
Оггшлщддддддл
Please lose the annoying music!