КОМЕНТАРІ •

  • @Roca89
    @Roca89 6 років тому +127

    Hey Andrew, usually you want power to the hour meter through the engine oil pressure sensor, that way you are sure that you are only counting real running hours... and not just hours that someone forgot to turn the key off ( this happens a lot) probably that is why you werent receiving any positive.

    • @WAVETUBE84
      @WAVETUBE84 4 роки тому +5

      Good idea!

    • @andrewchristian2996
      @andrewchristian2996 3 роки тому +2

      Was just about to type this

    • @mr.createandfix5504
      @mr.createandfix5504 3 роки тому +1

      @@andrewchristian2996 me too

    • @alexinnewwest1860
      @alexinnewwest1860 2 роки тому +1

      Actually bobcat does this from factory. There will be a oil pressure switch somewhere on the engine specifically for the hourmeter

  • @LightningFabrication
    @LightningFabrication 6 років тому +97

    check for a ground when the engine is running. the ground is switched through the oil pressure sending unit. If there's oil pressure the engine is running . The hour meter won't run up time if there isn't any oil pressure.

    • @treeclimbing7798
      @treeclimbing7798 6 років тому +4

      Lightning Fabrication Sounds like you know these machines.

    • @Guillotines_For_Globalists
      @Guillotines_For_Globalists 6 років тому +7

      That would be a lot more accurate than having it rack up time when the key was on. Not that you would have much time with key on, but you never know.

    • @SantaClaw
      @SantaClaw 5 років тому +7

      Yup, the ground for the hour gauge switches via the oil pressure switch or ECM if you have one of those.

    • @gunnyoorah1846
      @gunnyoorah1846 3 роки тому

      @@Guillotines_For_Globalists deep state is government and dark cult culture. Balance is coming bring people to justice and demand justice. People will be called out for everything they did. U know who u are.
      Msgt D Oorah

      TODAY April 26 UPDATE
      DEFCON LEVEL 5 (Fade Out). G'D is Seventeen✝ listen follow
      👺☠NAZISM OCCULT DEEPSTATE have control and ruling these DEMONRATS with GOP TRAITORS ALL. They are now FASCISE SOCIALIST, THEY FOLLOW THE RULES OF THE CCP (Chinese communist party). The unfaithful SINNERS agencies of NIH FBI/CIA/NSA/FEMA- NEW DEATHCAMPS THE CONGRESS THE SENATE: DOJ = DEPT. OF NO JUSTICE. ALL are saying lies Protection only for the blood lines, elites, officials, bankers, etc. Not We The People✝
      DO NOT BELIEVE THE FAKE soulless Media. LOST is the VOICE OF THE AMERICAN PEOPLE, STAND BY: Warriors of G'D got this. WE BELIEVE IN G'D HIS WORD RULES ALL.
      THEY are AFFAID ...They hate not knowing what is coming. Be Afraid you who caused the Horror.
      WAKE UP DEMONS...
      You soulless collaborators fake Lier's Media: D.I.S.C. (Distributive Idea Suppression Complex)

      TRY REPORTING THIS or just COLABORATE YOU WHO WORK FOR THE OCCULT MEDIA : REV.14
      The Mark is upon you👺

      WHERE ARE THEY TAKING THE SLAVES. ALL BOARDER CAGED CHILDREN. SLAVES SOLD TO PEDOPHILES. NIH evil agency paying Occult evil. WHERE ARE THE CHILDREN BEING TAKEN AND GOING! Share this message please. They are covid positive and being release into your
      💖UNITED STATES FOR AMERICA 💖
      ✝G'D WRATH IS HERE HIS JUDGEMENT IS FINAL, WE THE FEW will Enforce His LAW. G'D SONG IS EVERYWHERE., "LISTEN"
      "✝ALL THE CHILDREN ARE NOT FOR SALE, NOR SLAVERY, NOR TRAFFICKING, NOR SACRIFING.✝"
      Watch the Movie, by Juan: ✝Sound of Freedom✝ .... Pedophilia around the World
      We The Few are back were banned, thank you JC KAY , some of my troops are like you. We got your message. We expected this attack and were not taken by surprise. We continue with you and others .. Our love , our light, our strength and protection ALL for you JC KAY and UTSAVA at Flattenthecurve and All the Warriors. STOP the D.I.S.C.
      " ✝ALL CHILDREN ARE NOT FOR SALE; NOR SLAVERY; NOR SACRIFICE ­✝
      " 💖­All Our Children WILL NEVER BE ALONG. G'D SPEED PATRIOTS. WWG1WGA!"
      "Freedom is not Free'''
      DOMINION OCCULT AI MACHINES are still in use around the world to control elections . The OCCULT CCP has control of all the DEMONrats and GOP TRAITORS. All you collaborators who support the Occult .. Prepare all you sinners, G'D Justice is upon you and OURS!!. FEAR is what make you weak, you know not what is coming for you! Righteous ones believe in yourself.
      We The Few. Are fighting Demonrats in the EVIL OCCULT DUMPS in DC underground. Do not believe the FAKE news. PROTECT your Children/your People. Be Calm.
      Pray for the Good Children of the Earth. We Believe in G'D and his WORD/LAW we all Follow, Warriors Will protect you all. We Believe and keep fighting for FREEDOM & JUSTICE. Justice is being served, believe. FREE WILL is your strength. Demonrats WAKE UP. MAYBE NEVER see the light truth, feel G'D love. See what your Horror and Hate have done to the innocents. ✝THAT WE WITNESSED. Investigate this information and release it to the world,
      {INVESTIGATE : NIH AND FUNDING OF COVID RESEARCH IN CHINA}, if you care to, and believe,
      { Project Veritas saying "Be Brave Do Something"}.✝

    • @gunnyoorah1846
      @gunnyoorah1846 3 роки тому

      @@SantaClaw deep state is government and dark cult culture. Balance is coming bring people to justice and demand justice. People will be called out for everything they did. U know who u are.
      Msgt D Oorah

      TODAY April 26 UPDATE
      DEFCON LEVEL 5 (Fade Out). G'D is Seventeen✝ listen follow
      👺☠NAZISM OCCULT DEEPSTATE have control and ruling these DEMONRATS with GOP TRAITORS ALL. They are now FASCISE SOCIALIST, THEY FOLLOW THE RULES OF THE CCP (Chinese communist party). The unfaithful SINNERS agencies of NIH FBI/CIA/NSA/FEMA- NEW DEATHCAMPS THE CONGRESS THE SENATE: DOJ = DEPT. OF NO JUSTICE. ALL are saying lies Protection only for the blood lines, elites, officials, bankers, etc. Not We The People✝
      DO NOT BELIEVE THE FAKE soulless Media. LOST is the VOICE OF THE AMERICAN PEOPLE, STAND BY: Warriors of G'D got this. WE BELIEVE IN G'D HIS WORD RULES ALL.
      THEY are AFFAID ...They hate not knowing what is coming. Be Afraid you who caused the Horror.
      WAKE UP DEMONS...
      You soulless collaborators fake Lier's Media: D.I.S.C. (Distributive Idea Suppression Complex)

      TRY REPORTING THIS or just COLABORATE YOU WHO WORK FOR THE OCCULT MEDIA : REV.14
      The Mark is upon you👺

      WHERE ARE THEY TAKING THE SLAVES. ALL BOARDER CAGED CHILDREN. SLAVES SOLD TO PEDOPHILES. NIH evil agency paying Occult evil. WHERE ARE THE CHILDREN BEING TAKEN AND GOING! Share this message please. They are covid positive and being release into your
      💖UNITED STATES FOR AMERICA 💖
      ✝G'D WRATH IS HERE HIS JUDGEMENT IS FINAL, WE THE FEW will Enforce His LAW. G'D SONG IS EVERYWHERE., "LISTEN"
      "✝ALL THE CHILDREN ARE NOT FOR SALE, NOR SLAVERY, NOR TRAFFICKING, NOR SACRIFING.✝"
      Watch the Movie, by Juan: ✝Sound of Freedom✝ .... Pedophilia around the World
      We The Few are back were banned, thank you JC KAY , some of my troops are like you. We got your message. We expected this attack and were not taken by surprise. We continue with you and others .. Our love , our light, our strength and protection ALL for you JC KAY and UTSAVA at Flattenthecurve and All the Warriors. STOP the D.I.S.C.
      " ✝ALL CHILDREN ARE NOT FOR SALE; NOR SLAVERY; NOR SACRIFICE ­✝
      " 💖­All Our Children WILL NEVER BE ALONG. G'D SPEED PATRIOTS. WWG1WGA!"
      "Freedom is not Free'''
      DOMINION OCCULT AI MACHINES are still in use around the world to control elections . The OCCULT CCP has control of all the DEMONrats and GOP TRAITORS. All you collaborators who support the Occult .. Prepare all you sinners, G'D Justice is upon you and OURS!!. FEAR is what make you weak, you know not what is coming for you! Righteous ones believe in yourself.
      We The Few. Are fighting Demonrats in the EVIL OCCULT DUMPS in DC underground. Do not believe the FAKE news. PROTECT your Children/your People. Be Calm.
      Pray for the Good Children of the Earth. We Believe in G'D and his WORD/LAW we all Follow, Warriors Will protect you all. We Believe and keep fighting for FREEDOM & JUSTICE. Justice is being served, believe. FREE WILL is your strength. Demonrats WAKE UP. MAYBE NEVER see the light truth, feel G'D love. See what your Horror and Hate have done to the innocents. ✝THAT WE WITNESSED. Investigate this information and release it to the world,
      {INVESTIGATE : NIH AND FUNDING OF COVID RESEARCH IN CHINA}, if you care to, and believe,
      { Project Veritas saying "Be Brave Do Something"}.✝

  • @Mad-Duk_Machine_Werkes
    @Mad-Duk_Machine_Werkes 6 років тому +47

    All hour meters have constant power without the key- then they get a ground signal ONLY when engine is running, NOT when key on- bet one of those wires became grounded once oil pressure came up........

    • @gunnyoorah1846
      @gunnyoorah1846 3 роки тому

      deep state is government and dark cult culture. Balance is coming bring people to justice and demand justice. People will be called out for everything they did. U know who u are.
      Msgt D Oorah

      TODAY April 26 UPDATE
      DEFCON LEVEL 5 (Fade Out). G'D is Seventeen✝ listen follow
      👺☠NAZISM OCCULT DEEPSTATE have control and ruling these DEMONRATS with GOP TRAITORS ALL. They are now FASCISE SOCIALIST, THEY FOLLOW THE RULES OF THE CCP (Chinese communist party). The unfaithful SINNERS agencies of NIH FBI/CIA/NSA/FEMA- NEW DEATHCAMPS THE CONGRESS THE SENATE: DOJ = DEPT. OF NO JUSTICE. ALL are saying lies Protection only for the blood lines, elites, officials, bankers, etc. Not We The People✝
      DO NOT BELIEVE THE FAKE soulless Media. LOST is the VOICE OF THE AMERICAN PEOPLE, STAND BY: Warriors of G'D got this. WE BELIEVE IN G'D HIS WORD RULES ALL.
      THEY are AFFAID ...They hate not knowing what is coming. Be Afraid you who caused the Horror.
      WAKE UP DEMONS...
      You soulless collaborators fake Lier's Media: D.I.S.C. (Distributive Idea Suppression Complex)

      TRY REPORTING THIS or just COLABORATE YOU WHO WORK FOR THE OCCULT MEDIA : REV.14
      The Mark is upon you👺

      WHERE ARE THEY TAKING THE SLAVES. ALL BOARDER CAGED CHILDREN. SLAVES SOLD TO PEDOPHILES. NIH evil agency paying Occult evil. WHERE ARE THE CHILDREN BEING TAKEN AND GOING! Share this message please. They are covid positive and being release into your
      💖UNITED STATES FOR AMERICA 💖
      ✝G'D WRATH IS HERE HIS JUDGEMENT IS FINAL, WE THE FEW will Enforce His LAW. G'D SONG IS EVERYWHERE., "LISTEN"
      "✝ALL THE CHILDREN ARE NOT FOR SALE, NOR SLAVERY, NOR TRAFFICKING, NOR SACRIFING.✝"
      Watch the Movie, by Juan: ✝Sound of Freedom✝ .... Pedophilia around the World
      We The Few are back were banned, thank you JC KAY , some of my troops are like you. We got your message. We expected this attack and were not taken by surprise. We continue with you and others .. Our love , our light, our strength and protection ALL for you JC KAY and UTSAVA at Flattenthecurve and All the Warriors. STOP the D.I.S.C.
      " ✝ALL CHILDREN ARE NOT FOR SALE; NOR SLAVERY; NOR SACRIFICE ­✝
      " 💖­All Our Children WILL NEVER BE ALONG. G'D SPEED PATRIOTS. WWG1WGA!"
      "Freedom is not Free'''
      DOMINION OCCULT AI MACHINES are still in use around the world to control elections . The OCCULT CCP has control of all the DEMONrats and GOP TRAITORS. All you collaborators who support the Occult .. Prepare all you sinners, G'D Justice is upon you and OURS!!. FEAR is what make you weak, you know not what is coming for you! Righteous ones believe in yourself.
      We The Few. Are fighting Demonrats in the EVIL OCCULT DUMPS in DC underground. Do not believe the FAKE news. PROTECT your Children/your People. Be Calm.
      Pray for the Good Children of the Earth. We Believe in G'D and his WORD/LAW we all Follow, Warriors Will protect you all. We Believe and keep fighting for FREEDOM & JUSTICE. Justice is being served, believe. FREE WILL is your strength. Demonrats WAKE UP. MAYBE NEVER see the light truth, feel G'D love. See what your Horror and Hate have done to the innocents. ✝THAT WE WITNESSED. Investigate this information and release it to the world,
      {INVESTIGATE : NIH AND FUNDING OF COVID RESEARCH IN CHINA}, if you care to, and believe,
      { Project Veritas saying "Be Brave Do Something"}.✝

  • @mac4life55
    @mac4life55 5 років тому +17

    "Unless it's some new computer controlled piece of garbage" my favorite line.

  • @BarnStangz
    @BarnStangz 6 років тому +4

    The Power Probe is such a life saver, one of the best things in my shop, amazing how much time it saves! People that work on their junk need to get one for sure! Thanks for sharing!

    • @AndrewCamarata
      @AndrewCamarata 6 років тому +2

      Yeah, great tool. Glad you liked it.

  • @robocop6666666
    @robocop6666666 5 років тому +3

    Nothing seems to phase you out andrew a young man of many trades🇬🇧

  • @gagevelasquez2442
    @gagevelasquez2442 4 роки тому +1

    Everyone strives to be someone\ something. I never really wanted to do anything minus be recognized for my hard work and knowledge. Everytime I watch ur channel I almost always learn something new. If there is anyone u should have as an idol its Andrew. This man is so smart and has the means and energy for all. I great mentor for a hardworking soul. No homo

  • @Military-Museum-LP
    @Military-Museum-LP 6 років тому +1

    Ciao Andrew. You reminding of the first Bobcat I drove in the 60's. Wisconsin air cooled gas motor with a belt drive clutch. Like a snowmobile type clutch. Thanks Andrew.

  • @MartyInTheWoods
    @MartyInTheWoods 5 років тому +29

    5:57 snap, crack, whack whack whack - There you go, thats how you get it out! LOL

  • @shanemturner
    @shanemturner 4 роки тому

    Like Roca89 said, it will only be live when the machine is running, not when key-on or off. love your videos

  • @johnscally255
    @johnscally255 6 років тому +2

    You Guys are getting a lot of Snow, We are getting a lot of snow in RedDeer Alberta. Canada. We enjoy your videos.Thanks sir.

  • @gsbmullins809
    @gsbmullins809 4 роки тому +2

    Love your videos man watch them all the time you do good work also

  • @marty0715yt
    @marty0715yt 6 років тому

    You could also take an infrared reading of the engine temp and write that on the gauge to give you an idea of what your actually running temp is. I saw this and went on ebay and bought a digital meter with sensor for $16.00!!! Great inspiration you gave me. Yep that thar diesel is a big step in power !!! I have a Cat 257 tracked . What a hoot! Thanks!

  • @ron827
    @ron827 5 років тому +7

    Replacing a dozen or more temp gauges is impressive experience.

  • @wolfmanwolf4656
    @wolfmanwolf4656 6 років тому +4

    Nice video like always, thank you for your time and energy. Greetings from the old country.

    • @gunnyoorah1846
      @gunnyoorah1846 3 роки тому

      deep state is government and dark cult culture. Balance is coming bring people to justice and demand justice. People will be called out for everything they did. U know who u are.
      Msgt D Oorah

      TODAY April 26 UPDATE
      DEFCON LEVEL 5 (Fade Out). G'D is Seventeen✝ listen follow
      👺☠NAZISM OCCULT DEEPSTATE have control and ruling these DEMONRATS with GOP TRAITORS ALL. They are now FASCISE SOCIALIST, THEY FOLLOW THE RULES OF THE CCP (Chinese communist party). The unfaithful SINNERS agencies of NIH FBI/CIA/NSA/FEMA- NEW DEATHCAMPS THE CONGRESS THE SENATE: DOJ = DEPT. OF NO JUSTICE. ALL are saying lies Protection only for the blood lines, elites, officials, bankers, etc. Not We The People✝
      DO NOT BELIEVE THE FAKE soulless Media. LOST is the VOICE OF THE AMERICAN PEOPLE, STAND BY: Warriors of G'D got this. WE BELIEVE IN G'D HIS WORD RULES ALL.
      THEY are AFFAID ...They hate not knowing what is coming. Be Afraid you who caused the Horror.
      WAKE UP DEMONS...
      You soulless collaborators fake Lier's Media: D.I.S.C. (Distributive Idea Suppression Complex)

      TRY REPORTING THIS or just COLABORATE YOU WHO WORK FOR THE OCCULT MEDIA : REV.14
      The Mark is upon you👺

      WHERE ARE THEY TAKING THE SLAVES. ALL BOARDER CAGED CHILDREN. SLAVES SOLD TO PEDOPHILES. NIH evil agency paying Occult evil. WHERE ARE THE CHILDREN BEING TAKEN AND GOING! Share this message please. They are covid positive and being release into your
      💖UNITED STATES FOR AMERICA 💖
      ✝G'D WRATH IS HERE HIS JUDGEMENT IS FINAL, WE THE FEW will Enforce His LAW. G'D SONG IS EVERYWHERE., "LISTEN"
      "✝ALL THE CHILDREN ARE NOT FOR SALE, NOR SLAVERY, NOR TRAFFICKING, NOR SACRIFING.✝"
      Watch the Movie, by Juan: ✝Sound of Freedom✝ .... Pedophilia around the World
      We The Few are back were banned, thank you JC KAY , some of my troops are like you. We got your message. We expected this attack and were not taken by surprise. We continue with you and others .. Our love , our light, our strength and protection ALL for you JC KAY and UTSAVA at Flattenthecurve and All the Warriors. STOP the D.I.S.C.
      " ✝ALL CHILDREN ARE NOT FOR SALE; NOR SLAVERY; NOR SACRIFICE ­✝
      " 💖­All Our Children WILL NEVER BE ALONG. G'D SPEED PATRIOTS. WWG1WGA!"
      "Freedom is not Free'''
      DOMINION OCCULT AI MACHINES are still in use around the world to control elections . The OCCULT CCP has control of all the DEMONrats and GOP TRAITORS. All you collaborators who support the Occult .. Prepare all you sinners, G'D Justice is upon you and OURS!!. FEAR is what make you weak, you know not what is coming for you! Righteous ones believe in yourself.
      We The Few. Are fighting Demonrats in the EVIL OCCULT DUMPS in DC underground. Do not believe the FAKE news. PROTECT your Children/your People. Be Calm.
      Pray for the Good Children of the Earth. We Believe in G'D and his WORD/LAW we all Follow, Warriors Will protect you all. We Believe and keep fighting for FREEDOM & JUSTICE. Justice is being served, believe. FREE WILL is your strength. Demonrats WAKE UP. MAYBE NEVER see the light truth, feel G'D love. See what your Horror and Hate have done to the innocents. ✝THAT WE WITNESSED. Investigate this information and release it to the world,
      {INVESTIGATE : NIH AND FUNDING OF COVID RESEARCH IN CHINA}, if you care to, and believe,
      { Project Veritas saying "Be Brave Do Something"}.✝

  • @danielcostner4106
    @danielcostner4106 6 років тому +6

    love your videos Andrew keep up the good work thanks for taking the time to share

  • @bencrawford4748
    @bencrawford4748 6 років тому +1

    i love how Andrew calls everything that is made out of plastic, digital, or cheap metal a piece of garbage. so fucking true

  • @robocop6666666
    @robocop6666666 5 років тому +6

    That music is from a Dutch ambulance site I watch it all the time

  • @RossMacRae
    @RossMacRae 6 років тому +5

    Great video. Love the on-board view and talking.

    • @gunnyoorah1846
      @gunnyoorah1846 3 роки тому

      deep state is government and dark cult culture. Balance is coming bring people to justice and demand justice. People will be called out for everything they did. U know who u are.
      Msgt D Oorah

      TODAY April 26 UPDATE
      DEFCON LEVEL 5 (Fade Out). G'D is Seventeen✝ listen follow
      👺☠NAZISM OCCULT DEEPSTATE have control and ruling these DEMONRATS with GOP TRAITORS ALL. They are now FASCISE SOCIALIST, THEY FOLLOW THE RULES OF THE CCP (Chinese communist party). The unfaithful SINNERS agencies of NIH FBI/CIA/NSA/FEMA- NEW DEATHCAMPS THE CONGRESS THE SENATE: DOJ = DEPT. OF NO JUSTICE. ALL are saying lies Protection only for the blood lines, elites, officials, bankers, etc. Not We The People✝
      DO NOT BELIEVE THE FAKE soulless Media. LOST is the VOICE OF THE AMERICAN PEOPLE, STAND BY: Warriors of G'D got this. WE BELIEVE IN G'D HIS WORD RULES ALL.
      THEY are AFFAID ...They hate not knowing what is coming. Be Afraid you who caused the Horror.
      WAKE UP DEMONS...
      You soulless collaborators fake Lier's Media: D.I.S.C. (Distributive Idea Suppression Complex)

      TRY REPORTING THIS or just COLABORATE YOU WHO WORK FOR THE OCCULT MEDIA : REV.14
      The Mark is upon you👺

      WHERE ARE THEY TAKING THE SLAVES. ALL BOARDER CAGED CHILDREN. SLAVES SOLD TO PEDOPHILES. NIH evil agency paying Occult evil. WHERE ARE THE CHILDREN BEING TAKEN AND GOING! Share this message please. They are covid positive and being release into your
      💖UNITED STATES FOR AMERICA 💖
      ✝G'D WRATH IS HERE HIS JUDGEMENT IS FINAL, WE THE FEW will Enforce His LAW. G'D SONG IS EVERYWHERE., "LISTEN"
      "✝ALL THE CHILDREN ARE NOT FOR SALE, NOR SLAVERY, NOR TRAFFICKING, NOR SACRIFING.✝"
      Watch the Movie, by Juan: ✝Sound of Freedom✝ .... Pedophilia around the World
      We The Few are back were banned, thank you JC KAY , some of my troops are like you. We got your message. We expected this attack and were not taken by surprise. We continue with you and others .. Our love , our light, our strength and protection ALL for you JC KAY and UTSAVA at Flattenthecurve and All the Warriors. STOP the D.I.S.C.
      " ✝ALL CHILDREN ARE NOT FOR SALE; NOR SLAVERY; NOR SACRIFICE ­✝
      " 💖­All Our Children WILL NEVER BE ALONG. G'D SPEED PATRIOTS. WWG1WGA!"
      "Freedom is not Free'''
      DOMINION OCCULT AI MACHINES are still in use around the world to control elections . The OCCULT CCP has control of all the DEMONrats and GOP TRAITORS. All you collaborators who support the Occult .. Prepare all you sinners, G'D Justice is upon you and OURS!!. FEAR is what make you weak, you know not what is coming for you! Righteous ones believe in yourself.
      We The Few. Are fighting Demonrats in the EVIL OCCULT DUMPS in DC underground. Do not believe the FAKE news. PROTECT your Children/your People. Be Calm.
      Pray for the Good Children of the Earth. We Believe in G'D and his WORD/LAW we all Follow, Warriors Will protect you all. We Believe and keep fighting for FREEDOM & JUSTICE. Justice is being served, believe. FREE WILL is your strength. Demonrats WAKE UP. MAYBE NEVER see the light truth, feel G'D love. See what your Horror and Hate have done to the innocents. ✝THAT WE WITNESSED. Investigate this information and release it to the world,
      {INVESTIGATE : NIH AND FUNDING OF COVID RESEARCH IN CHINA}, if you care to, and believe,
      { Project Veritas saying "Be Brave Do Something"}.✝

  • @Oxy_Cotton
    @Oxy_Cotton 4 роки тому +1

    I have a tip for beginner operators, when digging holes lift the lift arm a little then tilt the bucket making all wheels or all of the tracks are in contact with the ground ! I see so many newbies tilt the buck and lift the front wheels of the ground then try to push, it's all about traction !

  • @laszlovass7326
    @laszlovass7326 6 років тому +1

    "New computer controlled piece of garbage." Exactly! On a new machine this includes replacing an expensive panel or computer or circuit board. Great video! Thanks Andrew.

  • @RRRRR7-c7r
    @RRRRR7-c7r 6 років тому +4

    Andrew has a lot of good points in which he talks about computer controlled machines. I have overridden automated machines with simple relays before bypassing the computer inputs. It would be a great idea if a company was built around making machines as simple and mechanical as possible. You have to ask yourself what advantages are we getting for all these electronics? I mean diesel engines were getting great mileage 30 years ago. Maybe 18 20 mpg. Now with all these emissions and electronics their efficiencies are shrinking. A $70,000 Truck why? Even if you have company making a couple million a year it's bad investment. At the same time if your truck was stripped down to the frame it would look the same as a Truck made 30 years ago with more or less steel. So they ad new shaped pieces of sheet metal every couple of years and a new price with a bunch of electronics that you'll never utilize. It would be cool if a company would say offer a rebuilt trucks from the 90's like F250's or F350's with a Powerstroke engines. Totally rebuild them from the ground up with all upgrades. It would be like buying a F250 in the nineties when it came off the lot. Then sell them for like 60% of the price of a new one. I think that is what Contractors are looking for a diesel with very few electronics.

    • @dieselmex1808
      @dieselmex1808 Рік тому

      You’re just stuck in the past and probably broke. I paid 84k for my 2019 2500 and it makes me a shit load of money all while only getting 10MPG on a good day

  • @mebel81959
    @mebel81959 5 років тому +11

    By using ground oil pressure to the clock, the clock is designed to measure the working hours of the engine.

  • @okiekidd6091
    @okiekidd6091 4 роки тому +1

    Andrew your fix on the hour meter will work fine but what was happening on the wiring was the hour meter has power all the time, it actually receives ground when the machine has hydraulic pressure hence engine is running. I know this because on my 743B my meter quit working and I did all the things you checked and didn't understand. Then I checked the wiring schematic and found the "ground" wire went to a hydraulic switch on top of the pump and when the pump was working hydraulic pressure then grounded the hour meter. My wire had broke at an electrical junction, I rewired around the connection and now my meter works fine off the hydraulic pressure, not exactly engine running, thats why the key didn't affect the hour meter. I would guess this is how most Bobcat hour meters are wired. FYI

  • @glenngoodale1709
    @glenngoodale1709 6 років тому +4

    I think it will be even harder to trouble shoot these new Electric Vehicles as they have many computers in them . thanks for your great videos

  • @usernamempk
    @usernamempk 4 роки тому +5

    “That’s how you get it out!”

  • @bhogg92
    @bhogg92 4 роки тому

    Bobcat actually sent you the correct part on the first try! Impressive.

  • @halleffect1
    @halleffect1 5 років тому +14

    like Eric O says, "every tool has a hammer side"

  • @LumpyFPV
    @LumpyFPV 3 роки тому

    "... Unless it's some new computer controlled piece of garbage..." 🤣🙏🏼 Always quality entertainment.

  • @peterhaan9068
    @peterhaan9068 6 років тому +9

    Andrew - I'm thinking you should check the thermostat also. I would also get rid of the 'idiot light' for your oil pressure and put a real oil pressure gauge in.

    • @AndrewCamarata
      @AndrewCamarata 6 років тому +6

      Yeah, not a bad idea. But at least the light is working.

    • @AndrewCamarata
      @AndrewCamarata 6 років тому +7

      I might sell that skid steer, that turbo tracked machine is so much nicer.

    • @alleycatvietnam
      @alleycatvietnam 6 років тому +3

      I was going to suggest the same.

    • @edwardgarea7650
      @edwardgarea7650 4 роки тому

      For what it’s worth, I’d see the skid steer, too. It’s reaching the point where the costs are outweighing the advantages. That you got this far with the Bobcat is testament to your ingenuity and mechanical skills. I’ve known a few Bobcat owners during the Ingersoll-Rand regime and all are united in saying that the older the machine got, the less reliable it became, almost exponentially. Everyone of them ditched their Bobcats in favor of other brands.

  • @daanbogaerts6301
    @daanbogaerts6301 6 років тому +46

    2:48 coputer controlled garbage😂😂

  • @Dextrian1
    @Dextrian1 4 роки тому

    This is the only time I've ever seen you prefer something digital over analog!

  • @Unionjoint
    @Unionjoint 4 роки тому +1

    Hey Andrew, can you make a video on A) the process of how you check if electricity is flowing correctly to broken parts in your equipment and B) how do you know if it's for example a bad wire, a bad connector versus a bad gauge or bad part. It seems like this is important to understand, when you fix your equipment. Thanks.

  • @ZacVaper
    @ZacVaper 6 років тому +13

    When you tested old gauge, it moved just as far as new one. Now that it's warmer out, has the gauge moved past cold?

  • @Tafs315
    @Tafs315 6 років тому +1

    I know this is an old post but if you want turbo like your track machine put one on this it's really simple to do you have the welding expercence just do it

  • @farmingboysYT
    @farmingboysYT 5 років тому +5

    you have 10 machines and that temrature gage never was bad but i installed 1000 of these😂 baddest excuse ever

  • @Watchyn_Yarwood
    @Watchyn_Yarwood 6 років тому +1

    I agree with you 100% on the importance of a temperature gauge! I don't operate anything without a functioning temperature gauge. I would like to know if you ever found a waterproof hour meter! I sure would like to know!

    • @AndrewCamarata
      @AndrewCamarata 6 років тому +1

      The digital hour meter in my yanmar has been working for 1000hours and 3 years now, and it gets wet. All the mechanical ones I bought broke instantly.

    • @Watchyn_Yarwood
      @Watchyn_Yarwood 6 років тому

      Thanks @@AndrewCamarata

  • @donnlowe9129
    @donnlowe9129 5 років тому +5

    Being an hour meter I would expect it would only have power when the engine is running because that's what it does it's record the operating hours. Maybe if you put your test probe in one of those leads with the engine running you would find it had power. I don't think the hour meter should be powered constantly. Just my guess.

  • @michaelovitch
    @michaelovitch 6 років тому +4

    You prepare the hungry monster for its new claws ?
    Some demolition snacks soon maybe ?
    Also,why the front tires are backwards ? to turn easier ?

  • @williamlemaire9882
    @williamlemaire9882 6 років тому +10

    Hey Andrew, I'm a big fan... keep up the great vids!

  • @mechcntr7185
    @mechcntr7185 5 років тому +3

    The temperature gauge should generally show the same temperature no matter what the outside conditions are. I wonder if your thermostat is bad or like you said bad temperature sender. The temperature on that gauge looked way too low.

  • @rickirelan8385
    @rickirelan8385 5 років тому +4

    My power probe has saved me enormous amounts of time, have you ever taken a basic electricity course Andrew?

  • @michael7423
    @michael7423 6 років тому +2

    Thanks for another great how to video Andrew

  • @chadglenn8009
    @chadglenn8009 6 років тому +1

    Great video,hope you have some more coming soon.

    • @AndrewCamarata
      @AndrewCamarata 6 років тому

      Uploading a short pickup repair video now.

  • @noe29933
    @noe29933 4 роки тому +1

    You know Andrew you should treat yourself to a nice holiday your always working I know you love your work but its important too to rest

  • @markwys
    @markwys 3 роки тому

    Now I have to go watch one of the summer videos.....he's making me cold!

  • @jamelofrazier
    @jamelofrazier 5 років тому

    The problem can be also if the new gauge you interchange in place with the old existing gauge ohm tolerance range is different ,if so it will not function properly . The temperature gauge and the temperature sending unit ohms has to match tolerance .I had the same issue with my Bobcat 753 machine using the same exact gauges he used in this video and wasn't get an accurate reading. After troubleshooting and conformation from my local dealership I had to use the original exact temperature gauge that came in the machine from factory .

  • @dansbrown1313
    @dansbrown1313 5 років тому

    A simple technique I use to reduce or eliminate vibration damage to wire ends is to wrap them around a Phillips screwdriver and then you can stretch it if you need to. (We mostly use Allen head or hex head screws and drivers in Canada) but I think US folks use Phillips.

  • @infl
    @infl 6 років тому +17

    What if one of the wires only sent voltage to the hour meter when the engine was running? I’m not sure, I don’t have much vehicle wiring experience but it could be a possibility

    • @AndrewCamarata
      @AndrewCamarata 6 років тому +14

      Server Pr0n yeah, you're probably right, I bet that yellow wire would turn into a ground when the engine was running

    • @stanpatterson5033
      @stanpatterson5033 6 років тому +3

      That's the logical way of wiring an hourmeter, so that it registers only when the engine is running, but from the manufacturers' viewpoint, they want every second to count, so they wire them from a key-on perspective.

    • @infl
      @infl 6 років тому +3

      Yeah, that seems more reasonable, you can see the hours when you turn the key at all and from a wiring standpoint it seems a lot easier, especially in a vehicle with no computer

    • @michaelovitch
      @michaelovitch 6 років тому +1

      @@stanpatterson5033
      It's maybe simply wired key on engine off to allow the guy checking it to avoid it to start the engine of each machine.
      Those things are more often serviced by an other person than the operator.
      The purpose of an hour meter is to be checked regularly,that mean a guy do it specialy,and dont need the engine to run at this precise moment.

  • @larrrymeyers6695
    @larrrymeyers6695 6 років тому +1

    if you do a video about the bobcat could you talk about what to look for when buying one?? tossing it back and forth between a dozer or skid steer and dont know much abouy skidsteers. love your videos

    • @AndrewCamarata
      @AndrewCamarata 6 років тому +2

      A dozer and skid steer are pretty different machines. Dozers can just really flatten stuff. Where skid steers can do tons of different things. As far as buying them. I guess just try to make sure it works properly and isn't leaking.

  • @larryehrlich8702
    @larryehrlich8702 6 років тому +5

    If your thermostat is operating correctly the temperature gauge should be in the normal green range...even if it is - 30f.

    • @DDFJ1230
      @DDFJ1230 5 років тому

      Some machines dont have a thermostat

  • @ultrametric9317
    @ultrametric9317 4 роки тому

    The sayings of AC - "WE'LL SEE WHAT HAPPENS." "THAT'S HOW YOU DO THAT." "OK THAT'S FIXED." :)

  • @froggleggers1805
    @froggleggers1805 6 років тому

    You should make your own mulch and sell it from all the burned material and small brush. You could even buy a chipper attachment with a hitch and chip it. I used to have a buddy in the tree service that would dump his wood chips on my property and I would turn it over from time to time, within a year it was stable and really dark. I then sold it to my customers.

  • @einfelder8262
    @einfelder8262 5 років тому +22

    That computerised rubbish - I prefer the old stuff - I've had no luck with manual hour gauges, the digital ones are better....Yep, OK :)

  • @dansbrown1313
    @dansbrown1313 5 років тому

    I like his videos so much I watch them again:)

  • @odc43054
    @odc43054 6 років тому +1

    Extra likes for creative use of the Channelocks!

  • @adamekennedy
    @adamekennedy 6 років тому +3

    If you want to correct the number on the hour gauge you could plug it into a power supply and leave it running for a certain amount of time

    • @mikespain8655
      @mikespain8655 5 років тому +1

      The person that buys this Bobcat when you sell it, is going to want an accurate reading on the hour meter. Making a note of when it was replaced with a picture of old gauge would be helpful.

    • @gunnyoorah1846
      @gunnyoorah1846 3 роки тому

      deep state is government and dark cult culture. Balance is coming bring people to justice and demand justice. People will be called out for everything they did. U know who u are.
      Msgt D Oorah

      TODAY April 26 UPDATE
      DEFCON LEVEL 5 (Fade Out). G'D is Seventeen✝ listen follow
      👺☠NAZISM OCCULT DEEPSTATE have control and ruling these DEMONRATS with GOP TRAITORS ALL. They are now FASCISE SOCIALIST, THEY FOLLOW THE RULES OF THE CCP (Chinese communist party). The unfaithful SINNERS agencies of NIH FBI/CIA/NSA/FEMA- NEW DEATHCAMPS THE CONGRESS THE SENATE: DOJ = DEPT. OF NO JUSTICE. ALL are saying lies Protection only for the blood lines, elites, officials, bankers, etc. Not We The People✝
      DO NOT BELIEVE THE FAKE soulless Media. LOST is the VOICE OF THE AMERICAN PEOPLE, STAND BY: Warriors of G'D got this. WE BELIEVE IN G'D HIS WORD RULES ALL.
      THEY are AFFAID ...They hate not knowing what is coming. Be Afraid you who caused the Horror.
      WAKE UP DEMONS...
      You soulless collaborators fake Lier's Media: D.I.S.C. (Distributive Idea Suppression Complex)

      TRY REPORTING THIS or just COLABORATE YOU WHO WORK FOR THE OCCULT MEDIA : REV.14
      The Mark is upon you👺

      WHERE ARE THEY TAKING THE SLAVES. ALL BOARDER CAGED CHILDREN. SLAVES SOLD TO PEDOPHILES. NIH evil agency paying Occult evil. WHERE ARE THE CHILDREN BEING TAKEN AND GOING! Share this message please. They are covid positive and being release into your
      💖UNITED STATES FOR AMERICA 💖
      ✝G'D WRATH IS HERE HIS JUDGEMENT IS FINAL, WE THE FEW will Enforce His LAW. G'D SONG IS EVERYWHERE., "LISTEN"
      "✝ALL THE CHILDREN ARE NOT FOR SALE, NOR SLAVERY, NOR TRAFFICKING, NOR SACRIFING.✝"
      Watch the Movie, by Juan: ✝Sound of Freedom✝ .... Pedophilia around the World
      We The Few are back were banned, thank you JC KAY , some of my troops are like you. We got your message. We expected this attack and were not taken by surprise. We continue with you and others .. Our love , our light, our strength and protection ALL for you JC KAY and UTSAVA at Flattenthecurve and All the Warriors. STOP the D.I.S.C.
      " ✝ALL CHILDREN ARE NOT FOR SALE; NOR SLAVERY; NOR SACRIFICE ­✝
      " 💖­All Our Children WILL NEVER BE ALONG. G'D SPEED PATRIOTS. WWG1WGA!"
      "Freedom is not Free'''
      DOMINION OCCULT AI MACHINES are still in use around the world to control elections . The OCCULT CCP has control of all the DEMONrats and GOP TRAITORS. All you collaborators who support the Occult .. Prepare all you sinners, G'D Justice is upon you and OURS!!. FEAR is what make you weak, you know not what is coming for you! Righteous ones believe in yourself.
      We The Few. Are fighting Demonrats in the EVIL OCCULT DUMPS in DC underground. Do not believe the FAKE news. PROTECT your Children/your People. Be Calm.
      Pray for the Good Children of the Earth. We Believe in G'D and his WORD/LAW we all Follow, Warriors Will protect you all. We Believe and keep fighting for FREEDOM & JUSTICE. Justice is being served, believe. FREE WILL is your strength. Demonrats WAKE UP. MAYBE NEVER see the light truth, feel G'D love. See what your Horror and Hate have done to the innocents. ✝THAT WE WITNESSED. Investigate this information and release it to the world,
      {INVESTIGATE : NIH AND FUNDING OF COVID RESEARCH IN CHINA}, if you care to, and believe,
      { Project Veritas saying "Be Brave Do Something"}.✝

    • @gunnyoorah1846
      @gunnyoorah1846 3 роки тому

      @@mikespain8655 deep state is government and dark cult culture. Balance is coming bring people to justice and demand justice. People will be called out for everything they did. U know who u are.
      Msgt D Oorah

      TODAY April 26 UPDATE
      DEFCON LEVEL 5 (Fade Out). G'D is Seventeen✝ listen follow
      👺☠NAZISM OCCULT DEEPSTATE have control and ruling these DEMONRATS with GOP TRAITORS ALL. They are now FASCISE SOCIALIST, THEY FOLLOW THE RULES OF THE CCP (Chinese communist party). The unfaithful SINNERS agencies of NIH FBI/CIA/NSA/FEMA- NEW DEATHCAMPS THE CONGRESS THE SENATE: DOJ = DEPT. OF NO JUSTICE. ALL are saying lies Protection only for the blood lines, elites, officials, bankers, etc. Not We The People✝
      DO NOT BELIEVE THE FAKE soulless Media. LOST is the VOICE OF THE AMERICAN PEOPLE, STAND BY: Warriors of G'D got this. WE BELIEVE IN G'D HIS WORD RULES ALL.
      THEY are AFFAID ...They hate not knowing what is coming. Be Afraid you who caused the Horror.
      WAKE UP DEMONS...
      You soulless collaborators fake Lier's Media: D.I.S.C. (Distributive Idea Suppression Complex)

      TRY REPORTING THIS or just COLABORATE YOU WHO WORK FOR THE OCCULT MEDIA : REV.14
      The Mark is upon you👺

      WHERE ARE THEY TAKING THE SLAVES. ALL BOARDER CAGED CHILDREN. SLAVES SOLD TO PEDOPHILES. NIH evil agency paying Occult evil. WHERE ARE THE CHILDREN BEING TAKEN AND GOING! Share this message please. They are covid positive and being release into your
      💖UNITED STATES FOR AMERICA 💖
      ✝G'D WRATH IS HERE HIS JUDGEMENT IS FINAL, WE THE FEW will Enforce His LAW. G'D SONG IS EVERYWHERE., "LISTEN"
      "✝ALL THE CHILDREN ARE NOT FOR SALE, NOR SLAVERY, NOR TRAFFICKING, NOR SACRIFING.✝"
      Watch the Movie, by Juan: ✝Sound of Freedom✝ .... Pedophilia around the World
      We The Few are back were banned, thank you JC KAY , some of my troops are like you. We got your message. We expected this attack and were not taken by surprise. We continue with you and others .. Our love , our light, our strength and protection ALL for you JC KAY and UTSAVA at Flattenthecurve and All the Warriors. STOP the D.I.S.C.
      " ✝ALL CHILDREN ARE NOT FOR SALE; NOR SLAVERY; NOR SACRIFICE ­✝
      " 💖­All Our Children WILL NEVER BE ALONG. G'D SPEED PATRIOTS. WWG1WGA!"
      "Freedom is not Free'''
      DOMINION OCCULT AI MACHINES are still in use around the world to control elections . The OCCULT CCP has control of all the DEMONrats and GOP TRAITORS. All you collaborators who support the Occult .. Prepare all you sinners, G'D Justice is upon you and OURS!!. FEAR is what make you weak, you know not what is coming for you! Righteous ones believe in yourself.
      We The Few. Are fighting Demonrats in the EVIL OCCULT DUMPS in DC underground. Do not believe the FAKE news. PROTECT your Children/your People. Be Calm.
      Pray for the Good Children of the Earth. We Believe in G'D and his WORD/LAW we all Follow, Warriors Will protect you all. We Believe and keep fighting for FREEDOM & JUSTICE. Justice is being served, believe. FREE WILL is your strength. Demonrats WAKE UP. MAYBE NEVER see the light truth, feel G'D love. See what your Horror and Hate have done to the innocents. ✝THAT WE WITNESSED. Investigate this information and release it to the world,
      {INVESTIGATE : NIH AND FUNDING OF COVID RESEARCH IN CHINA}, if you care to, and believe,
      { Project Veritas saying "Be Brave Do Something"}.✝

  • @demoman1282
    @demoman1282 4 роки тому

    “New electric piece of garbage” I’m dying lmao that’s hilarious and so true

  • @SportsKid006-milbert
    @SportsKid006-milbert 6 років тому

    Very helpful. I’m working on some gauge troubleshooting now

  • @helicopter269
    @helicopter269 5 років тому

    Hi Andrew there is a product called ACF 50 in the pink can its the best thing since sliced bread for electrics open the plugs and a little squirt no more electrical trouble ever check out some vids it is amazing Paul.

  • @megape95
    @megape95 6 років тому +1

    Hey. Seems like the oil pressure light doesnt work too. And the engine has to be running to get the negative signal. Sometimes there are 2 sensors. One for the hourmeter and one for the oil light. Other machines got a relay to eliminate the second switch. As you need both a normally closed for the light a normally open for hours

  • @Military-Museum-LP
    @Military-Museum-LP 6 років тому +1

    They say once you've had a track machine is tough going back to tires. I'm still hoping I can trade this year.

  • @samuelbacon1596
    @samuelbacon1596 6 років тому +1

    Andy great job!!! thanks for one more fixed. Hey in your travels if you come across a old/ used S130 bobcat which now is the S-450 . In the day I had two BOBCAT S-130 pedals 773-G hand controls both great machine but the S-130 turn on a dime. Super great little machine. I think maybe with the right tires and bucket . You may have got in that basement / house job your working on right now maybe not....I used that machine S-130 with the right bucket and tires to get inside a summer cottage dig out the dirt floor to put stone down SAVE MY BACK......A another great machine is the S-100 which bobcat only made for few year in 2007-2011 another great machine for small areas like basement work or inside demo work take care JUNKMANDO

  • @offthegridoffthegrid4602
    @offthegridoffthegrid4602 6 років тому +1

    enjoyed the video some hour meters operate w engine running only not just key in on position

    • @okiekidd6091
      @okiekidd6091 4 роки тому

      Actually the hour meter works off the hydraulic pump pressure, which only works of course when the engine is running. I have a 743B and found that out when my meter quit working. The hour meter is hot all the time with key on, and when the machine has hydraulic pressure the hour meter is then grounded and works. I followed the wiring schematic and found the wire from the pressure switch had broke at the electrical plug in the wiring.

  • @robw1571
    @robw1571 4 роки тому

    You know something else is broken when he fixes the item from the title and there is still 70% of the video to go :)

  • @dylanfox8530
    @dylanfox8530 4 роки тому

    Andrew is my fucking spirit animal.

  • @skynet000001
    @skynet000001 6 років тому

    i have a bobcat 743 and love it.

  • @ronaldheit196
    @ronaldheit196 4 роки тому

    Andrew, Google the wiring harness or repair manual for your unit.
    I do that all the time for my equipment.

  • @itsnotfar
    @itsnotfar 3 роки тому

    Put the hour gauge in the engine area. It will stay dryer and dry out when the engine gets warm. Always moisture getting into things.

  • @SuperSpencerspencer
    @SuperSpencerspencer 6 років тому +2

    thanks for such great videos

  • @simonrichard9873
    @simonrichard9873 6 років тому +1

    That's the real deal! A Melroe Bobcat!

  • @buddyvibe9043
    @buddyvibe9043 6 років тому +1

    is the engine operating at the proper temp? you would use more fuel if you were in a cold engine situation ? ..

  • @ottocarr3688
    @ottocarr3688 4 роки тому

    The after market temperature gauge may not have a wire going from the threaded port to the gauge. It very well could be a flexible tube filled with inert gas. As the engine heats, the gas expands, moving the needle. Otto

  • @jakecazander1234
    @jakecazander1234 5 років тому +1

    Great videos Andrew. Just wondering what kind of test light you are using.

    • @AndrewCamarata
      @AndrewCamarata 5 років тому

      This is the best test light. It makes diagnosing issues like this much easier. amzn.to/2S27yBP

  • @richardkan8499
    @richardkan8499 3 роки тому

    Like how you bashed the hours meter out!

  • @mohabatkhanmalak1161
    @mohabatkhanmalak1161 4 роки тому

    The previous hours can be added to the new gauge by electronic input - the instructions on how to do it will be in the instructions leaflet.

  • @camrevill5089
    @camrevill5089 6 років тому

    Excellent video andrew! And I dont even own a bobcat!

  • @jamesconner8275
    @jamesconner8275 6 років тому +14

    Does Andrew ever stop and rest?

    • @LLFailsxD
      @LLFailsxD 5 років тому +1

      Probably not

    • @markbonham3477
      @markbonham3477 5 років тому +3

      It has been reported thru the grapevine that he occasionally sleeps or naps but, there is no real proof!

    • @RickF1558
      @RickF1558 5 років тому +3

      @@markbonham3477 I one time saw him standing still and pondering for a short period of time. It gave the appearance of rest, but now I'm not so sure.

    • @tinderbox218
      @tinderbox218 5 років тому +2

      Of course, but why not repair a few things while you're resting?

    • @edwardgarea7650
      @edwardgarea7650 4 роки тому

      When you own your own company with as many machines as Andrew has, there is little time for rest, unless you’re figuring to go out of business. Machines break, and when you buy them used, in many cases you’re buying someone else’s headache.

  • @curtissettles2641
    @curtissettles2641 2 роки тому

    teaching how to run machines is too machine ., and operator specific, imo
    ive seen you use a machine and say that the hoses are hooked up backwards. dont worry about those videos, how to operate. enjoying riding shotgun on your adventures. thanks for all you do

  • @josephsfields
    @josephsfields 6 років тому +1

    My guess is at 8:14 the yellow wire is the signal wire for when the engine is running. That's what you are counting the hours on, right? Seems you may have configured the timer for "key on" hours. Just a guess and glad Sadie (?) was keeping an eye on you incase you succumbed to the elements. I noticed that you never bitch about the cold in your videos.

  • @g41thomas
    @g41thomas 6 років тому +1

    Andrew can you please tell me where you got that testing probe and the name of it, please? I need one too. Again thank you for your interesting videos. Very motivating.

    • @Dc-nc3ws
      @Dc-nc3ws 5 років тому

      It’s called a power probe. Amazon or eBay. Worth every penny. Get the entire kit

  • @slrn832472577
    @slrn832472577 5 років тому

    "some new computer controlled piece of garbage" ...he's right on that

  • @jimsmith3887
    @jimsmith3887 5 років тому

    making some videos about machine operation sounds good

  • @ZeroFloat.
    @ZeroFloat. 6 років тому +1

    Andrew, you said you have been in excavating business 8 years, business-wise what did you do before that?

    • @AndrewCamarata
      @AndrewCamarata 6 років тому +3

      I mostly worked at the post office. But I was doing side work too.

  • @none8901
    @none8901 2 місяці тому

    At 2;20 you said one of the wires goes to the temperature guage itself. Did you mean it goes to the temperature sensor itself?

  • @evanszymanski346
    @evanszymanski346 5 років тому

    Yea lol that wheeled skid steer u are driving is the bobcat 130 it’s not meant to have a lot of power lol it’s a small skid steer

  • @diablofocker1
    @diablofocker1 5 років тому +1

    I'd be willing to bet that yellow wire grounds when the engine is running, the hour meter i would assume only operates while the engine is running.

  • @forddiesel2001
    @forddiesel2001 6 років тому +1

    How many hours does the rest of your equipment have. Just curious.

  • @CumminsCat
    @CumminsCat 5 років тому +1

    Do you think this same gauge will work on a 843? The connections all match.

    • @AndrewCamarata
      @AndrewCamarata 5 років тому +1

      Yeah, all gauges are pretty much like that. Even on other brands and autos

    • @CumminsCat
      @CumminsCat 5 років тому

      Ok, I only found 1 place that had one. It looks like they've been discontinued but idk.

  • @James_Innes
    @James_Innes 5 років тому +1

    Maybe that spare wire was for the instrument lights?

  • @johncollado1151
    @johncollado1151 6 років тому

    Good video, Andrew. The other hole on the gauge console is for an oil gauge, right? Isn't that as important to have? More difficult to change out? Equipment operational videos would be nice. Thanks.

    • @AndrewCamarata
      @AndrewCamarata 6 років тому +2

      Fuel gauge, I guess they removed it when that machine was converted to propane.

  • @ThinkHarder
    @ThinkHarder 3 роки тому

    new quote from andrew, thats probably accurate

  • @electron1988
    @electron1988 5 років тому

    Text time you get a chanse, you should try making a swedish torch out of a stump. It might burn out faster.

  • @zlatanzifovskijr4576
    @zlatanzifovskijr4576 2 роки тому

    Great video but I have a question for my 743 it has a new temperature gauge and a new sender but the gauge was always on hot even when the engine is cold so I fixed it to go back to cold but now it doesn’t move at all. Now the arrow only stays before the green?

    • @AndrewCamarata
      @AndrewCamarata 2 роки тому

      how did you fix it? make sure the wire is not broken or grounded out from the gauge to the sensor. Make sure the gauge gets power/ground.

    • @zlatanzifovskijr4576
      @zlatanzifovskijr4576 2 роки тому

      Andrew Camarata i did use a power probe tester to see if there is power from the purple wire to the gauge and there is I believe in doing it correctly. And the way I fixed the gauge goin all the way to hot is I saw that the metal bracket that secures the gauge to the panel was shorting the positive and purple wire or vise versa.

  • @rudyfisher3032
    @rudyfisher3032 3 роки тому

    Andrewa list of the when you Barnet and everything in the in your driveway in our put it with some dirt somewhere and keep mixing it together and let it compos download but you have some good compost Soil

  • @Martin-iw2re
    @Martin-iw2re 4 роки тому

    Hello mate, I own a Komatsu Sk714-5 and my temp gauge stays at the same level just like your bobcat, it never ever gets higher than that, ive also used for 20 days the concrete mixing bucket as an atachment but it was still at the same low level, at periodic maintenance i use a very good coolant and periodically wash the radiotors to keep them clean but idk if it is from that or i have broken sensor or thermostat ?

    • @AndrewCamarata
      @AndrewCamarata 4 роки тому +1

      Usually they should come up 1/3 of the way. There are test that can be done to see whats going on if its not.

  • @jusb1066
    @jusb1066 6 років тому +1

    the hour gauge could mount under the hood, you don really need to see it in the cab

    • @AndrewCamarata
      @AndrewCamarata 6 років тому

      There is already a spot for it in the cab.

  • @steveo1574
    @steveo1574 5 років тому +2

    That's how you get it out.

  • @mikerom9958
    @mikerom9958 6 років тому +1

    Get yourself some gloves Andy, I can see its got colder again with you.

  • @Akotski-ys9rr
    @Akotski-ys9rr 3 роки тому

    wouldn't the hour gauge reset every time you power off the machine?