HOW TO MAKE A TRILOBITE DOG SLIP COLLAR
Вставка
- Опубліковано 27 лис 2024
- In this video, I will show you how to make a Paracord Trilobite Dog Slip Collar.
🔔SUBSCRIBE
• / @paracordingaround
😀WEBSITE
List of all the products and equipment I use in my videos: paracordingaro...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the products links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
Have you got a video suggestion? Drop a comment below👇
---Trilobite Paracord Weave Measurement Guide----
1Foot per 1 Inch in length.
how do u attach the second O ring at the end? watched 3 of your slip collar video's not and i still have no idea... is it with the Fib? or is it part of the weave that you attach it? can you show us how to finish this collar?
I love it. Our doberman puppy arrives June 30, and I'm anxious to make this collar for her. Thanks so much.
How/when you join the two rings? Watched both slip collar videos...but both are just "straight’?!
Looks very cool! 🤩 I would like to understand how you calculate the paracord for this or that collar? Thank you 🥰
Love it and I think I understand but I wish you would have shown the whole thing in the picture in other words both rings
if I'm making a collar that will be 18" will I have to use 18 foot of paracord in total or 18" for both coloured sides?
Never mind. I figured it out. It is 18 foot each side for those of you who wanted to know. I’ve made 5 of them now
Isabelle Wells that was my question as well. Thanks for clearing up the confusion for me. I’m stuck at home because of this Covid19 and trying to keep my mind active but with limited supplies. 😇
@@denisegriffor5602 me same
@@denisegriffor5602 Could you clarify it a little more for me please? is it 18 foot of each colour for an 18 inch collar? or 18 foot of the two colours combined, so (for example) 9 foot of blue and 9 foot of red?
Good morning, could you tell me how many meters of paracord you used in this video,
Thank you very much, I'm from Brazil and I thought this collar was amazing.
How do you push the rings through each other when they are the same size?
You make your cord go inside by pushing it through one, you don't try to pass a ring into the other
I really like this weave as it's easy to do and feels nice - easy tutorial. Watch for when they switch the O Ring over towards the beginning (0:27 then 0:40) so you can make sure you are the right way up before you start weaving! The bigger problem is the weave is too thick and wide (if you are using Paracord 550) to feed through the 1" O Ring to finish. Interestingly, this part isn't shown on the video...
Hi, thanks for watching! I am using 550 in the video🙂
Is 1ft per inch each color. Or just overall so if I need 20 inch collar I need 20ft togther or do I need 20 ft green and 20ft red ?
Of each color
It would have been so easy to show how to turn it into a slip collar. Why don’t people show all the steps
Hi, thank you for your feedback, at the time of filming I assumed that part was common knowledge so I didn't include it. You just push the collar into one of the rings to complete.
@@Paracordingaround it took me many years in life to never assume. Remember the saying. ASSume Makes an Ass out of U and ME. So many newbies watch these videos so never hurts to include everything. The experienced can skip over it.
Q cantidad de paracord? Gracias
how do you push the collar in to make it a slip collar
Hello! What is the wooden thing you are using to put the collar on while you weave, and keep it in the right place/measurement?
It is called a Jig.
Hello! A few questions for you:
I would like to know how you figure out the length of your collar. For example, if the dog's neck measures to 15 inches how would you do that with this style? I know the amount of cord ratio, but do you add any extra braid with it, or?
Also, I'm honestly unfamiliar with slip collars, so would the leash clip onto one of the rings and that's how you would keep it tightened on the dog?
Thank you, love this style!
Hi, with slip collars they need to be big enough to easily slip over your dogs head. An easy way do to that is to take your tape measure, or even some string will do, pop it loosely around your dogs neck so it creates a full circle, then try to slip it over your dogs your dogs head, if its too small, slowly keep making your circle bigger until it easily slips over the dogs head and that will give you the length you need to make your collar.
the leash will clip onto the o ring that doesn't have the paracord going through it. the idea of the collar is to stop dogs pulling on leashes. While standing still or walking with a loose leash the collar will sit loosely on your dog but when they start to pull on the leash the collar will tighten, when it gets too tight it forces the dog to back off and the dog will eventually figure out that if they stop pulling on the leash, the collar wont tighten so they stop doing it. these collars are not meant to be wore all day, only during walks. hope this helps, let me know how you go!
Is this quick deployable?
Hi, no it's not.
Wait, so is this two collars or just one? I have two colors I want to work with
Why does it say 1 inch per foot? If you're making a two-color collar, it appears that you need 1 inch for each. I was tying to make a 24 in collar and cut 24 feet. Now I need another 24 feet?
for a 24 inch collar with 2 colors you will need 24 feet off each color so that will be 48 feet total
yeah this was unclear and now I've cut my last bit of string wrong.. fml lol
I love this. What size o ring did you use?
Thank you, I use 1 inch size o rings, I have added a link in the description for the exact ones I use:)
Hi! What scissors do you use? They cut the paracord on a video as a paper
Hi, they are 'Fiskars micro tip easy action' scissors, they are fantastic!!!
Great video!! But how do you make it a slip collar? Maybe I missed something? I just can't figure it out :( sorry
Hi, thank you, all you need to do is push the collar through one of the rings:)
Paracordingaround Oh!! That makes sense, thank you so much for replying so quickly. I have started a collar for my pug and then onto my pit bull! Thanks again :)
Sorry, just cant figure out how do you put the collar through when both rings are the same size?
@@melissakacuiba5172 you push the collar back through one of the rings and there you have it :)
How many meters of string did you use? And how long was the collar?
How much long ?
PETS LIFE how much rope did you use? and what's the radius of the collar?
1 cm of product is how much cm of paracord?
Use an app. Inches to metric
Yes u showed how 2 do the weave, but u never showed how u finished the collar off
Hi, you just push the finished weave into one of the rings and pull it through to complete.
Pagan aesa love
Is there any one who can doYTHIS WITHOUT IT BEING A TOTAL FUCK UOP?!?!?!?!?!?!?!?!?!?!?