I love your espresso topper. You are sooo creative!!! I ordered mine directly from the LOL site and I received the display box. I’m hesitant to open it based on the issues I’ve been hearing about. But I will forge ahead with fingers crossed. 😂😂
The latte machine u can actually pop off the the little part where u turn the lever to open n close. It pops right off n easily back in. It makes it so much easier to clean this machine. I was playing around with mine n realized it can come off. The other machines tho u can only take out the little resin holder which doesn't help clean where the resin drips out if it makes a mess. Thankfully when I tried each of mine it didn't get to messy n a qtip cleaned up any resin. I still love these although I'm only using them as decoration after trying each one:) Loved the little design in the latte, so cute!
Agreed with not like the yellow, but love the plates and cups anyways. I wonder if the pink espresso machine comes with different colored cups and plates.
This is what scares me about the mess. But this is their 1st run with the machines, so we’ll have to see what they come out with next. I didn’t really find these in scale with the make-it-mini stuff though 🤷🏼♀️❤️
Hello :)! i agree several items are not in scale but i don't mind :) i have not had any issues myself i will try to get some baby wipes though several have mentioned they make clean up easier :)
@@ccstoysandcreations Yes, just make sure they have alcohol in them, because that cuts through resin very well. A lot of baby wipes now don't have alcohol so they're safer for baby skin, so I have to find the ones that aren't actually for babies.. heh
I’m not going to use resin in mine. They just seem problematic. I got the pink one. My kitchen I’m customizing is cream colored with blue, mint, gray, and pink tile work. So it will look really nice.
Luv ur creativity and ideas 💡! In the instructions it actually says any resin inside ur machine u can cure it and then pick it out and alot of people have had problems with the resin coming out of the machine because they stick the bottle as hard as they can in the machine but it has to be able to "burp" the air out of the resin bottle. I also think u could pierce the bottom of the resin bottle while it's upside down in the machine. I havent tried that yet though.
Hi CC! I got the purple boba machine, but I didn’t want to deal with a mess so I did not put the resin in it! I opted for just doing it the usual way and I still get the cute machine!
Hi, I think using plastic to cover it up was no no to me because I used it on mine. I used wet diaper wipes mixed with alcohol to clean it up. It works better for me afterwards. I used to wipe my hands and my craft desk mat to clean the resin out also after I finished with each uses.
Oh my gosh, I love your video so much❤ I love Miniverse appliances😊 I just got the soda machine I’m hoping for the lemon lime one😊 I have the Expresso Latte pink machine, and boba purple tea ❤❤ almost done with the series 😮 I really love how you made the coffee ☕️
i went to walmart last night with my scale😂😂and finally got the popsicles and cookie one that i’ve been wanting. so glad someone weighed them to help us find them.
Hi Poisonivy618 oh my i have wanting another set of popsicles !!! Glad you finally found them :). I hope no-one gave you a hard time at walmart :). How much do the popsicles weigh?
I warm the resin first, ive had no problems with my machines. Maybe try warming the resin first and not pushing it into the machine, if there is no air flow inti the bottles the resin wont come out.
Resin will come off of most plastics, just like it does the tape, once cured. I have cured it inside the squeeze tips, then popped it out with a toothpick, rather than cleaning it. Plus once cured it isn't toxic to touch. I "think" the people that have a huge mess to clean up are not doing it right. Instead of putting the bottle in upside down, I think they are filling the tank with resin, which will cause a mess, obviously. (just my opinion, based on what I saw someone do, I have no idea if it is true. One person almost squeezed it in, then at the last second realized she maybe wasn't supposed to do that and stopped) If I can ever get my hands on one of these, I plan to test it out. I am going to cure the resin inside after I'm finished, and see if I can just pop it out, or pull it out with some tweezers, etc. That's how I clean up the cups I mix colors in, and my utensils. (attempt this at your own risk.. 😅) I think if the plastic is smooth, it will work. If it has any kind of abrasion to it, scratched up, etc. It won't work.
I love yellow so I really love the cups and plates 😊 I loved that you did latte art to the coffee, what a great idea! ❤
Thanks so much! 😊
I love your espresso topper. You are sooo creative!!! I ordered mine directly from the LOL site and I received the display box. I’m hesitant to open it based on the issues I’ve been hearing about. But I will forge ahead with fingers crossed. 😂😂
:) when i get a new item oh my i can't wait to open them and use them lol
I like both of your coffee machines,Pretty colors 😊pink and green
Thank you 😊
Ah so relaxing to watch your video
😌💙🤍
Thank you very much Haruhi!
The latte machine u can actually pop off the the little part where u turn the lever to open n close. It pops right off n easily back in. It makes it so much easier to clean this machine. I was playing around with mine n realized it can come off. The other machines tho u can only take out the little resin holder which doesn't help clean where the resin drips out if it makes a mess. Thankfully when I tried each of mine it didn't get to messy n a qtip cleaned up any resin. I still love these although I'm only using them as decoration after trying each one:) Loved the little design in the latte, so cute!
Thank you very much Callielou!
Agreed with not like the yellow, but love the plates and cups anyways. I wonder if the pink espresso machine comes with different colored cups and plates.
Hi Hula!!! Yes it does blue ones! Have you gotten your package by chance?
This is what scares me about the mess. But this is their 1st run with the machines, so we’ll have to see what they come out with next. I didn’t really find these in scale with the make-it-mini stuff though 🤷🏼♀️❤️
Hello :)! i agree several items are not in scale but i don't mind :) i have not had any issues myself i will try to get some baby wipes though several have mentioned they make clean up easier :)
@@ccstoysandcreations Yes, just make sure they have alcohol in them, because that cuts through resin very well. A lot of baby wipes now don't have alcohol so they're safer for baby skin, so I have to find the ones that aren't actually for babies.. heh
Too bad about that! I thought they'd be in the same scale!
I’m not going to use resin in mine. They just seem problematic. I got the pink one. My kitchen I’m customizing is cream colored with blue, mint, gray, and pink tile work. So it will look really nice.
You kitchen sounds amazing!!!!!
Luv ur creativity and ideas 💡! In the instructions it actually says any resin inside ur machine u can cure it and then pick it out and alot of people have had problems with the resin coming out of the machine because they stick the bottle as hard as they can in the machine but it has to be able to "burp" the air out of the resin bottle. I also think u could pierce the bottom of the resin bottle while it's upside down in the machine. I havent tried that yet though.
Thank you Tina i will have to give it a try :)
Hi CC! I got the purple boba machine, but I didn’t want to deal with a mess so I did not put the resin in it! I opted for just doing it the usual way and I still get the cute machine!
Hello :) Skylarmc93!!! I want to keep some mugs with no resin they are too cute! Can't blame you for not using the machine lol :)
Hi y'all! I used polymer clay in my mugs instead of resin, given the UV resin tends to not set and leak in opaque containers. Hope this helps! 🤗
Great tip! It sure does! Thank you !
Hi, I think using plastic to cover it up was no no to me because I used it on mine. I used wet diaper wipes mixed with alcohol to clean it up. It works better for me afterwards. I used to wipe my hands and my craft desk mat to clean the resin out also after I finished with each uses.
thank you Sonyasaville I need to buy some baby wipes :) i have had that on my mind and eveytime i go to a store i forget lol :)
Oh my gosh, I love your video so much❤ I love Miniverse appliances😊 I just got the soda machine I’m hoping for the lemon lime one😊 I have the Expresso Latte pink machine, and boba purple tea ❤❤ almost done with the series 😮 I really love how you made the coffee ☕️
Thank you so much 😊
i went to walmart last night with my scale😂😂and finally got the popsicles and cookie one that i’ve been wanting. so glad someone weighed them to help us find them.
Hi Poisonivy618 oh my i have wanting another set of popsicles !!! Glad you finally found them :). I hope no-one gave you a hard time at walmart :). How much do the popsicles weigh?
Awesome Coffee Latte! You are so creative!😊
Glad you liked it Ozwomanid57!
I love your coffee froth design, such a great idea!
Thank you! 😊
Hi CC! I'm having buyers remorse lol! I bought the Pink one. I just wish they were designed better. 🤔
No no you will be fine :) they are very fun.
@@ccstoysandcreations Thank you! 💜
I have not decided if I want to get this yet. I like the dishes, but not the mess.
Hi Tracey! I myself have not had any major issues :) in my first unboxing of these everything worked out fine :)
And I love your background❤you can add mini veres pots too
Thank you
I warm the resin first, ive had no problems with my machines. Maybe try warming the resin first and not pushing it into the machine, if there is no air flow inti the bottles the resin wont come out.
Hi Danielle hope you are having an awesome week!
Resin will come off of most plastics, just like it does the tape, once cured. I have cured it inside the squeeze tips, then popped it out with a toothpick, rather than cleaning it. Plus once cured it isn't toxic to touch. I "think" the people that have a huge mess to clean up are not doing it right. Instead of putting the bottle in upside down, I think they are filling the tank with resin, which will cause a mess, obviously. (just my opinion, based on what I saw someone do, I have no idea if it is true. One person almost squeezed it in, then at the last second realized she maybe wasn't supposed to do that and stopped) If I can ever get my hands on one of these, I plan to test it out. I am going to cure the resin inside after I'm finished, and see if I can just pop it out, or pull it out with some tweezers, etc. That's how I clean up the cups I mix colors in, and my utensils. (attempt this at your own risk.. 😅) I think if the plastic is smooth, it will work. If it has any kind of abrasion to it, scratched up, etc. It won't work.
Hi Shari!! Love the part you say *(attempt this at your own risk) love it! lol I may try the curing and toothpick idea :) thank you very much!
Love this ❤❤😊
Thank you very much
,
Thank you
Your welcome
Try pouring rubbing alcohol into where the resin goes! Thar should clean out any excess resin!
Thank you
Please do another giveaway soon for 11k!
Soon :)
😍😍😍😍😍 0:20
Thank you Monique :)
What about bit cling film or parcment paper
We can certainly try!
they dont get full of resin if you put the bottle in them properly like they show you to do
Thank you Michael!
Or tiny piping bag
Yes that may work :)
Hello!👋🏼
Hello!
Hi CC, I’m looking to trade the pickles for a ham. Are you interested? Thank you
Sure :) can you please email me :)