Funny I stumbled on this channel, I just sent this to my son. Been telling him he needs to get rid of the non turbo eclipse and grab himself a civic hatch an k swap it. UNLESS......... he could do a k swap in that eclipse🤔🤔🤔 I have never seen it done not sure if it's possible or worth. But if it can be done would be hell of alot better if my son is hell bent to keep the car.
Humble Performance please make a kit for 8th or 9th gen civic si!!!!! So hard finding turbo kits for Fa5 and Fg2s now that most popular kits are discontinued.
if i got the budget kit but wanted to change the wastegate later on, what size wastegate would i have to purchase ? would a tial 44 work or would i have to get a pte 46?
I was checking your website and was wondering if these kits would fit fg2? Since it's not noted. Want to get a turbo kit but everything i find has ram horn and I'm looking for sidewinder
@@TheBb6prelude I have a k24a8 that made 375, buddy has a a3 making 350, I just feel that they make all these “ budget “ videos… why not a base model k series… just my .000002 cents
Im building my K20A2 on the side getting it ready for CSS to be sleeved plus rods pistons. Wonder how much that turbo kit could add to the wheels might just have to order one. 🔥🔥🔥🔥 💯🤙🏼
I know you probably get this a lot but is a 50 degree vtc truly worth it? Im going to be using a k24a2 out of an 08 tsx going to leave the stock oil pump in there.
I’m running a TSX bottom, type S head, TSX cams, 50 VTC, type s oil pump, RBC along w a bunch of other on goodies. Definitely worth it! KPro definitely solidifies the setup. Like the other guy said, the oil pump helped higher revs to see more top end.
At, 9: 26 I know exactly what you fellows are saying at humble performance. I tried to explain the exact same thing on a another UA-cam channel here in Australia, called fullboost... But got the typical response from people who don't know anything about Hondas. Not only people in the comments on fullboost were saying I'm full of shit, and the 2 hosts of that channel were ragging on me as well!!... But I guess that is what you get with ignorant people who don't know anything about Hondas.🤦♂️🤡 I tried explaining, 600hp can be reliable But a big but is that you need to make sure you are on your maintenance your tune is on point and don't hot lap the car at the drag strip ect.🤦♂️
I have 175k on mine , just waiting for used car prices to crash so I can buy a daily work truck, then I'm going to turbo the 8th gen for weekend fun, if it blows up , il just buy a used or rebuilt motor and do it again.
You know they got knowledge if they dropping all this FREE info that most wont tell their customers.
Kenny..you forgot.... last of all it depends on how you drive it also will determine if itll pop or not.
See how to build Honda horse power book. Gives you everything you need to know.
Because they know you don’t have the same tuners 😂
Well done! Quit making me want to build a Honda!!! 👍🏼
Lolll that’s what I’m saying bro.
You guys are killing it with these parts man I love humble performance in-house parts💪🏼🔥Stay humble baby
Great seeing the growth it only takes a sneeze love the context
I need a turbo kit now for my K24A2 CRX!!
I fucking love the intros when he explains and then the music starts
I’m part of the first v3 batch! Excited to get my car ripping like this one
I've been waiting to see Omar's hatch on here! Super clean ride!
sheesh that deal is quite crazy do you guys still have it available? I plan on getting a civic hatch this summer.
finally get to see some dyno pull on the humble 62mm turbo
Funny I stumbled on this channel, I just sent this to my son. Been telling him he needs to get rid of the non turbo eclipse and grab himself a civic hatch an k swap it.
UNLESS......... he could do a k swap in that eclipse🤔🤔🤔 I have never seen it done not sure if it's possible or worth. But if it can be done would be hell of alot better if my son is hell bent to keep the car.
Humble Performance please make a kit for 8th or 9th gen civic si!!!!! So hard finding turbo kits for Fa5 and Fg2s now that most popular kits are discontinued.
Sweet. Cant wait to get mine for my rsx. Already ordered. Just waiting for shipping. 💪🔥
Excellent advice bro. I'm new to this and look forward to a build loving your info and help!
I'm thinking of putting a k24 in my mazda... if I can learn how.
this video was really cool, thank you
God i love what you do im wanting to get a k series and k swap the world, and i absolutely love the intro song!
i would totally get one if i can get an option for hood exit and piping for center feed manifold
I got an ep3 that seriously needs this love!🤗
How is plumbing on a rear mounted radiator?
Humble Performance team are Honda Genius 😎 👌 🇵🇷 🇵🇷
Is there a fitment option that'll match up for a acura tsx? I think this setup is perfect for me
Love your vids guys....keep up the good work!!!!!!
Whats the angle of the turbo? To much will smoke oil at idle.
I need one of these kits for my ej9 build.
So for the rsx version would I have to lose/move AC or power steering ?
@humble performance - will your budget kit work with a rhd ep3?
When referring to the power figures, what fuel u guys running? E85
Bump
if i got the budget kit but wanted to change the wastegate later on, what size wastegate would i have to purchase ? would a tial 44 work or would i have to get a pte 46?
Will the budget kit fit my 2009 Honda Accord coupe?
Ordering mine ASAP!!
That is right about the k20a2
I want to get into this, but where is a good place to find a clean hatch to start?
Hi , what camera / equipment are you using? I know that subject is irrelevant but Perhaps do a video ?
If i get the V3 kit can i keep my AC, P/S & 3in.Exhaust?
Let's Goooo @humbleperformance Killing it once again! 🔥
"Let's gooo!" is BoostedBoiz's saying, "Oh boy" is Humbles.
@@M5JamesE39 thought is was brent’s saying?
Is it possible to get this kit for a 2004 Acura tsx??? love to get this kit.
If you guys would have made a v3 for the 8th gen si I would have got one
This is sick. Wonder how this swap would be in a FC rx7 for time attack
I’ll be calling you 😉 thanks
Will a k24a2 with your budget kit on a crx will be too much power? Im going k pretty soonnn
You should do auctioneer work on the side
When will you guys make a turbo budget kit for 8 gen Si?
Haha
@@CPISTOL1015 something funny
I was checking your website and was wondering if these kits would fit fg2? Since it's not noted. Want to get a turbo kit but everything i find has ram horn and I'm looking for sidewinder
what is your wheel and tire setup bro i need that
Just out of curiosity, what are benefits or advantages of a K24 block and K20A2 head?
^
@@Cutlazz k24 block high compression and more torque lower end.
K20 head more efficient and higher air flow got rev range.
@@zaneg9236 👍👍
Does the kit work with a 8th gen si ?
Can I run this with my k24a4?
Does this work for an 2004 Acura TSX?
Dropping knowledge...love it 🤓
Great info!
3 or 4 port boost controller? Why. Thanks guys
Would be nice to see them dyno the k20a3 or the k24a4s stock..
Seen a stock a3 making mid to upper 400s all stock not to long ago.
@@TheBb6prelude I have a k24a8 that made 375, buddy has a a3 making 350, I just feel that they make all these “ budget “ videos… why not a base model k series… just my .000002 cents
How does the S366 hold on with the K24 shown in the 1:38 mark? Thanks! Considering an S366
Im building my K20A2 on the side getting it ready for CSS to be sleeved plus rods pistons. Wonder how much that turbo kit could add to the wheels might just have to order one. 🔥🔥🔥🔥 💯🤙🏼
He said with rods & pistons with that kit you can make a 500-600 bullet proof
Can you make K24z7 Megasquirt harness if we send you the connectors and diy harness?
What fuel pump and injector on this set up ?
Are the kits compatible with AC?
Yes
Is there a kit for a 8th gen civic si?
Another dope build, but can you do more sohc content for us guys who are on a real budget?
Does humble ship to Canada 🇨🇦?
Nice. Can't wait for my Ima battery to die on the crz so I can talk my wife into swapping to a k20 or k24. 😉
Rsx turbo kit work in a ep3 ?
Damn id like to send a k car there to be tuned
what timing chain tensioners are you using on stock k24 turbo setups 500-700 hp
Take a guess
@@humbleperformance hahaha love it thaks.... follow up question. did you replace the TCT whit a new oem one or just left he same one?
What ecu?
How much extra is it to have the killer combo turbo kit installed onto a k20a2 swapped ek coupe?
$1800 labor
@@humbleperformance Kenny can you do remote tuning let me know if asp tanks
Yoo will this v3 kit work on a 06 Acura TSX?
I GOT A 2013 CIVIC SI IT A Z7 IS THIS OK?
Wonder how a k24/k20 frank build would do
Second this question, please collaborate
Really isn't much different .. I've used them both
is there a way to buy your clutch setup only ? if not which one is it
Buy a stage 4 or a twin disk on the web store
@@humbleperformance what about flywheel ? heard light flywheels bad for turbo ?
I have a question can you have a/c with that set up?
Yes
ship to Malaysia?
Make a kit for the 8th gen Si
I need this kit
Support the RPM act...
I know you probably get this a lot but is a 50 degree vtc truly worth it? Im going to be using a k24a2 out of an 08 tsx going to leave the stock oil pump in there.
Depends if you running a rbc manifold and I would still do a type s pump just to get more oil pressure and rev higher safely
@@ViticoBongo I will actually be running an rbc.
@@simplyklean so yes you should because that rbc works its wonders on the higher rpms and without the 50 degree vtc youre limited to its potential
@@ViticoBongo thank you!
I’m running a TSX bottom, type S head, TSX cams, 50 VTC, type s oil pump, RBC along w a bunch of other on goodies. Definitely worth it! KPro definitely solidifies the setup. Like the other guy said, the oil pump helped higher revs to see more top end.
On my list.
What about a em2 ?????????????
k24a2 ?
What’s the shop name in Omaha for Ryan? I’m from Omaha
In the video u said u were gonna tune the green car and never did what the heck I wanted to see how the used turbo was gonna do
Will there ever be a budget kit for the 8th gen si?
No. No one buys it .
wouldn't cerakoted pipes keep the heat inside rather than dissipating it into the engine bay? :P
Humble power🔥🔥🔥🔥
Why does everyone only build hatches
Humble performance I am ready bring it single can power brother 💪💪🙏💪🙏💪🙏🇵🇷🇵🇷✌️🤫🤫 flaco tech en la casa desde Waukegan Illinois!!!!
Soon!
Why camera so dark
Has anyone bought the Turbo Kit for an fd2 civic?
Slow down Kenny 😄
Wow I am tired now goodnight
CR-V head doesn't flow as well...Per Luke at 4P R40 head is best flowing head from Honda period.
At, 9: 26 I know exactly what you fellows are saying at humble performance. I tried to explain the exact same thing on a another UA-cam channel here in Australia, called fullboost... But got the typical response from people who don't know anything about Hondas. Not only people in the comments on fullboost were saying I'm full of shit, and the 2 hosts of that channel were ragging on me as well!!... But I guess that is what you get with ignorant people who don't know anything about Hondas.🤦♂️🤡
I tried explaining, 600hp can be reliable But a big but is that you need to make sure you are on your maintenance your tune is on point and don't hot lap the car at the drag strip ect.🤦♂️
Too sick 🤙🤙🤙
Whos got there v3 kit allready?
Great setup but 20+ psi on a stock k24? That's rolling the dice.
You must be new here
@@humbleperformance 😂😂😂😂
Saludos Alex
Also a tip, fix ur damn car before u modify it lol
Tired of seeing lowered cars with a wing and wheels have a clapped out engine
😅😅 you mean maintenance first. . Forget paint and wheels.
Should I get a turbo kit on my daily 08 si just hit 120k miles all stock??
I have 175k on mine , just waiting for used car prices to crash so I can buy a daily work truck, then I'm going to turbo the 8th gen for weekend fun, if it blows up , il just buy a used or rebuilt motor and do it again.
Omar little.
Rip
First comments are probably from the guys who made the vid, for algorithm.