2.4 chrysler dodge avenger timing marks (2.4 timing chain marks)

setting up the timing marks on the 2.4 dodge avenger
and how i make sure the timing is right nd we have compression
My IG: 13b_dorito
Here is some useful links for tools that you need to get this job done and that you will need on any other projects you might have!!
burrs 👉amzn.to/2UP4OvV
burrs 👉amzn.to/3b0pYNn
burrs👉amzn.to/34ilmzt
dremel 👉amzn.to/2x84b7x
safety eyeglasses
👉amzn.to/2UOATUE
air die grinder 👉amzn.to/2RgOt0K
general purpose grease
👉amzn.to/2RgSC4F
best magnetic flash light 750 lumens
👉amzn.to/2ULgmjA
my go to scanner 👉amzn.to/3he23N1
Scanners that i own and recommend 👉
amzn.to/3sKFt54
amzn.to/3o86P1r
amzn.to/3pdoSVu
amzn.to/2NlnCRZ
amzn.to/2Y7UEav
amzn.to/3qMPk8J
Head bolts for the LT engine left side "driver side" the one with the black Allen bolt 👉
amzn.to/398ddlc
Chevy LT solid lifters "make sure you look up it fits your chevy LS LT engine"👉
amzn.to/3ogU0BX
This one here is my go-to head set gasket kit "all you need to re install the heads" works for me on tahoe,silverado, suburban!!👉
amzn.to/3pcsCq5
AFM DOD lifter with spring acDelco 👉
amzn.to/3pdvRxE
My go-to favorite powerful impact gun cheaper nd better than milwaukee 👉
amzn.to/2Y5l4d0
swivel sockets 👉amzn.to/2PAPGli
metric socket kit 👉amzn.to/2MOScly
wrench set 👉amzn.to/2ZDisBq
brush kit 👉amzn.to/2NF8xZM
double side ratchet wrench
👉amzn.to/2NNSAQX
impact better than snapon and cheap
👉amzn.to/2LhrQXz
better nd cheaper than snap on
👉amzn.to/2HDWHvf
Jack stands 👉amzn.to/2NLEJe6
ratchet set 👉amzn.to/2NQkM5X
what i use to record the video
👉amzn.to/2UoMw2t
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
*Please be aware that I am not responsible for you actions in any type of way. If you get injured during the job or damage other parts including the engine I'M NOT RESPONSIBLE! Always work with safety and please do your research!!

[@pierredecimus7404]

Lol… this is my first time seeing that, humor, but fascinating😂, good job, Papito.

[@imanafrikan]

Thanks for the heads up on the timing marks, starting on a 2013 2.4 avenger.

[@user-ws5uo2rt8y]

AWESOME!!!!!! this is a wonderful encounter

[@da_nk]

That was actually very informative

[@mark_osborne]

Thank you so much !
I'm doing this job right now

[@chadgardee1496]

Love your videos man always quality work I take pride in my work too the glove trick pretty funny 😄 I usually have someone crank over and put my hand over spark plug tube hole but this way better bcz only need one person

[@TomMack530]

Lol the gloves 🧤 popping out

[@erikabouchard8825]

❤

[@coloradotrader7202]

I tried to set the timing using the OEM chain after changing valve seals. the oem chain does not have any colored links. big fail! I ordered the Cloyes chain that has colored links. should make this job a whole lot easier!

[@nigelnkunzi6414]

Hie bro the timming marks of the 2.4l is it the same as 2.0l for dodge caliber I can see the engines look the same

[@florenciomartinez3695]

after rotating engine a couple times should the marks on the oil pump chain stay where they were set at tdc

[@cdjdaniel8860]

Tengo un avenger 2.7 2008 me suena la cadena le pusieron el resorte en el tensor y todo el rollo pero sigue sonando mire un video tuyo donde pones un que proteje el tensor por si se llegara a descargar que me recomiendas mas ?
El motor ya lo han tensado y a dejado de escucharse pero esta vez se lo quite al mecanico porque no le hacia nada y lo armo pero suena poco como si rebotara la cadena

[@roybosquez7690]

That dot on crank shaft facing down is not TDC!!

[@danddcandr6719]

How do you know where the dot is supposed to be for tdc ?

[@peytonlawson8865]

Should be on the side of crank facing the front of car like 3-4 o'clock

[@danddcandr6719]

@@peytonlawson8865 yes, finally figured it out, thank you. At first I thought the cams were stuck but then remembered the second rotation on the crank and it all lined up. Just noticed the balance shaft chain off a tooth, so now it turned into a bigger job. Have to drop the oil pan. Thank you for the info though

[@DocZoidberg549]

You are completely correct. I pulled the #1 plug and used a dowl and measured it on the compression stroke. It stop going up at 3 o'clock. All the timing marks matched perfectly including the oil pump gear markings. The difference could be the after market gear/chain set. Our OEM crank gear marks were different than the replacement.

[@nigelnkunzi6414]

I thought so too myb the crankshaft gear is not the original it's aftermarket but how did the top timming marks goes on the exact place those 3 copper marks are on point if he shifts the crank shaft to match the mark point at 3 o'clock it's doesn't it mean tht even on camshafts the markson the timming chain will move off myb with 4 or 5 teeth and the other thing 8 want to ask does dodge caliber 2.0l and 2.4l hv the same timming marks and same timming chains coz I saw som hv different oil pumps other oil pumps hv mark others doesn't hv marks

[@sweetybean1]

Is the head the same on a turbo and a non-turbo head ?

[@miguelmorett2649]

Hello, How much money I would expect to pay to change the timing chain ?

[@carltonthomas4819]

Have a question when you remove head how and cams to be machined how do you get it back in timing?

[@JM8686]

Setting up the chain on the marks

[@david081809]

Timing was set perfect on my vehicle but it still acts like it’s out of timing. Takes forever to actually crank over and when it does misfires and has the rotten egg smell coming from exhaust

[@evdawg7757]

Plugged catalytic converter

[@mithoonmithoonkhan7729]

hiii