Finally saved up enough and ordered the 22 cal version like yours yesterday! Wes had one left from his recent shipment that came in. I have a carbon fiber .5L bottle off another rifle i will be installing to get the weight down a little and more shots so thats a plus. Can't wait to put it through it's paces. 😊I'll keep you informed how it shoots after i receive it. Take care and thanks Alex!😊
Wonderful! His inventory is empty now with the M60B, lol. Glad you got one coming. Try out the NSA 17.5gr .217 slugs and see how they perform in yours. JSB and AA 18gr pellets work well also. Good luck and have fun.
@@stevengoodman3498 Ya, lets hope your barrel is good as well. You will need to do a good barrel clean first, then take it out to the range and have fun.
Thanks for watching. I bought the both the rails and sling mounts off Amazon.ca. Not sure if they are still available or not. But you can try searching them. When I clicked on my account, it showed unavailable. 230mm long rail mount dovetail 22 slots 20mm width Sling Mount Plate Attachment for 20mm picatanny/weaver rail
i made a adapter to go between the bottle and gun with a quick disconnect for filling thr removing the bottle to fill is the stupidest thing i have ever seen mine wasnt as accurate as i expected so i machined a lothar walther barrel for it and its liking the 15.89s really great but then again the barrel i used loved the 15.89s before i machined it for this riffle
I bought them from this vendor off Amazon.ca However, the rail and sling mount are currently unavailable. You might need to check back from time to time. www.amazon.ca/s?srs=120784119011 Ulightfire Long Rail Mount Picatinny/Weaver Rail Base 20mm Sight Rail Suitable for Flashlight etc.Installation Sling Mount Plate Attachment for 20mm Picatinny/Weaver Rail
No, I don't have the M16 anymore. I sold that to one of the farmers last year. So I didn't get to play and experiment with it shooting slugs. But I think the M16 barrel might be the same as the M60B. Give yours a try. My M60B is shooting the NSA 17.5gr (.217 head size) at 930fps currently.
Hi I just got my PP 750 snow peak last week from Wes airgun archery for fun. Looking to increase the power. I was told to cut the hammer spring. Second stage would be to adjust the regulator by taking the gun apart and the third is to do some drilling so there's three steps as far as I understand. I don't want to go too crazy because I want to keep the shot count around 40 with a 22 caliber. Probably around 14 fpe. What's your opinion?
I have a PP700 sub 12 ft.lb pistol/carbine and it is shooting extremely accurate with the JSB RS 13.43gr pellets. I didn't do any adjustment to the gun. It depends on what you want to achieve with your PP750. I would just shoot and find the right pellets for it before making any adjustments to the HS/REG. Once you messed with any drillings, you wouldn't be able to return to original state. In any event, have fun modding it.
@@AirRiflePestings The guy that sold it to me told me to cut the hammer spring first. I guess I could work my way up cut the hammer spring and then adjust the regulator take the gun apart drilling would be the last thing. I’ll give it a shot lol. 😆
@@surreallife777 Yes, you can cut the spring shorter to help load the hammer. Experiment with it and test out how the gun performs after the mod and gradually make changes to other parts to see if it improves the performance or not. But the most important ingredient is to find the right pellet that shoots best in your gun. Good luck and have fun.
@ARP-airriflepestings I watch it because it's very interesting to see another fellow shooter develope his shooting skills 😉 I've shot for 40 years but not much with pcp and you have tought me a few things ,and your videos are interesting
@@crazycressy7986 Thank you. I am learning as much as I can on every outings. Glad to take you along with my pest control work, lol. I have to edit my older videos and repost because of issue that I got myself into recently. So, I apologize if you are watching some re-runs, lol.
Finally saved up enough and ordered the 22 cal version like yours yesterday! Wes had one left from his recent shipment that came in. I have a carbon fiber .5L bottle off another rifle i will be installing to get the weight down a little and more shots so thats a plus. Can't wait to put it through it's paces. 😊I'll keep you informed how it shoots after i receive it. Take care and thanks Alex!😊
Wonderful! His inventory is empty now with the M60B, lol. Glad you got one coming. Try out the NSA 17.5gr .217 slugs and see how they perform in yours. JSB and AA 18gr pellets work well also. Good luck and have fun.
Thank you Alex for all of your testing and tuning. Hope I get one with a great barrel. Wouldn't have bought it without your testing brother!😊
@@stevengoodman3498 Ya, lets hope your barrel is good as well. You will need to do a good barrel clean first, then take it out to the range and have fun.
Good information, I have made the same style bipod mount for my M16 bottled .25 It has been referred to as the FX Crown killer.
Nicely done!
Talking to Wes today at air gun archery and fun. Mine is in the mail. Keep the great videos coming 👍👍😎
Wonderful news. Yes, his shipment finally arrived.
Very nice setup Alex!😊
Thank you.
Hey there fellow air gunner, I really love the set up. Was wondering if you could share information for rail, and sling Mount
Thanks for watching.
I bought the both the rails and sling mounts off Amazon.ca. Not sure if they are still available or not. But you can try searching them. When I clicked on my account, it showed unavailable.
230mm long rail mount dovetail 22 slots 20mm width
Sling Mount Plate Attachment for 20mm picatanny/weaver rail
I was just wondering does the bottom trigger guard have the same dimensions and bolt holes as your fx impact? Fantastic videos!
If you were to hunt groundhogs with this gun how far of a shot would you feel comfortable taking? Thanks
It would be nice if you had links to where you bought your accessories.
i made a adapter to go between the bottle and gun with a quick disconnect for filling thr removing the bottle to fill is the stupidest thing i have ever seen mine wasnt as accurate as i expected so i machined a lothar walther barrel for it and its liking the 15.89s really great but then again the barrel i used loved the 15.89s before i machined it for this riffle
luckily the one I got is the newer model where I don't have to remove the bottle to refill. Good job with the barrel mod.
puedes colocar la descripción del alargador del riel picatiny por favor
I bought them from this vendor off Amazon.ca
However, the rail and sling mount are currently unavailable.
You might need to check back from time to time.
www.amazon.ca/s?srs=120784119011
Ulightfire Long Rail Mount Picatinny/Weaver Rail Base 20mm Sight Rail Suitable for Flashlight etc.Installation
Sling Mount Plate Attachment for 20mm Picatinny/Weaver Rail
Are you pulling those slugs on the M-16? Would you mind sharingthe tuning you have for it😊
No, I don't have the M16 anymore. I sold that to one of the farmers last year. So I didn't get to play and experiment with it shooting slugs. But I think the M16 barrel might be the same as the M60B. Give yours a try. My M60B is shooting the NSA 17.5gr (.217 head size) at 930fps currently.
Hi I just got my PP 750 snow peak last week from Wes airgun archery for fun. Looking to increase the power. I was told to cut the hammer spring. Second stage would be to adjust the regulator by taking the gun apart and the third is to do some drilling so there's three steps as far as I understand.
I don't want to go too crazy because I want to keep the shot count around 40 with a 22 caliber.
Probably around 14 fpe. What's your opinion?
I have a PP700 sub 12 ft.lb pistol/carbine and it is shooting extremely accurate with the JSB RS 13.43gr pellets. I didn't do any adjustment to the gun.
It depends on what you want to achieve with your PP750. I would just shoot and find the right pellets for it before making any adjustments to the HS/REG. Once you messed with any drillings, you wouldn't be able to return to original state.
In any event, have fun modding it.
@@AirRiflePestings The guy that sold it to me told me to cut the hammer spring first. I guess I could work my way up cut the hammer spring and then adjust the regulator take the gun apart drilling would be the last thing. I’ll give it a shot lol. 😆
@@surreallife777 Yes, you can cut the spring shorter to help load the hammer. Experiment with it and test out how the gun performs after the mod and gradually make changes to other parts to see if it improves the performance or not. But the most important ingredient is to find the right pellet that shoots best in your gun.
Good luck and have fun.
Which one is best for new user m60B or AvengX bullpup?
@@SHAHZAIBBaloch-k7j I never shot an AvengX so I can’t comment, but my M60B is very accurate.
What kind of bipod is that?
It is a knock off. Bestsight rifle bipod 7-9" from Amazon
Nice Gun m60b ❤
Thank you for watching. Ya, it is a cheaper version of FX Impact, lol.
Hi, how long is the rifle without the moderator?
Sorry for the long response. It is 30" or 762mm long.
How long is it without the moderator
It is 30" or 762mm long without the LCD.
why are you blurring out the moderator you just cant show installing it right?
yup.
Make video on snowpeak mod mk7 pcp 🙏
Snow peak good PCP m60
yes, mine is very accurate.
A minha tive a infelicidade que trincou o bloco da minha m60b e agora não acho aonde compra outro bloco
I am sorry to hear that. Maybe email Wes of Airgun Archery Fun and see if he has an extra block.
Sweet 😊
Thank you for your continuing support to my channel.
@ARP-airriflepestings I watch it because it's very interesting to see another fellow shooter develope his shooting skills 😉 I've shot for 40 years but not much with pcp and you have tought me a few things ,and your videos are interesting
@@crazycressy7986 Thank you. I am learning as much as I can on every outings. Glad to take you along with my pest control work, lol. I have to edit my older videos and repost because of issue that I got myself into recently. So, I apologize if you are watching some re-runs, lol.
@ARP-airriflepestings UA-cam give you some hassle?
@@crazycressy7986 no, something else which I can't comment on, lol.