The Wads are B&P Steel wads. The powders are not SIPEn nor S4n, those are used for much ligher loads, 32gr-34gr, they are both gray but they have small square flakes. S4n and SIPEn due to their high nitroglycerin content tend to be sticky in the shell and usually come out as one mass together (same like TECNAn). The powders look like one of the US made powders like Hi-Skor, difficult to say which though since they all look the same. 🙂
3" steel size 1 shot are OK through my B725, 3.5" ?42g steel are like cannon shells and took me by surprise as it was the first cartridge I ever shot after getting my licence, fortunately it was a gas semi auto, or I would have given up there and then!
Great videos as always mate! Keep it up! Does shooting sports UK have cheap SxS’s? Like sub £60? I’m in the market for one for the channel, I would link shooting sports UK in the videos of course! Bob.
Go talk to the guys at the stretton shop, there is a rack of old stuff in the back, my advice would be don’t link to the shop, it’s against UA-cams terms, I got a strike and had to remove them.
You should do a review on the fiocchi ultramagnums 63g 3.5inch id like to see that thank you.
The Wads are B&P Steel wads. The powders are not SIPEn nor S4n, those are used for much ligher loads, 32gr-34gr, they are both gray but they have small square flakes. S4n and SIPEn due to their high nitroglycerin content tend to be sticky in the shell and usually come out as one mass together (same like TECNAn). The powders look like one of the US made powders like Hi-Skor, difficult to say which though since they all look the same. 🙂
Once again, thanks for the info
Would like to have seen the pattern sheets.
Me too, but I have limits to what I can shoot where at the ground
Been using both of these in steel for a few years, The 3& half are good for geese but a gas semi automatic is recommended as they thump a bit
What shot size are you using?
Shot size 1and 3,can't decide which is best on geese for clean kills, The 1s probably edge it
@@ThePhil543 I agree, 1s have worked well for me
3" steel size 1 shot are OK through my B725, 3.5" ?42g steel are like cannon shells and took me by surprise as it was the first cartridge I ever shot after getting my licence, fortunately it was a gas semi auto, or I would have given up there and then!
One hell of a first shot
3 1/2 lead out of a benelli nova Wright at 105 foot pounds of energy yikes.
More like 4232 foot pounds, or are you talking per bit of shot?
Great videos as always mate! Keep it up!
Does shooting sports UK have cheap SxS’s? Like sub £60?
I’m in the market for one for the channel, I would link shooting sports UK in the videos of course!
Bob.
Go talk to the guys at the stretton shop, there is a rack of old stuff in the back, my advice would be don’t link to the shop, it’s against UA-cams terms, I got a strike and had to remove them.
Those look like B&P's steel wads
They are indeed